This item is pre-owned – it will work like new once programmed to your vehicle
Remote's original keyring loop is broken
so a Hole has been Drilled to securely hold your
Key Ring - faded button graphics
One (1)
Aftermarket remote keyless entry fob alarm
Transmitter control clicker keyfob controller replacement
Functions at 100% Tested & Guaranteed
Autopage
FCC ID: H50T21 (Alternate Spelling: H5OT21 ) Part #: XT-43LCD or XT-33 (Interchangeable) PART #s:
Frequency: 433 – 434 MHz (433.92) LED Color: Blue 5 buttons
|
Compatible with the following systems:
C3-RS625 RF-315 RF-420 RS-615 RS-660 RS-662 RS-620 RS-725LCD RS-727LCD |
Programming Instructions: Step 1: Turn the ignition switch OFF/ON 3 times & stay in ON position within 15 seconds. Step 2: Push the Valet switch 2 times & hold it in on the second push, release the Valet switch when a long chirp is heard. You are now in transmitter programming mode. Step 3: Press the lock button on the transmitter until the siren (in the car) responds with a confirming chirp. The transmitter is now programmed to the car. Step 4: Turn ignition to OFF position or leave it for 15 seconds. 3 long chirps will confirm the system has exited programming mode. Note: If more than 4 transmitters are programmed, the system will only keep the last 4 that are programmed. Note: The VALET SWITCH is a little RED push button that should be mounted under the lower left side of your dash or in the lower left kick panel near the E-brake pedal. |
100% Guarantee Remote Shipping / Return Policy
Warranty/Returns:
1. We have a 30 day return policy.
2. All returns for replacements and refund need an RMA #.
3. Please contact us before returning items so we can give you the RMA # and the proper return address.
4. No refunds / replacements will be granted without an RMA#
We ensure proper working condition of all previously used or new remotes through a serious of tests performed with the Santronics Testing device. Each button is tested for functionality prior to shipment and then logged.
Please Note: Each remote and circuit board is UV id’d prior to shipment – All returns receive a UV ID inspection to verify originality of remote sent prior to refund or replacement.
Does this keyless remote entry come with a battery?
Yes. It will have a working battery installed.
Battery Condition:
A. All remotes sold on Keyless4u include working batteries.
B. Installed batteries are not tested for battery life- they are simply working.
Some are new and some are used.
Your vehicle will be
installed with one of the following keyless entry systems:
a. Standard Keyless Remote Packages: Installed at time of manufacture.
b. Optional Keyless Remote Packages: Installed by a dealer.
c. Aftermarket Keyless Remote Packages: Installed by previous owner or a car/audio shop.
d. No remote keyless entry system at all.
The above information can change which remote you
need
for your installed remote keyless system.