Overview
1, the use of high-speed microcontroller to do voltage sampling test, and drive LED lights to display the voltage (by no means other products on the market using the purchased voltage meter head, separate installation) to achieve board integration, reduce the bad rate (due to constant current, only the voltage display function.)
2, 0-300V adaptive voltage, suitable for most series-parallel lamp bead test. When testing, the use of progressive start, the voltage automatically adapts, the current gradually increases, will never burn the lamp beads, three to five seconds after the normal brightness. Light bar, light beads, positive and negative polarity connected to reverse, not burn the light bar and light beads.
3, digital display real-time voltage output, with adjustable voltage inside, the voltage value can be self-corrected. Digital meter using green light-emitting tube, the display for 00 is a short circuit, display 300V is an open circuit. The same LCD TV of each group of LED light bar display voltage should be the same.
4, hot and cold ground isolation, never electrocution. Power cord and box integrated design, easy to carry out.
5, you do not have to remove the screen, light up the LCD TV screen. (There are bad lamp beads of the same screen lit, LCD TVs are generally divided into several groups in parallel, you can see which group voltage is different through the voltage, so as to determine which group of LED lamp beads are damaged)
6, the test, due to the high-bright version, please do not look directly at the lamp beads. To avoid injury to the eyes
2, 0-300V adaptive voltage, suitable for most series-parallel lamp bead test. When testing, the use of progressive start, the voltage automatically adapts, the current gradually increases, will never burn the lamp beads, three to five seconds after the normal brightness. Light bar, light beads, positive and negative polarity connected to reverse, not burn the light bar and light beads.
3, digital display real-time voltage output, with adjustable voltage inside, the voltage value can be self-corrected. Digital meter using green light-emitting tube, the display for 00 is a short circuit, display 300V is an open circuit. The same LCD TV of each group of LED light bar display voltage should be the same.
4, hot and cold ground isolation, never electrocution. Power cord and box integrated design, easy to carry out.
5, you do not have to remove the screen, light up the LCD TV screen. (There are bad lamp beads of the same screen lit, LCD TVs are generally divided into several groups in parallel, you can see which group voltage is different through the voltage, so as to determine which group of LED lamp beads are damaged)
6, the test, due to the high-bright version, please do not look directly at the lamp beads. To avoid injury to the eyes
Specification
Name: LED lamp bead light bar tester
Input voltage: 85-265V
Output voltage: 0-300V
Power: 18W
Output voltage, current automatic detection.
Product use: No disassembly screen LED backlight LCD TV maintenance testing lamp beads lamp strip lamp board lamp strip tester point lighter, can test any size LED backlight and lamp beads. High brightness, no need to remove the screen can determine the backlight is good or bad.
Name: LED lamp bead light bar tester
Input voltage: 85-265V
Output voltage: 0-300V
Power: 18W
Output voltage, current automatic detection.
Product use: No disassembly screen LED backlight LCD TV maintenance testing lamp beads lamp strip lamp board lamp strip tester point lighter, can test any size LED backlight and lamp beads. High brightness, no need to remove the screen can determine the backlight is good or bad.
Operation
Adaptive voltage, current, automatic identification of lamp beads and light strips.
Input voltage:85-265V AC. output voltage:0-300V DC 0-19V DC
Can test lamp beads and a variety of good and bad light board, light bar (individual lamp bead damage as bright as possible)
Short connection sac pen positive and negative three seconds, high and low voltage switching
Adaptive voltage, current, automatic identification of lamp beads and light strips.
Input voltage:85-265V AC. output voltage:0-300V DC 0-19V DC
Can test lamp beads and a variety of good and bad light board, light bar (individual lamp bead damage as bright as possible)
Short connection sac pen positive and negative three seconds, high and low voltage switching
Note
1. Please use 19V to detect the positive and negative poles when you are not sure of the positive and negative poles, prohibit the use of 300V voltage detection, 300V voltage may lead to damage to the equipment short connection sac pen positive and negative three seconds, for high and low voltage switching
2. free screen LED backlight LCD TV repair test lamp beads lamp strip light board light bar tester 0-300V high brightness free screen version: input voltage: 85-265V, output voltage: 0-300V, power 18W. output voltage, current automatic detection. Can test any size LED backlight and lamp beads. High brightness, no need to remove the screen can determine the backlight is good or bad.
1. Please use 19V to detect the positive and negative poles when you are not sure of the positive and negative poles, prohibit the use of 300V voltage detection, 300V voltage may lead to damage to the equipment short connection sac pen positive and negative three seconds, for high and low voltage switching
2. free screen LED backlight LCD TV repair test lamp beads lamp strip light board light bar tester 0-300V high brightness free screen version: input voltage: 85-265V, output voltage: 0-300V, power 18W. output voltage, current automatic detection. Can test any size LED backlight and lamp beads. High brightness, no need to remove the screen can determine the backlight is good or bad.
List
1 x Host
1 x Meter pen
1 x Instruction manual
1 x Host
1 x Meter pen
1 x Instruction manual
- We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
- Payment must be received in 5 business days of auction closing.
- Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
- Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Fill your shipping info
- All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
- If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
- If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.