BOSTIK Simson PREP M NON-POROUS SURFACE SEALANT PRIMER 500ml. BOSTIK

Prep M ADHESION IMPROVER FOR NON-POROUS

ADVANTAGES

- Easy to use

- Fast drying

- One-step preparation

PRODUCT

Prep M is a pre-treatment for improvement of the adhesion of various adhesives and sealants on non-porous substrates.

APPLICATION

- Pre-treatment of metal substrates such as aluminium, steel, copper, brass.

- Pre-treatment of powder-coated metals.

- Pre-treatment of lacquered metals (test the substrate for adhesion and possible damage in advance).

- Pre-treatment of polyester (GRP), ABS and PVC.

PROPERTIES

- Fast drying; approximately 5 minutes.

- Easy to use: cleaner and pre-treatment in one.

- Efficient in use.

METHOD OF USE

Substrate must be dry, clean, dust-free and grease-free. Keep the packaging well closed until the moment of use. Open the tin and puncture the film. Do not use Prep M direct from the original packaging. Pour as much Prep M into a glass or tin as can be used within 30 minutes and close the tin again immediately. Prep M must not be applied in too thick a coat. Firmly rub the surface to be treated with a clean, fluff- and dye-free cloth or tissue paper, wetted with Prep M. In this way the surfaces will be cleaned and pre-treated in one operation. Replace the cloth or tissue when dirty. After a drying time of approximately 5 minutes (solvents must evaporate) the adhesive can be applied. Best results are obtained when the bonding is performed within six hours after application of Prep M. Therefore do not apply more Prep M than can be bonded within six hours Avoid contact with the pre-treated surface, as this may adversely affect adhesion.