eBay

Update. 22.May: No delays - Orders are dispatched on time or sooner

WHAT IS INCLUDED?

=> Quality 170 degrees HD reverse “fish eye “ camera with parking lines, 6 layer Sony lenses, ip68 water proof standard. Highest possible resolution for PCCM+.

=> Camera holder with LED 6.000K license plate lamp that fits your car 100% OR new license plate glass w. camera holder for your OEM lamp to keep your car as original as possible.

=> Car Specific Wire harness with controller and independant power supply, electrical fuse that enables a safe and code free installation. The wire harness will protect your PCCM+ from electrical overload and shortenings. The KIT has OEM plug and pin connectors, this is not offered by anyone else.

=> 19 feet video cinch cable with OEM connectors for PCCM+ (PlugNPlay).

=> Installation notes printed.

=> Each KIT is tested in lab and works 100%.

=> Safe package sent by air mail, customs declaration.

=> Support and tips, if you have questions.... I will do my best to help you asap.

Accreditations: The KIT has been installed in many cars in both the US, North America Europe and even in Japan. In many cases owners have installed themselves or the task has been completed by professionals. In some cases installations have even been done by official Porsche Service Centers.

DESCRIPTION:

Reverse camera install custom kit for Porsche PCCM+ 987/997 and Cayenne 1. Generation cars. 170° "fisheye" HD REVERSE CAMERA with Sony wide-angle 6 level lens optics, superb rear camera with very detailed picture, (virtually see around "corners"), full FULL HD, shows dynamic parking lines, ip68 waterproof, incl. glass holder (see picture 3)which replaces left side license plate lamp. if you want to retain old fashioned original license plate lamp, make a note in the order process or mail me, then I supply cam holder glass for the old fashioned OEM type (need to be waterproofed with a little silicone around edges - not included).Wire harness with control module which controls camera (on/off) on your screen, approx 5 meter (19 feet) video cable, OEM FAKRA adapter and original extra pin for 6-pin connector for port C on back of the PCCM+ unit. This is Easy installation, cables are prepared and 100%!tested. This kit gives you highest possible picture resolution on your PCCM+ screen. The kit is SAFE for your PCCM Plus unit and will not shortend nor cause burned circuits or electrical fires. All parts are purchased high grade, camera is sony 6 layer lens, design and production is custom made by engineer (this cannot be purchased anywhere as complete package, this is as close to KIT as possible)'.

PLEASE NOTE:

=> Pictures are for illustration only, actual product is custom made to match your car !!

=> Inform year and model of your Porsche upon ordering the kit.

=> If your car has OEM license plate lights, and you want to retain them both, please let me know when buying. I will then send a special cam holder for OEM lamps. If you do not ask for OEM type cam holder, I will send the LED type (see pictures ).

A Note on LED Lamps:

The pictures of the Camera and license plate lamps shows my car. I have the LED camera version (LEFT side) and as you can see,the color temp and brightness of the camera light is a good fit for the VW /Audi lamp I have upgraded my right side lamp to. If you are interested, the VW part number for right side LED lamp is: 1K8 948 021D. (You only need 1 pcs). You can also get many other 6.000K LED lamps on the internet , VW parts have the same length and connector!!

DISCLAIMER:

This "KIT" custom prepared for your car. Kit is prepared as much as possible from the shop and is as close to PlugNPlay as possible. -Product for your car might look slighty different than pictured in the examples (small variations for different models)
We are integrating with parts in your base car and the PCCM+ kit from Porsche for classics 987/997 (the complete PCCM+ kit must be preinstalled in your car and operational).
The car interface points are mostly plugNplay and its made easy for You: 2 wires plug directly into PCCM+, 1 wire go to a ground / chassis, only 2 wires must tap into car wires in your car. For this you need to solder or use an electric clip (not included) .
I will help You if you have questions or run into difficulties!!

Some experience with car electrical wiring must be expected. With that basic skill, it is not that hard to install the KIT and remember, this KIT is NOT yet available for the PCCM+ upgrade and Porsche cannot help You. If Porsche offered this, it would cost allot of money and require shop time including coding of the car. Ask your Porsche professional to help you out if you don’t have the experience!!

Our solution does NOT REQUIRE coding of Your Porsche and it is SAFE, testet and installed in many different 987,997 and Cayenne cars, Install notes included, We will make it work - remenber: actual product for your car can differ from pictures as There are different configurations for different models.

KITS are custom made and not returnable .
The KIT requires you have pre-installed the complete 987/997/Cayenne pccm+ radio upgrade in your classic Porsche.

We do this out of passion for Porsches, not for profit ! Allot of time has gone into testing and finding the best solution and components for the KIT.

Thank you for your support

and

Enjoy SAFE Driving with Your new reverse cam,

T.Frank