Description of adhesive film material and sealing temperature:
1, PE (polyethylene) : 170 ℃
2, PP (polypropylene) : 170 ℃ ~ 200 ℃
3, PS (polystyrene) : 180 ℃
4, easy tear film: 120 ℃ ~ 180 ℃
5, PET (polyester) : 160 ℃ ~ 200 ℃
3.Usage of cup sealing machine:
(1) wear adhesive film
1.To get the film, confirm the direction of the film winding, find out the counterclockwise direction, and put it on the rubber film rod fixed.(please turn off the power when wearing the film)
2.Pay attention to whether the fixed splint before and after the rubber film is tightly combined with the rubber film. If it cannot be tightly combined, it is necessary to put the bevelling Angle of the inner side of the rubber film paper tube into the plastic film with an aesthetic knife.
3.After putting on the film, use the tape to firmly stick the film on the feeding paper tube.
(ii) sealing operation procedures (instructions for panel operation)
1.Turn on the power supply of the cup sealing machine, turn on the power switch, and the indicator light will be on.After the hot plate to the expected temperature, constant temperature indicator red (sealing machine at work, in a state of heating and heat preservation alternating electric heating device, green and red indicator light is alternating, according to this belongs to the normal phenomenon).
2.Will be under the cup into the slip board, press automatic control switch, lower die board automatically entered into, after touching the trip switch, upper die automatically after receiving signal down the sealing, touching the travel switch delay under pressure for a second, automatic reset, touching the stroke switch, upper die motor stop. Film motor start turning, turning scheduled length, by electric eye control film machine automatically stop, press the semi-automatic control switch, need to press the start button to start a cycle.
3.Press the stop button in any case, then the bottom die slide will automatically slide out of the machine.
Four.Matters needing attention:
1. Connect the ground wire to ensure electricity safety.
2. When the machine fails, the power should be turned off first, and normal temperature should be restored before troubleshooting.
3. Do not put your hand between the upper and lower molds during the use to avoid pressure or scalds.
4. The movement of the cup push die must be stopped at the high point of the upper press die.
5. After pushing the template cup into the innermost part, it is not allowed to bounce back, otherwise the upper and lower modules will be damaged.
6. The operating voltage must be maintained at 220V plus or minus 5%.
Five.Cleaning and maintenance:
1. Regularly clean the surface, bottom plate, bottom plate, bottom plate, bottom plate, groove, upper die inner pressure plate and positioning rod of the machine platform (note: power supply must be turned off and normal temperature restored).
2. Regularly add butter to drive parts such as bottom die slide, groove and guide rail to ensure the usability of the machine
3, cleaning teeth knife method: first, the lower die with pily ball drain plug, pour boiling water into lower die groove, filled, and then push the slip board in place, the upper die down, the pressure to low, let the serrated knife for several minutes until clean.Over and over again.
Notice: Because,the international air shipping forbid to ship liquid,powder and batteries, If you purchased goods containing such items, we will not be putting them packing. Thank you for your support.
Payment must be made within 12 days after the auction/bid ends, or eBay will open Unpaid Item case automatically later.
Please read this before buying International Shipping may Be Delayed Due to Customs. Customers are Responsible For All Import Charges, Tariffs, Duties, Taxes, and Fees Associated with Import of the product. Shipping Charges does not include any Import Charges, Tariffs, Duties, Taxes, and Fees Associated with it. We are not responsible for undeliverable address.
We reserve the right to charge the shipping fee again for returned items due to wrong address.
Items are generally shipped within 10 business day after your payment has been cleared (Sat. & Sun. excluded.)
Dear friend, your happy is very important to me!.we stand behind every product we sell.Your bid is a contract - Place a bid only if you're serious about buying the item. If you are the winning bidder, you will enter into a legally biding contract to purchase the item. If payment is not received within 7 days, item may be offered to the next highest bidder or relisted at the seller's sole discretion.If you're not pleased with your purchase, we'll be happy to make an exchange or refund the product price less S&H within 7 days of your purchase. For any exchange or refund, we need the original receipt or a record of the purchase in our system, and the product must be in its original condition, including the box, packaging, and all accessories.Shipping and handling charges are not refundable.
We are professional EBAY sales team and lots of ebay buyers very satisfied with our services.You can enjoy top-quality product and high-quality services from us, Trust me that you will have a pleasant shopping experience in here.
Please contact us with any comments, questions or suggestions that you may have bysending ebay message, All the mail will be replied within 24 hours. Please ensure your mail box would not blocked / filtered our mails.we will be happy to assist you.please feel free to contact us for WHOLESALES deal,we will surely give you a satisfatory price.We would try our best to serve you with any question / problem. Please contact us first before leaving Negative / Neutral Feedback or open any cases.We work 6 Days a week From 9:00am - 6:00pm Monday - Saturday CHINA Time.
