Type: Pipe Fittings
Material: Brass
Thread specifications: 1/2"(app. 20mm)
Thread type: BSP
Standard: Metric system (specifically as shown in the table below)
Features: sturdy and durable, wear-resistant, pressure-proof and explosion-proof, corrosion-resistant, long service life
Suitable for: gas, coal gas, water, oil and other media
Size description: F = Female = Internal thread, M = Male = Outer thread
Note: There are tolerances in product dimensions
Note during installation: When installing, wrap raw material tape or gasket on the thread to seal the threaded connection.
THREAD DATA (Metric unit) | |||
Thread Size | Nominal | Outside Thread Diameter (≈) | Internal Thread Diameter (≈) |
1/8” | DN6 | 9.5 mm | 8.8 mm |
1/4” | DN8 | 12.7 mm | 11.7 mm |
3/8” | DN10 | 16.5 mm | 15.5 mm |
1/2" | DN15 | 20 mm | 19.6 mm |
3/4” | DN20 | 25 mm | 24.2 mm |
1" | DN25 | 32 mm | 30.5 mm |
1-1/4" | DN32 | 41 mm | 39.5 mm |
1-1/2" | DN40 | 47 mm | 46 mm |
2" | DN50 | 59 mm | 57 mm |
2-1/2" | DN65 | 75 mm | 71 mm |
3" | DN80 | 88 mm | 84 mm |
4" | DN100 | 113 mm | 109 mm |
5" | DN125 | 140 mm | 136 mm |
6" | DN150 | 160 mm | 155 mm |
Note:The diameter data in the table is an average value and is for reference only. The actual measurement shall prevail. |
Package include:
According to your choice!