This listing is for one long overhead hydraulic hose for BendPak, Magnum by BendPak and Pro Lift by BendPak models MX10CX and MX10ACX ONLY. Please make sure your lift's overall height does NOT exceed 145" or 12'1"
The BendPak MX10 Series is a 3-hose system. First, the short power unit hose goes to a TEE fitting. From the TEE there are two hoses. One short hose goes to the power side cylinder (closest cylinder to the pump) and the hose in this listing is the long overhead hose that goes up, over the top and down to the far side cylinder.
Hose measures 323-1/2 inches.
These are actual photos of the item you will receive.
Product-Lift Compatibility Notes:
This long overhead hose fits 2-post MX10CX and MX10ACX lift models by BendPak, Magnum Lift, and Pro Lift, manufactured in 2003 or later.
The MX10CX and MX10ACX have column of 145" (12' 1") from the floor to the top of the column.
These two models are also the WIDE versions with a total OUTSIDE width across the floor, from outside the footplate to outside of other footplate of 145."
IF YOUR LIFT MEASURES 132" YOU HAVE THE NARROW VERSION, MX10C or MX10AC. You can still use these hoses but note that this long overhead hose will be 13" longer than what is required. You can coil the extra hose to take up the slack.
Please note that these hoses WILL NOT work on any other lift brand or lift model within the Bend Pak product line. They are specifically for the MX10CX and MX10ACX.
Ref: 5570775, BH-7479-350
Features/Specs
- Heavy Duty braided hydraulic hose meets or exceeds OEM standard.
- 5570775
- Hose ID: 1/4"
- Includes female swivel end fittings.
- Cut, swaged in the USA by American workers
Compatible Lift(s)
- Models MX10CX and MX10ACX by Bend Pak, Magnum Lifts made by Bend Pak and Pro Lift made by Bend Pak.
- Will NOT work on any other lift brand or lift model within the Bend Pak product line. They are specifically for the MX10CX and MX10ACX.
