Name：5A Single Edge Spiral Milling Cutter

Material: Integral tungsten steel

Suggested speed: 18000~20000 rpm

Actual setting：99%~100

Suggested feeding speed: 3~5 metres/minute

Applicable materials: Density board, solid wood, wood type

Applicable machines: machine tools, advertising engraving machines, CNC machining centres, computer planing machines, etc.

Blade length selection: In addition to the specification restrictions, the blade length selection beyond the board 2~5mm, too much, the blade is easy to break.

Main features: mirror edge grinding process, large-capacity chip removal groove, sharp edge, wear-resistant, smooth and delicate cutting surface, non-polished, non-stick, smoke-free, odourless, silent

Tool Selection:
To achieve your required purpose, please try to use a short cutting edge tool. Too long a cutting edge or too long a tool body will cause vibration and deflection during machining, resulting in damage to the tool and affecting the quality of the machining. We recommend the use of tools with larger shank diameters.

Tool operation

(1), woodworking milling cutter designed for portable and desktop woodworking engraving machine and can not be used in electric drills, drill presses and other machines.

(2), the tool can be hardwood, softwood, synthetic board and other wood processing out of the smooth surface, but to avoid processing copper, iron and other metal materials and sand, stone and other non-wood materials.

(3), be sure to use the appropriate size of the jacket, wear and tear, not round enough and the bore with a taper of the jacket can not provide sufficient clamping force, will lead to vibration or twisted shank and fly off.

(4), do not think that the new collet must be safe and reliable. When the tool is clamped and found that the shank has uneven contact marks or grooves, indicating that there is slippage and deformation of the jacket bore, then you should immediately replace the jacket to avoid accidents.

(5), the tool clamped, such as the tool is found to work with the phenomenon of jumping, you should immediately stop, repeat the clamping several times so that the tool shank and the jacket to get full contact, and then carry out the work.

(6), the tool shank and jacket contact should be good, the tool shank must be completely inserted into the jacket, tighten firmly, so as to provide sufficient clamping force on the tool. Can not be only a small part of the insertion of the jacket, otherwise it is easy to cause the tool shank fracture and lead to tool damage.

(7), the operation of the use of appropriate eye and ear protection. (8), the body, clothing and other debris can not be close to the tool at work

Tool maintenance:

(1), keep knives clean, after use to remove the wood on the resin, wood shavings and other dirt, the use of standard industrial solvents to clean knives.

(2), Apply a small amount of machine oil can prevent the surface of the knife rust, clean up all the stains on the shank of the knife to prevent slippage in the process of use.

(3) Do not resharpen the knives and change the shape of the knives without permission, because every grinding process requires professional grinding equipment as well as professional grinding skills, otherwise it will easily cause the edge to break and produce accidents.