Features.
1. This booster board is designed with a wide voltage input and output mode; 2;
2. output voltage can be automatically adjusted according to your your light bar required voltage, input voltage is based on the two wiring methods to; 3;
3. with input and output connection line;
4. small size, high power;
5. Suitable for 14 inch -65 inch LED LCD TV universal backlight board.
1. This booster board is designed with a wide voltage input and output mode; 2;
2. output voltage can be automatically adjusted according to your your light bar required voltage, input voltage is based on the two wiring methods to; 3;
3. with input and output connection line;
4. small size, high power;
5. Suitable for 14 inch -65 inch LED LCD TV universal backlight board.
Product parameters:
Input voltage:12-200V
Output voltage:24-400V between automatic adjustment
Size: length 72mm * width 44mm
Input voltage:12-200V
Output voltage:24-400V between automatic adjustment
Size: length 72mm * width 44mm
Wiring instructions:
This booster board is designed with a wide voltage input and output mode, the output voltage can be automatically adjusted according to the voltage you need for your light bar, the input voltage is based on two wiring methods to.
1, the two red and yellow lines together to connect 12V, the blue line to the switch letter (BLON) if it is an integrated board, generally in the back of the board, if you really can not find BLON can be connected to the 5V above the USB, the black line to ground.
2, red wire connected to the motherboard output between 12v-200v, yellow wire connected to 12v, blue wire connected to the switch signal (BLON), black wire ground. Note: input voltage 12v power supply, the light bar voltage can not exceed 100v, if the 24v power supply, the light bar voltage can not exceed 200v, try not to overload the use, so as not to be durable, thank you. Output voltage is automatically adjusted according to the required voltage of the light bar, that is to say, your light bar needs how much v booster plate will rise to how much v to the light bar. Output positive red line to the light bar's positive output of the negative terminal. On the negative side of the light bar.
3, if there are several groups of light bars can be combined together, the above connection is correct, you can rest assured that the power on the machine. If the power is found dark image can be adjusted according to the j1/j2/j3/j4/j5 of the booster board, the j1 solder joints shorted to increase the brightness. Short j2 and will increase. And so on, adjust to the appropriate brightness can be.
This booster board is designed with a wide voltage input and output mode, the output voltage can be automatically adjusted according to the voltage you need for your light bar, the input voltage is based on two wiring methods to.
1, the two red and yellow lines together to connect 12V, the blue line to the switch letter (BLON) if it is an integrated board, generally in the back of the board, if you really can not find BLON can be connected to the 5V above the USB, the black line to ground.
2, red wire connected to the motherboard output between 12v-200v, yellow wire connected to 12v, blue wire connected to the switch signal (BLON), black wire ground. Note: input voltage 12v power supply, the light bar voltage can not exceed 100v, if the 24v power supply, the light bar voltage can not exceed 200v, try not to overload the use, so as not to be durable, thank you. Output voltage is automatically adjusted according to the required voltage of the light bar, that is to say, your light bar needs how much v booster plate will rise to how much v to the light bar. Output positive red line to the light bar's positive output of the negative terminal. On the negative side of the light bar.
3, if there are several groups of light bars can be combined together, the above connection is correct, you can rest assured that the power on the machine. If the power is found dark image can be adjusted according to the j1/j2/j3/j4/j5 of the booster board, the j1 solder joints shorted to increase the brightness. Short j2 and will increase. And so on, adjust to the appropriate brightness can be.
Product list:
1X driver board
2X Cable
1X driver board
2X Cable
- We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
- Payment must be received in 5 business days of auction closing.
- Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
- Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Fill your shipping info
- All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
- If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
- If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.