Name
|
Bluetooth Antenna Analyzer
|
Condition
|
New From Factory
|
Model
|
Mini60
|
Size
|
9.1 * 5.3 * 2.5cm
|
Power
|
3.7V Li-on 1500ma Battery (rechargeable)
|
Support
|
For Android 2.2 -4.0 or new version, 3-10 inch mobile phone and tablt and Windows via software.
|
Weight
|
220kg
|
|
Bluetooth Connection Method:
|
The installation software Andrews. |
Press the SET button to open the talent PC link. |
Press the DOWN button to confirm dc plug in the Bluetooth antenna head. |
Open the Bluetooth phone paired with the day assigned for 1234. |
Open Android software click the link prompts the connection point of the scan is completed successfully. |
|
Precise and self-calibrating reflect meter design measures forward and reflected signals and impedance data. |
Display 2x16 with optional backlight. |
Precision DDS signal generator (AD9851) used as signal source. |
USB port only for battery charging. |
Buzzer. |
|
Manual control option displays SWR and complex impedance at selected frequencies. |
Automatic scanning results displayed as frequencies of lowest SWR and complex impedance. |
Battery operated for field use or use external 13.8V wall adaptor. |
Power saving modes. |
Multi-point calibration for better accuracy. |
|
Measure antenna electrical parameters: SWR, impedance (resistance + reactance), capacitance, inductance. |
Measure feed point impedance. |
Measure ground loss. |
Adjust antenna tuners and determine loss. |
Measure inductors and capacitors. |
Measure coaxes transmission line (SWR, length, velocity factor, approximate Q and loss, resonant frequency, and impedance). |
Measure and determine optimum settings for tuning stubs: SWR, approximate Q, resonant frequency, bandwidth, and impedance. |
Determine characteristic impedance of transmission line. |
Determine length of ? and ? wave phasing lines. |
Coaxial Cable Loss. |
Determine antenna tuner loss. |
Measure balun loss. |
Measure inductor. |
Estimate quartz crystal parameters. |
Measure magnetic loop resonance and SWR. |
|
Frequency Generation & Control:
|
1-60 MHz. |
Source impedance: 50 Ohms. |
Stability: +/- 100 ppm. |
Spectral Purity: Harmonics down >- TBD dB beyond 60 MHz. |
Step Size: User configurable increments of 100 Hz, 1 kHz, 10 kHz, and 100 kHz. |
|
Usable Measurement Range:
|
SWR
|
1.0 to 9.99
|
Impedance
|
approx. 5 to 2000 ohms
|
Adjustable
|
2.0 Volts pp (typ).3.7V Li-on battery
|
External
|
12 to 14 Volts DC, 500mA
|
RF Output
|
Power Supply: DC 12-14V
|
|
Pushbuttons (5)
|
"Mode", "Band", "Config", "Scan", "Up", "Down"
|
Switch
|
"Power On"
|
USB
|
Mini-B receptacle
|
External Power
|
2.1mm Power Jack (center pin positive)
|
|
1 X Bluetooth Antenna Analyzer. |
1 X Software. |
|