SPECIFICATIONS:
RF Frequency Range: 520-545 Mhz
Channel: 36
Headphone Output: 3.5mm jack socket
Transmitter Power Supply: DC 9-12V/300mA
Receiver Operating Time: up to 12 hours,2 x1.5V AA please use alkaline
battery or rechargeable Ni-MH battery, AA lithium battery is not recommended.
Using AA lithium batteries can cause interference)
( . Operating Range: 50m indoors and over 100m outdoors(environment dependent)
RF Output Power: 10mW
Signal-to-noise Ratio: 80db(A)
Modulation Mode : FM stereo
Frequency Response: 20Hz~18KHz
RF Frequency Range: 520-545 Mhz
Channel: 36
Headphone Output: 3.5mm jack socket
Transmitter Power Supply: DC 9-12V/300mA
Receiver Operating Time: up to 12 hours,2 x1.5V AA please use alkaline
battery or rechargeable Ni-MH battery, AA lithium battery is not recommended.
Using AA lithium batteries can cause interference)
( . Operating Range: 50m indoors and over 100m outdoors(environment dependent)
RF Output Power: 10mW
Signal-to-noise Ratio: 80db(A)
Modulation Mode : FM stereo
Frequency Response: 20Hz~18KHz
System:
ANLEON S2 is an IEM system designed for stage performance and broadcasting. High S/N ratio and dynamic range ensures optimal audio quality. The dual XLR inputs allow 2-channel, mono or stereo operation with a convenient mix function which allows you to run two sources into the S2.
Intended for drummers/keyboardist/guitar player/vocalist and other performers, the unit features a high-power headphone output that helps to ensure that as the band gets louder, you'll still be able to hear your performance.
S2T UHF Stereo Transmitter:
Volume Control: Adjustment of the volume for both output channels.
Stereo/Mono switch: Stereo mode (the device outputs the signal fed into the left input to the left headphone and the right signal to the right headphone). Mono mode (Channel L and channel R are mixed and output to both headphones.)
Power Switch: Switches the unit on and off.
XLR INPUTS (L) and (R): Dual XLR balanced jacks connect to the input signal source.
9V DC socket: Please use the included 9V 300mA adapter
S2R UHF Stereo Receiver:
1, LCD screen: Displays frequency, channel and battery level.
2, Antenna: Receives RF signal from the transmitter.
3, Power indicator: Green indicates functioning battery.
4, Earphone socket
5, Power and volume knob
6, Frequency adjustment button
7, Battery compartment
ANLEON S2 is an IEM system designed for stage performance and broadcasting. High S/N ratio and dynamic range ensures optimal audio quality. The dual XLR inputs allow 2-channel, mono or stereo operation with a convenient mix function which allows you to run two sources into the S2.
Intended for drummers/keyboardist/guitar player/vocalist and other performers, the unit features a high-power headphone output that helps to ensure that as the band gets louder, you'll still be able to hear your performance.
S2T UHF Stereo Transmitter:
Volume Control: Adjustment of the volume for both output channels.
Stereo/Mono switch: Stereo mode (the device outputs the signal fed into the left input to the left headphone and the right signal to the right headphone). Mono mode (Channel L and channel R are mixed and output to both headphones.)
Power Switch: Switches the unit on and off.
XLR INPUTS (L) and (R): Dual XLR balanced jacks connect to the input signal source.
9V DC socket: Please use the included 9V 300mA adapter
S2R UHF Stereo Receiver:
1, LCD screen: Displays frequency, channel and battery level.
2, Antenna: Receives RF signal from the transmitter.
3, Power indicator: Green indicates functioning battery.
4, Earphone socket
5, Power and volume knob
6, Frequency adjustment button
7, Battery compartment
