60W Limit Switch DC 12V 24V 36V Motor Manual Controller Motor Remote Control Switch Forwards Reverse Up Down Stop With 433mhz Remote control

Specifications:
Working Voltage: DC 12V-36V
Receiver color: White
Shell material: ABS
Working Current: 48ma
Quiescent current:16ma
Max Load: Recommend load less than 5A (60W)
Frequency: 433.92Mhz
Operation temperature: -10℃ ~ +60℃
Brushless motors not supported
Remote battery: 2* CR2016 batteries
Remote control distance: 10m~50m

Features:
1. Wire the Normally Open Limited to the External Button Pin ( U--S--D--GND) make your motor Forwards Reverse Cycle.
2. Original State OFF, (Suddenly, the electricity was cut off, then comes again, the State still is OFF, you need manual turn it ON).
3. If you don't need wire the Limited Switch, you need connect the UP Down and COM with a Line, we have connect it before we ship out ,if you need use it take away the line that is ok.
4. When the receiver output state is "Latched", we have set it 0.5s time delay for forwards and reverse, it is the Protection function.
5. Out State: Momentary Toggle Latched Adjusted by the Jumper on the Receiver.
6. We ship default as Latched, if you need use Momentary to change the Jumper on the Receiver ,Notice, please don't use Toggle.

Model switching:
Momentary Model:
Momentary----------Jumper on "1&2"
Press button"Up", the Motor Forward, Release is Stop.
Press Button "Down", the Motor Reverse, Release is Stop.
Latched Model:
Latched-----------Jumper on "3&4"
Press button "Up", the Motor Forward, Press Button "Stop" is stop.
Press Button "Up", the Motor Reverse, Press Button"Stop" is stop

Instruction Manual:
1. Clearing Code: PRESS the Learning Button for 5s,until the receiver indicator light flashes 3 times and goes out,it mean Clearing Code
(If you want to keep the original remote control and only add a remote control, there is no need to clear the code).
2. Learning Code: Firstly,Press the learning button once,The indicator light will stay on all the time, entering the code checking state.Then press the first button of the remote control (the system defaults to forward rotation),
The indicator light flashes 3 times and remains on,The learning is successful.
Second: Press the second button of the remote control once (the system defaults to reverse).The indicator light flashes 3 times and remains on, indicating successful learning,The learning is successful.
Third: Press the third button of the remote control once(the system defaults to the third button stopping),The indicator light flashes 3 times and remains on, indicating successful learning,The learning is successful.
Fourth: Press the third button of the remote control again. The indicator light flashes 3 times and goes out.The remote control learning and code matching are all completed.

Package include:
1x DC12V-36V Wireless Receiver
1x Remote control

Note:
*For your convenience, the remote control and receiver have been paired.
*Only the above package content, other products are not included.
*Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
*Don't operate control buttons rapidly and frequently , because the controller is controlled.
by microprocessor , each operation state will response in 1second.
*If discover the LED lights darken or remote distance shorter, please replace the battery.