Product features:
1. High efficiency mini volume, high power fast charging module
2. Small size, high power, 2 kinds of input port selection, default DC5521 input interface, optional XT30 input port
3.4 specifications to choose from, fast charging module without XT30 interface, fast charging module with XT30 interface, with shell, without shell
4. Full protocol, good compatibility, low ripple power, sufficient materials
5.65W full protocol, support PD3.0 / PPS / QC2.0 / 3.0 / 4.0 AFC / FCP / SCP V00C1.0 / 2.0 DASH / WARP and other mainstream fast charging
1. High efficiency mini volume, high power fast charging module
2. Small size, high power, 2 kinds of input port selection, default DC5521 input interface, optional XT30 input port
3.4 specifications to choose from, fast charging module without XT30 interface, fast charging module with XT30 interface, with shell, without shell
4. Full protocol, good compatibility, low ripple power, sufficient materials
5.65W full protocol, support PD3.0 / PPS / QC2.0 / 3.0 / 4.0 AFC / FCP / SCP V00C1.0 / 2.0 DASH / WARP and other mainstream fast charging
Description:
Product design, materials, PCB technology to make full efforts, so that the module can be in a very small volume to do the above very considerable parameters and functions. Module volume is relatively small, limited heat dissipation area, high-power output heat is normal, we use good materials, do not worry about the heat affects the life.
This product is applicable to the mainstream brand fast charging, the maximum support 65W. support Huawei OPPO and other super fast charging, in addition to the VIVO series of some models can not fast charging, all brands support are good, such as the OPPO system (- plus, true my phone) support high-power super fast charging, support Huawei super fast charging (need to use the original line). Charging power is much faster than the old scheme such as 3518. Support all versions of Apple's fast charging. As QC4.0 standard requires the use of Type-c port, so Xiaomi and other phones supporting QC4.0 protocol is recommended to use Type-C port charging can obtain higher charging power.
Product design, materials, PCB technology to make full efforts, so that the module can be in a very small volume to do the above very considerable parameters and functions. Module volume is relatively small, limited heat dissipation area, high-power output heat is normal, we use good materials, do not worry about the heat affects the life.
This product is applicable to the mainstream brand fast charging, the maximum support 65W. support Huawei OPPO and other super fast charging, in addition to the VIVO series of some models can not fast charging, all brands support are good, such as the OPPO system (- plus, true my phone) support high-power super fast charging, support Huawei super fast charging (need to use the original line). Charging power is much faster than the old scheme such as 3518. Support all versions of Apple's fast charging. As QC4.0 standard requires the use of Type-c port, so Xiaomi and other phones supporting QC4.0 protocol is recommended to use Type-C port charging can obtain higher charging power.
Product parameters:
Input: DC 9V-35V
2 kinds of input port: DC5521 input interface, XT30 input port
Maximum output power: 65W
Conversion efficiency: up to 93%
Temperature: -40° C to +85C
Charging port: Type-C + USB
Output short circuit protection
High current USB output interface
Support BC1.2 charging protocol
Support APPLE 5V/2.4A
Support PD2.0/3.0/PPS
Support QC2.0/3.0/4.0 etc.
Support FCP, SCP, HSCPV00C/DASH/WARP
Support SuperV00C2.0
Support multiple direct punch protocols
Size: 44.9MM*25.8MM, board thickness 11.5MM, four screw aperture diameter 2.0MM
Input: DC 9V-35V
2 kinds of input port: DC5521 input interface, XT30 input port
Maximum output power: 65W
Conversion efficiency: up to 93%
Temperature: -40° C to +85C
Charging port: Type-C + USB
Output short circuit protection
High current USB output interface
Support BC1.2 charging protocol
Support APPLE 5V/2.4A
Support PD2.0/3.0/PPS
Support QC2.0/3.0/4.0 etc.
Support FCP, SCP, HSCPV00C/DASH/WARP
Support SuperV00C2.0
Support multiple direct punch protocols
Size: 44.9MM*25.8MM, board thickness 11.5MM, four screw aperture diameter 2.0MM
Module input interface:
DC5521 interface input:Input DC 9V-35V, internal positive and external negative.
Mark +: optional welding input positive, or XT30 interface positive.
Mark -:Optional solder input negative, or XT30 interface negative.
DC5521 interface input:Input DC 9V-35V, internal positive and external negative.
Mark +: optional welding input positive, or XT30 interface positive.
Mark -:Optional solder input negative, or XT30 interface negative.
Product List: (Optional)
1* Module (without/with housing, without/with XT30 interface)
1* Module (without/with housing, without/with XT30 interface)
Notes on use:
◆ Product input should be greater than the output voltage, can maintain more than 1V differential pressure is best, such as to output 12V, it is recommended that the input to 13V or more, the input can not be connected to the reverse, connected to the reverse burn board.
◆ If you need to weld, the wiring is best to disconnect the power supply, powered welding will have a certain risk of hitting the chip, breaking through the chip.
◆Wiring can not be too thin, to ensure that the wire can withstand the corresponding current.
◆Many fast charging requires the original line, otherwise it will lead to not fast charging, or slow charging.
◆The more power the module uses, the closer the current is to the maximum current. The more heat will be generated, so pay attention to heat dissipation when using it.
The actual charging power of the phone and the phone protocol, and the phone battery life are related to the actual prevailing, the module output maximum voltage 12V, maximum current 4A, charging power and voltage is also very relevant, different protocols, charging voltage is not the same, this is the phone decision, the module is not the right to decide, the module is a passive response to the phone charging instructions. A small number of phones are not open to third-party fast charging, the phone may block third-party fast charging after the upgrade. This is a normal phenomenon.
◆If the phone is a direct charge protocol, the phone power is low when the start of high-power direct charge, to a certain level of power, the current will be reduced with the increase in power, is a normal phenomenon, this is not that the module to reduce your current, the module is no way to detect the phone's power, this is the phone comes with charging management chip control, mainly to ensure safety and extend battery life.
◆ When using problems, contact customer service must cooperate with customer service to provide wiring pictures, use video, etc., do not accept only provide text information.
◆ Product input should be greater than the output voltage, can maintain more than 1V differential pressure is best, such as to output 12V, it is recommended that the input to 13V or more, the input can not be connected to the reverse, connected to the reverse burn board.
◆ If you need to weld, the wiring is best to disconnect the power supply, powered welding will have a certain risk of hitting the chip, breaking through the chip.
◆Wiring can not be too thin, to ensure that the wire can withstand the corresponding current.
◆Many fast charging requires the original line, otherwise it will lead to not fast charging, or slow charging.
◆The more power the module uses, the closer the current is to the maximum current. The more heat will be generated, so pay attention to heat dissipation when using it.
The actual charging power of the phone and the phone protocol, and the phone battery life are related to the actual prevailing, the module output maximum voltage 12V, maximum current 4A, charging power and voltage is also very relevant, different protocols, charging voltage is not the same, this is the phone decision, the module is not the right to decide, the module is a passive response to the phone charging instructions. A small number of phones are not open to third-party fast charging, the phone may block third-party fast charging after the upgrade. This is a normal phenomenon.
◆If the phone is a direct charge protocol, the phone power is low when the start of high-power direct charge, to a certain level of power, the current will be reduced with the increase in power, is a normal phenomenon, this is not that the module to reduce your current, the module is no way to detect the phone's power, this is the phone comes with charging management chip control, mainly to ensure safety and extend battery life.
◆ When using problems, contact customer service must cooperate with customer service to provide wiring pictures, use video, etc., do not accept only provide text information.
- We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
- Payment must be received in 5 business days of auction closing.
- Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
- Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Fill your shipping info
- All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
- If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
- If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.