M8 Wire Rope Fixed Clamps + 12 PCS Triangular Chicken Heart Ring 12PCS
24PCS M8 Wire Rope Fixed Clamps with Triangular Ring Fitment:
Features:
High-quality
materials, sturdy and durable, anti-rust and anti-corrosion, smooth and
burr-free, solid structure, strong bearing capacity, not easy to
deform.
Specification text is printed on the bottom of the chuck for
easy identification, and the non-slip thread design on the surface of
the card slot effectively increases friction and prevents the wire rope
from slipping.
Product introduction:
Wire rope chucks are also called wire rope buckles:
(1) It is mainly used for the temporary connection of the steel wire
rope and the fixing of the hand rope behind the end of the steel wire
rope passing through the crane rail, as well as the fixing function of
the wind rope rope end on the ship's mast. Among them, it is applicable
to include: phosphating coated steel wire rope, galvanized steel wire
rope, stainless steel wire rope and smooth steel wire rope. It is a wide
wire rope fixture used in hoisting operations and a fixture that
assists in the role of steel wire rope hoisting.
(2) The chicken
heart ring has a rope groove for the end of the rope to be wrapped
around to prevent excessive bending and wear of the rope, protect the
safety of the wire rope, and reduce the risk.
(3) The wire rope
clamp and the heart ring are complementary and can be used alone or at
the same time. When used at the same time, it can increase the
protection of the wire rope and effectively reduce the wear.
Description:
1. Product material: stainless steel 304
2. Product attributes: wire rope chuck is also called wire rope buckle, wire rope sling loop is also called heart ring
3. Production process: casting, bending
4. Surface treatment: polishing
5. Interface type: U-shaped wire rope clamp, heart ring ring, with rope groove
Specification introduction:
M8 wire rope clamp: rod inner diameter 10.4MM, thread diameter 5.62MM, suitable for wire rope 8mm;
M8 heart ring: rope groove 9MM, total external length 49MM, suitable for wire rope 8mm;
of application: ships, docks, ports, industrial machinery, home
outdoor, electrical equipment, marine and land transportation, forestry
machinery, etc.
Package Included：
M8 wire rope clamp*12pcs
M8 Chicken Heart Ring*12pcs
Precautions for installation:
Wire chuck:
(1) When using a wire rope chuck, it is necessary to select a chuck suitable for the thickness of the wire rope.
(2) When using the wire rope buckle, tighten the U-shaped bolt until
the wire rope is flattened by about 1/3-1/4. Since the wire rope is
deformed after being stressed, the rope must be tightened a second time
after the wire rope is stressed to ensure the firmness of the joint
(3) When selecting the chuck, the size of the clip should be suitable
for the thickness of the wire rope. The inner net distance of the
U-shaped ring is 1～3mm larger than the diameter of the wire rope. If the
net distance is too large, it is not easy to clamp the rope, which is
prone to accidents.
(4) The chucks should be arranged in a row,
the U-shaped part is in contact with the rope head, and must not be in
contact with the main rope. If the U-shaped part is in contact with the
main rope, the main rope is easily flattened when stressed.
(5).
In order to check the reliability of the joint and find out whether the
wire rope slips off, install another chuck about 500 mm behind the last
chuck, release the rope end for a safe bend and then clamp it with the
main rope , In this way, if the clip has a sliding phenomenon, the
safety bend will be straightened, which is convenient for discovery and
timely reinforcement at any time to avoid accidents.
Sweetheart ring:
(1) The shackle should be smooth and flat, and no defects such as cracks, sharp edges, overburning, etc. are allowed.
(2) It is strictly forbidden to use cast iron or cast steel shackles.
The buckle body can be forged with killed steel, and the shaft pin can
be machined after forging from bar material.
(3) The shackle
should not be drilled or welded to repair. After the buckle body and the
shaft pin are deformed, no repair is allowed.
(4) The buckle body
and bolt should be checked during use, and no serious wear, deformation
and fatigue cracks should be allowed.
(5) When using, the lateral spacing must not be subject to tension, and the shaft pin must be inserted with a safety pin.
(6) After the shaft pin is correctly assembled, the width of the buckle
body must not be significantly reduced, and the threaded connection is
good.
