100*20mm Portable Metal Pneumatic Dot Peen Marking Machine For VIN Code Frame Marking Machine chassis number 220V/110V

Need customers equipped with computer and gas source by themselves
Support system: Windows XP or Windows7
Working range: 100 * 20mm
Thickness: 0.01-1mm (depending on material)
Directions: up and down, right and left, flat surface, fan-shaped
Applicable to the workpiece: various  kinds of motorcycle engines, beams  and so on
Power: 220v 50Hz 200w
Operating temperature: -10 ℃ -45 ℃
Weight :8Kg
Packaging size:160*110*120mm
Equipment structure: double handle, V-type card tube design
There are two types of marking machines:
1. Round tube support (printing round tube)
Note If you need to remark when placing an order for this product or contact customer service
2. Frame support (printing plane)
Note that we send this product by default

installation of industrial marking system control software

First step: put the installation CD in the CD-ROM of the computer and run it,Second step: double click the  icon, then  click the "install［］" button  and continue  the steps as the following pictures show till the installation is finished.

Third step: double click the  iconThe USB driver will be installed automatically when the industrial marking system control software is installed, and it is finished when  closed by itself, see the following picture:Then you can use the marking machine

Application of of the industrial marking system control softwar

Double click the icon, which shown on the desktop, industrial marking system control software will starts, wait for several seconds, the main interface of industrial marking system control software turns up as the following:this is the master file operation button of the industrial marking system control software, click it to open the file menu,all the related function about file operation are included here, like the FileOpen, FileSave, etc.  these are the function panel , click the corresponding button to change the function panels

This is the function panel of the industrial marking system control software, different option interfaces are showed here.

The blank editing area at the center of the industrial marking system control software is the same size with the real marking effect. It is showed 10mm x 10mm/ quadrilled, this is also the Max marking range of this marking machine.

 

The nethermost of the industrial marking system control software is status bar, which shows the information cue and marking count.

Two: operation of the industrial marking system control software

6.1 QuickStart.

Here we will introduce  how to easily create a  text Mark  and a SD serial Data  Mark, then how to  adjust the needle to make sure the marking place on the work piece.

Click ［mark］ button in the［add mark］function panel, a marking type list will turn up for you to choose the marking type, here we choose the first "text", then click the left mouse button at the blank area ( also called mark editing area) of the industrial marking system control software, a text mark is built with the default parameters.

Notice the ［mark］function panel, the related parameter of the mark we built just now has been showed in  the ［mark］group.

Please keep the words in the area.adjust,you can change the direction,for example,change it to,and it will be adjusted like the below:

Also,You can move the words by moving the mouse.

The parameters of the ［mark］function panel will change with different marking types. And the parameters in above picture are about the [text］type mark we built just now, which contains the marking place, marking content, marking font, etc. Till now the ［text］has been built successfully.

 

Now, with the same way, we build a SD Serial Data mark.  Also choose ［text］in  the marking type list, click the left mouse button at the mark editing area, then change the ［content］ parameter in the ［mark］function panel from the acquiescent "ABC123"to "12345",(but this step is not required, our aim here is to show the difference between the text mark and SD Serial Data mark. Then, click the ［Coder type］button on the right side of the ［mark］function panel, at this time the mark "12345"changes to red, which means the mark type is SD Serial Data, at the same time, you can see the the related SD Serial Data parameters in the ［Coder］group of the ［mark］function panel. See the picture below:
The parameters are relative to the coding type of the mark, it is different coding types have different parameters. The picture above is SD Serial Data related parameter. Till now the SD Serial Data mark has been successfully built.

In the editing area, the mark you built may be like this:

Maybe the marking place you built is different from the example above, no matter, you can move the the last built mark with the directionkeys, and every click can move the mark 1mm. During the moving process, you can see the the marking needle will move with the displacement of "12345", and every time you change the marking place the marking needle will adjust accordingly.

 

There is an easier way to change the marking place. Click the mouse to choose the marks, then the marks will be enclosed by outline border, press on the left mouse button to choose the mark enclosed by outline border without release, drag the mark to a new place. And also the marking needle will move accordingly.

With the automatic adjustment function of the marking needle you can move the marking place conveniently according to the real marking place on the workpiece.

Move the two marks to the suitable place, then we try to mark these two marks on the workpieces, the marking operation is easy, just click the ［mark］button to open the rotary printing  function panel or directly click the shortcut key for the marking emotion ［F9],  at this time the marking machine starts to work and mark the two marks we built on the workpiece, a moment later, you will find the SD Serial Data mark has changed like the following picture:

The SD Serial Data changed from "12345" to "12346", and this is the function of the SD Serial Data coding, every mark with SD Serial Data coding will automatically totting up a number, if you do not change the the parameter of the  SD Serial Data coding, the totting up number will be "1".

So far, we have get a general knowledge about the usage of marking system control software, and more functions of the software will be introduced particularly in the following chapters.
 

2.2   File operation

Click the file operation master button of the industrial marking system control software, the file menu turns up like the following picture:

 

a.  New: create a new file, if the file being edited has not been saved, there would be a prompt to save the file

 

Open: open a file as the following picture:

"open" window will list all the marking files in the related folders, choose one, click the ［open］button or directly press the ［Enter］button the file can be open.

C. Save: save the current file in the computer, see the following picture.

"save" window has listed all the marking files in the related folders, enter a file name in the "filename" field, then click the ［save］button of the window or directly press the ［Enter］button the file can be saved

Notice: Save function can only be carried out when the file content is changed.

D. Save as:  save the current file with another name. Operation is the same with ［save］.  

E. Recent file: This listing shows several files used recently, you can find them here easily .

2.3 Establise and Edit the Mark

2.3.1 Create the text marks

          The content of text marks including English characters, Numbers, symbols, and Chinese characters, at the same time has the font-related parameters. Engraving control software contains two text markers,one is the standard [the text], another is [fan text].this two kinds text has the most similar parameters, the difference between them just the different arrangement,the standard [text] marks arranged in the commen straight way,but the [fan text] was arranged according to the specified beginning angle and fan radius.This two types marks can be chooiced by click the [add tags] button on the pop-up list of tag types chosen,as follows :

Tips: Once the mark's type was chosen, will not be changed .

Here we will introduct the method of using the [text] and [fan text], because of their similar establistion and edit.After chosen the text's type,it's associated parameters will be displayed in the [tag] panel, This had been introduced in 2.1. Here we describe each of these parameter as follows:

  1. Content : As the name suggests, here you can change the text tag.

  2. X,Y,Z : These three parameters used to specify the marker position in the engraving area. this position will be various according to the text type, under standard [text] mark, this position marks the lower left corner,while [fan text] marks the fan-shaped arrangement of the center of a circle.Here pay attention to the Z, Z will be working after run the lift  function which in the Z,when the machine you have had this lift function, Z will be able to set the tag engraving plane height.

  3. Angle: Mark around the specified position X, Y rotation Angle,as for [fan text] this angle just the angle of initial fan arrangement.

  4. English fonts: The name for the tag content in English, numbers, symbols.

  5. For BMQ0212B,recommend font:No.17 STENCIL

  6. Word height,word width: The size of characters in tag content,need to note, the word height and width can not be absolutely limit the size of characters, t's just a reference size, the actual word height and width,will vary due to changes in different fonts. For example when the word-wide are set to 5mm, the numeric characters "1" ,it's generally not up to 5mm in width, but the width will be change when the font is different. For example the font "ISOCP.TEF" of the numeric characters "1" wider than the font "STENCIL.TEF" the number of characters "1".as follows:

  7. Word space: the distance between characters which in the tag content.

  8. Radius [fan text]: The radius of the fan-shaped outer tangential.

Character direction[fan text]: When under the fan-shaped arrangement decide the characters towards the center of the circle or a departure from the center of the circle, the effect of different directions as follows:

   Characters out           Character inward

2.3.2 Encoding of the text marks

     Only the correct definition of words can mark, mark coding for non-text will without any significance, [mark coding] will decide words in every class after complote the engraving character,as a "serial number" of the code in the text will marked after complote each marker automatically add value "1".

     Tag coding can be used [tag] panel [code] button to select

     Text mark has four kinds of codes, as follows:

  1. Non-coding: This means that the content of this tag does not require an engraving after the complete each change, so this code has no argument.

  2. Serial number: Generally speaking, the "serial number" are formed by a number of characters, or at least by the end of the content of the digital characters,if the tag is not a number at the end of the content of character, this tag will not be able to mark,because its content does not meet the "serial number" of the encoding format,  "The serial number" of the code in the text, each signet mark after all will conduct a numerical results of the computation of the parameters of the serial number ", "to decide.

    1. Incremention: Tag content values at each value of the increase in the amount of computing time, generally speaking is 1.

    2. Repetitions: The frequency of the calculation for the tag content.

    3. Min: Tag content allows the value of the minimum, if the result is less than this value after the operation, the result will automatically change to the minimum value.

    4. Max: Tag content allows the value of the maximum, if the result is biger than this value after the operation, the result will automatically change to the minimum value.

5.Taboo Number: Provisions which are not allowed to appear in a marks,for example some geographic taboo figure "4 ",Here you can enter "4",in operation, the tag content will be automatically skipped the number "4".such as "123" directly changed to "125."after the engraving completed.

Note: No matter how the tag value of the contents of operations will not change the character length of the tag content,this means that, when the serial number "AB9999" increase "1" would become "AB0000", rather than the "AB10000".

  1. VIN:VIN(Vehicle Identification Number),chinese name called vehicle identification code,it's a factory marked on the car in order to identify and designate a group code,VIN codes is composed of 17 letters and numbers which in a certain rules,the first nine for inspection, VIN encoding parameters and the "serial number" is basically the same,the difference is that, VIN serial number can set the length of the code which at the end ,for example, when the serial number length is set to 4, after VIN Code "ABCDEFGH7JK889999" completed, will change to "ABCDEFGH2JK880000" rather than "ABCDEFGH8JK890000".

  2. Date: Date encoding type will be directly changed to the content of markings accordance with its only "format" parameter,no matter what the content tag, will be to change to the date which the  "format" specified."Format" is a special code formed by a group of characters, which determines the format of the characters marked in the contents,formatting characters, see Appendix 1 definitions.

 

2.3.3 Establish the graphic mark

 

     Establish the graphic marks has the same method with the text marks,but the graphical marks's parameters is totally difference, select the graphics from the graphic's list, then in the tag editor by clicking the left mouse button area,then an empty tag graphics will be created.In the [tag] panel, click [Browse] button to open a file dialog, and then in the file dialog to select a suitable graphics file, graphic mark will be successfully established.

Parameters X, Y, Z, the meaing of the rotation angle is same with the text mark,"Width", "height" is used to determine the actual appearance of the graph size,"Keep ratio" option will always keep the original graphics internal ratio,this means that when you change the width of the graph, the high proportion of graphics will be automatically calculated by the graphic itself.Similarly, when you change the height graphic, graphics, the width of the graphic itself, the ratio will also automatically calculated.