8 Sets Ceiling Fan Blade Balancing Kit Including Metal Self-Adhesive Gold5984
What you get: 4 sets of 5G fan light balancers (each set contains 1 balance clip, 2 5G balance pieces), 4 sets of 3G fan light balancers (each set contains 1 balance clip, 3 3G balance pieces), sufficient quantity and different weight can meet your daily needs and replacement.
Practical Function: the plastic balancing clip can locate the problem area easily and the 3G, 5G self-adhesive weights can fix the wobbly, balance the weight. Besides, the permanent weights are secured with a very sticky adhesive to prevent falling off.
Multiple Function: this fan blade balance kit is not only prevent the swing problem caused by the irregular blade or blade holder, but also reduce the noise and increase the service life of the ceiling fan blades.
Quality Material: the plastic fan balancing clip is made of quality plastic, the metal self-adhesive 3G and 5G weight is made of metal with a sticky adhesive, strong and durable, not east to fall off, can serve for a long time.
Wide compatibility: this fan blade balancing kit is compatible with most ceiling fans
Using Steps
1. Turn the fan on and set the speed control setting to a speed at which the wobble is the greatest.
2. Turn off the fan and allow it to come to a complete stop select one blade and place the balance clip on it. Halfway between the blade holder and blade tip on the trailing edge of the blade.
3. Turn the fan on Note whether the wobble has increased or decreased. Turn the fan off,move the clip to another blade, and retest. Repeat this procedure on all blades noting the blade on which the greatest improvement is achieved.
4. Move the clip back to the blade that showed the greatest improvement. Move the clip inward and outward on this blade and operate the fan to find the position where the clip gives the improvement.
5. Remove the clip and install a balancing weight to the top of blade al
Practical Function: the plastic balancing clip can locate the problem area easily and the 3G, 5G self-adhesive weights can fix the wobbly, balance the weight. Besides, the permanent weights are secured with a very sticky adhesive to prevent falling off.
Multiple Function: this fan blade balance kit is not only prevent the swing problem caused by the irregular blade or blade holder, but also reduce the noise and increase the service life of the ceiling fan blades.
Quality Material: the plastic fan balancing clip is made of quality plastic, the metal self-adhesive 3G and 5G weight is made of metal with a sticky adhesive, strong and durable, not east to fall off, can serve for a long time.
Wide compatibility: this fan blade balancing kit is compatible with most ceiling fans
Using Steps
1. Turn the fan on and set the speed control setting to a speed at which the wobble is the greatest.
2. Turn off the fan and allow it to come to a complete stop select one blade and place the balance clip on it. Halfway between the blade holder and blade tip on the trailing edge of the blade.
3. Turn the fan on Note whether the wobble has increased or decreased. Turn the fan off,move the clip to another blade, and retest. Repeat this procedure on all blades noting the blade on which the greatest improvement is achieved.
4. Move the clip back to the blade that showed the greatest improvement. Move the clip inward and outward on this blade and operate the fan to find the position where the clip gives the improvement.
5. Remove the clip and install a balancing weight to the top of blade al
