Why purchase a recycled keyless entry remote transmitter?

The vehicle keyless remote key fob you are going to purchase from us is pre-owned; aka: used, previously loved ;). We recycle OEM and aftermarket keyfobs and put them through a concise refurbishing process so we can guarantee our products are delivered to you in a ready-to-program state. We offer these car clickers at a significant cost savings to stealerships so you can keep your hard earned cash for something more fun while lightening your ecological footprint ☺. We call that a win-win! Why wait? Add some convenience to your daily routine and help save the environment, order your recycled car remote control today!

Installed RKE System Type: Please be sure you have an AFTERMARKET (RKE) remote keyless entry system. If your current remote looks the same then this will work. Other options include: Dealer Installed or Factory. The system installed in your vehicle will CHANGE the required remote. If you are unsure send us a message with your current remotes FCC ID and Part # and LED Light color. If you no longer have your remote then send us a message with your system brand, and system id #. 

What are you purchasing? This is ONE (1) replacement keyless entry remote control that will work with your AFTERMARKET installed RKE system. 

Compatibility: Works with vehicles that use a compatible aftermarket RKE (remote keyless entry) system installed. See our compatible system list below or match your current remote FCC ID and / or part # or circuit board # and LED Light color (if applicable)to the numbers listed below. 

Manufacturer

Autopage 

Auto-page 

Compatible FCC ID#(s):

FCCID FCC ID H5OT21 H50T21

Alternate Spellings

SLRF41

Part #(s)

SL-RF41

Alternate Spelling: H50T21

Silencer Security key for 5900-6900 code B4 Frequency: 433 LED Color: Blue 5 buttons 

Dealer #(s)

5 button, 1-way transmitter

Split metal keychain holder

Blue LED indicates when the remote is transmitting

433mhz with code hopping technology

Supplied with required CR2032 battery

Compatible with Silencer models SL-2, SL-3, SL-42, SL-5, SL-52, SL-6, and SL-62 alarm and remote start systems

SLRF41 Spec List:Transmiter frequency: 433mhz

Code combinations: More than 2 billion

Power supply: CR2032 battery (supplied)

Number of buttons:(5)

Basic Operation: Arm/Lock, Disarm/Unlock, AUX channel activation, Remote panic, Remote start/stop

Nominal range: Up to 1/4 mile

Requires programming: Yes

FCC ID: H50T21

Mfg model number: SL-RF41

Button Count:

5: Lock, Unlock, Trunk, Start, Side; LED Green

Battery (installed):

1; GP23A

Frequency:

433 - 434 MHz

LED Light Color:

Blue

Condition Notes:

New Blue LED 5Btn 665Ano  ready to program

Compatible Aftermarket Installed Systems:

Compatible with Silencer models

SL-2, SL-3, SL-42, SL-5, SL-52, SL-6, SL-62

SL-3S,SL-52S,SL-5S, SL-62S,SL-6S,

alarm and remote start systems

This remote will work with the following aftermarket installed keyless entry /alarm system:

AutoPage C3-RS730

Autopage C3-RS625

Autopage RF-215

Autopage RF-220

Autopage RF-315

Autopage RF-420

Autopage RS-610Plus

Autopage RS-615

Autopage RS-620

Autopage RS-622

Autopage RS-650Plus

Autopage RS-660

Autopage RS-662

C3

Autopage RS-665

Autopage RS-725LCD

Autopage RS-727LCD

Autopage RF-1050KE

Autopage RF-1055KE

Autopage RF-105KE

Autopage RF-420LCD

Autopage RF-305

Autopage RF-310

Autopage RF-405

Autopage RF-410

Autopage XT-42LCD

Autopage XT-59

Autopage XT-60

Autopage XT-61

Autopage XT-62

Autopage XT-65S

Autopage XT-72S


Programming: Please note not all customers will be able to complete the programming on their own so if you are having trouble or unsure diagnostic programming is available at your local qualified automotive locksmith or car/audio shop.

Programming Instructions:

Step 1: Turn the ignition switch OFF/ON 3 times & stay in ON position within 15 seconds. 

Step 2: Push the Valet switch 2 times & hold it in on the second push, release the Valet switch when a long chirp is heard. 

The Autopage keyless remote is now in transmitter programming mode. 

Step 3: Press the lock button on the transmitter until the siren (in the car) responds with a confirming chirp.  

The transmitter is now programmed to the car. 

Step 4: Turn ignition to OFF position or leave it for 15 seconds.  3 long chirps will confirm the system has exited programming mode. 

Note: If more than 4 transmitters are programmed, the system will only keep the last 4 that are programmed. 

Note: The VALET SWITCH is a little RED push button that should be mounted under the lower left side of your dash or in the lower left kick panel near the E-brake pedal. If you do NOT have a VALET BUTTON PLEASE CONTACT YOUR LOCAL CAR/AUDIO SHOP FOR PROGRAMMING.


Why does your vehicles installed RKE / Security system determine which remote control your can purchase?

The remotes job is to pair with your vehicles installed RKE system. It will only sync to a matching system; therefore, you cannot purchase a different type of remote than the remote manufactured with the system. It will not pair with a foreign system. 

Programming: 

We will send you information on how to locate programming requirement/instructions for your make, model, and year vehicle. Some vehicles have DIY (do-it-yourself) programming instructions available. While other vehicles require diagnostic programming which is available at your local qualified automotive locksmith or dealer. 

Programming Requirement Information NOTE: 

The vehicle manufacturers determine the programming requirements at the time of manufacture. We pass the programming requirements / instructions on to you as a courtesy. We do not write the programming nor do we determine which vehicles require diagnostic programming and which vehicles can be programmed by the you (DIY). We are not locksmiths nor mechanics nor are we familiar with EVERY vehicles program sequence. If you have questions:

        1. Check your Vehicle Owners Manual for OEM Factory remotes or The User Manual for Dealer Installed or Aftermarket RKE systems.

 2. YouTube has many video postings from do-it-yourselfers to assist with all kinds of questions & most customers find if very helpful to WATCH the programming being done which can eliminate mistakes in the sequence. 

To locate the programming for your vehicle via this method go to YouTube and once there in the search bar type in the following:

i.      If you have a factory RKE system: your make model year + the words program remote (i.e.: 2005 Ford Mustang program remote)

ii.      If you have a dealer installed or aftermarket RKE system: the FCC ID or system type + the words program remote (i.e.: ELVAT5C program remote or AS200 program transmitter?)

 3. For OEM FACTORY installed systems: send us an eBay message with your vehicles make, model & year = we can pass on to you any programming information requirements we have on hand. 

      

 4. For DEALER INSTALLED RKE installed systems: send us an eBay message with your remote controls FCC ID # and PART# and the vehicles make, model, & year = we can pass on to you any programming information requirements we have on hand (the programming for dealer installed RKE systems will be different than Factory or Aftermarket installed RKE systems).

     

 5. For AFTERMARKET INSTALLED RKE installed systems: send us an eBay message with your remote controls FCC ID # and PART# = we can pass on to you any programming information requirements we have on hand (the programming for aftermarket installed RKE systems will be different than Factory or Dealer installed RKE systems).

      

6. There are also many auto forums that you can go onto by just conducting a google search with your questions.

       

7.  or a local automotive locksmith or your local parts/car/audio store will typically be able to assist you if you are trying to avoid the dealer.