-Sight Mount (SM-80/SM-210/SM-270)

The sight mount has two mounting points and will require drilling one 4mm hole. MLOK HW included. Simply insert T-nuts inside the tunnel floor of the SM and secure it using the provided MLOK screws, inserted from underneath the handle hole upward into mount. 

- Ammo Saddle (Shell Holder) (AS-5/AS-7)

This shell holder requires no hardware and is installed by simply aligning the locking tabs with the back MLOK slot and inserting saddle into position. The handle has to be removed to allow saddle to be inserted. Once the saddle is secured in place it is permanent. The only way to remove the saddle without damaging the handle is to use a punch and hammer to break the locking tabs. Please keep in mind before purchasing.

- Offset Mount (OM-1/OM-2)

OM is installed inside of the MLOK slots and secured using MLOK H/W (included) with the T-Nut inserted into premade slots in back of the adapter. It will also Include 2 washers to help prevent H/W from damaging the handle slots.

The distance from the surface of the handle to the mounting surface of the offset adapter:

• OM-1: 7.5 mm (more flush fit)
• OM-2: 9.3 mm (additional clearance for light accessories with larger screw heads)

NOTE: PLEASE REFER TO EACH INDIVIDUAL LISTING FOR MORE INFORMATION

Disclaimer: This product is a custom 3D-printed adapter designed to fit the Kel-Tec KS7 OEM carry handle. While every effort has been made to ensure the accuracy and safety of this product, the buyer assumes all risks and liabilities associated with the installation and use of this adapter. The seller is not responsible for any damages or injuries that may occur as a result of improper installation, modification, or misuse of this product.