Specification:
- The wheel adapter set is used on 4 ATV lug 110mm bolt pattern hubs to fit 4 lug 137mm bolt pattern wheels.
- Fit vehicles of 4x110mm bolt pattern. Convert to wheel must be 4x137mm bolt pattern
- If vehicle studs protrude outside the adapters, you may need to cut down vehicle studs.
- INCLUDE: 4 pcs Wheel Adapters + 16 pcs 10X1.25 open ended lug+Hardware included+installation instruction
Vehicle Bolt Pattern: 4x137mm -10x1.25-110mm
Wheel Bolt Pattern: 4 x 137mm
Thickness: 1 inches / 25.4 mm
Thread Pitch: 10mm x 1.25 / 10x1.25 /M10x1.25
Hub Bore: 77.8mm
Studs: 10.9 Grade
Surface treatment: CNC Machined Polished Aluminum Finish
Material: Aluminum
Fitment:
for HONDA:
1997-2009 Recon 250
1988-2000 FourTrax 300
2000-2009 Rancher 350
2004-2009 Rancher 400 4WD
1996-2006 Foreman 400 4WD
2004-2016 Rancher 420 4WD
1998-2004 Foreman 450 4WD
2005-2016 Foreman 500 4WD
2001-2016 Foreman Rubicon 500 4WD
2003-2007 Rincon 650
2006-2016 Rincon 680
for YAMAHA：
1999-2005 Bear Tracker 250
2006-2009 Big Bear 250
1996-2005 Big Bear 350 2WD
1987-2008 Big Bear 350 4WD
1987-2013 Big Bear 400 4WD
2004-2006 Bruin 250
2004-2006 Bruin 350
1995-2010 Wolverine 350
1995-2010 Wolverine 450
2007-2013 Grizzly 350 4WD
2007-2013 Grizzly 450 4WD
2009-2012 Grizzly 550 4WD
2007-2016 Grizzly 700 4WD
1993-2004 Kodiak 400
2005-2006 Kodiak 400 4WD
1993-2004 Kodiak 450
2005-2006 Kodiak 450 4WD
2004-2014 Rhino 450
2004-2014 Rhino 660
2004-2014 Rhino 700
for SUZUKI：
2002-2007 Eiger 400
2002-2009 Ozark 250
2008-2016 King Quad 400
2001-2010 King Quad 450
2011-2016 King Quad 500
2005-2007 King Quad 700
2009-2016 King Quad 750
2003-2007 Vinson 500
Package include:
4 pcs Wheel Adapters + 16 pcs 10X1.25 open ended lug+Hardware included+installation instruction
Features:
1. Built to strict quality control standards 100% factory tested
2. Easy Installation，100% Compatible with OEM Parts, meets Original Equipment Manufacturer (OEM) Standards
3. Gives your machine's body a more aggressive stance and ensures exceptional wheel balance
4. Improves handling characteristics and stability with increased traction for the best performance
5. Fixes brake caliper clearance issues. Increases wheel / tire clearance to allow installation of larger or wider wheels/tires.
6. Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing process to prevent surface corrosion and rust.
Installation Tips:
- Make sure that mating flange on the vehicle’s rotor are completely clean.
- Clean the studs thoroughly and remove any excessive dirt, oil, grease etc.
- Use the thread locker to ensure the nuts secure enough, avoid taking off.
- Please do not use the impact wrench, use a torque wrench to tighten the nut
- It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:
Your lugs studs will need to be shortened by grinding them down
You can replace your studs will shorter studs
if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)
Note:
The vehicle’s wheel studs need to be measured. If the studs are longer than 1.0" (25mm), it will extend past the spacer's surface.
It may not be possible to bolt the wheel safely onto the spacer, depending on whether your wheels have pockets/cavities around the mounting pad.
- If your vehicle does not have 10x1.25 threaded wheel studs, you would need to purchase the correct threaded lug nuts for proper installation.
