Cure 2mm reins in one second

Light intensity up to 2800mw/cm2

Constant power output, born for restoration

360 degree rotatable head, extend the possibility

1 sec for curing, Go quicker than ever

Ergonomics design, optimize the hand-grip use

 

Operation and function description:

One button design , more easier , more elegant !

 

1. There are 3 working modes.

Mode 1 : green light on , working time 1S .

Mode 2 : purple light on , working time 5S .

Mode 3 : the green light and purple light on at the same time , working time 10S .

 

2. Choose modes : press button for each 2 second to choose different mode .

 

1:  Press button for the first 2 seond , with a viberation , the green light on , machine entred Mode 1 , then release hand and click one time , then it starts to work !

2: Press another 2 seond , with a viberation , the purple light on , machine entred Mode 2 , then release hand and click one time , then it starts to work !

3: Press the third 2 second , with a viberation , the green light and purple light on at the same time , machine entred Mode 3 ,  then release hand and click one time , then it starts to work !

 

Package Contents:

1 × host handle;

1 × charging base;

1 × power adapter;

1 × user manual.

Package including : 1 Set ( Radom color)

*****************************************************************************************************************************************************************                                                   

 

1.INTRODUCTION

This product is used in fast solidification by lighting dental resin. It is a new generation of standard developed LED curing light, with humanity intelligent chip, the world advanced high intensity LED light and Li-on rechargeable battery. It can cure all the dental resin in the market nowadays,
 

2.PACKING LIST

Main Body: 1Pc             Light Source:: 1Pc
Charge Base: 1Pc          Adapter: 1Pc

USB cable: 1Pc               Light Protect: 1Pc
Lens: 5pcs                     Test block:2pcs
 

3.TECHNICALPARAMETERS
3.1 Main Unit

 

 

Battery Voltage	DC3.7V
Battery Capacity	1500mAh
Wave Length	385～515nm
Light Density	P1(9W) ≥ 2300mmw/cm² P2（5W）≥1200mw/cm²
Charging time	3 hours approx
Weight	550g
Packing size	L205 x W109 x H77mm

 

3.2AC Adapter

Rated input voltage	AC100-240V 50/60Hz
Output voltage	DC 5V/MICRO USB
Output current	1A

 

3.3 Operation Conditions
 

Environment temperature	+5 ℃ ~+40 ℃
Relative humidity	10%~80%RH
Atmospheric pressure	50~106KPa

4.Use Method
4.1 Charge

Put the curing light into the charger base, the blue light is shining one by one. When it is done, all of the blue lights are on.It takes about 3hours. Take care not to charge more than 7hours. Remove the adapter from the power supply after charging.

Note: Can charge with the main unit socket also. When charging, theLED screen show CH; when done, the LED show FU

4.2 Operation Instruction

4.2.1Press M orTbutton to power on.Ifpress ON/OFF button, will light the Light source.
4.2.2 Set up Mode:

P1(9W,≥2300mw/cm²)  The actual measured value 2800mw/cm²

P2（5W，≥1200mw/cm²）
 

4.2.3 Setup Time:P1--1/3/5s

                        P2--6/10/15/20s

4.2.4Press ON/OFF button to light on the LED curing light. Ifsome wrong happened, the LED screen shows Er.

4.2.5 The main unit will power off by itselfif without any operation about 2minuts.
 

Caution: the curing light can not be pointed at the patient's eyes while it is operating. If any accidents happen, go to the hospital immediately
 

5.Precautions

5.1 This machine is precise opticalequipment,it should use in the clean and dry place.

5.2 Remove adapter from the power supply after charge. 5.3 Do not touch the battery electrodes by any metal objects.

6.Cleaning & Sterilization

6.1 Clean

Wipe the main unit with neutral detergent if needed.

6.2 Sterilization

6.2.1 The light source can be high pressure autoclaved. Autoclave it after each use with seal bag.
6.2.2Don't autoclave any parts(the main unit and charging base)other than those that can be subjected to autoclave sterilization.

6.2.3 Autoclave up to a max.135℃. It's recommended to autoclave for 20min at 121℃ or 15 min at 132℃.

Notice: Don't use any solvent such as benzine and thinner for sterilization.

7.Transportation And Storage

1)Lay lightly during transportation, avoid strong shake 2) Storage condition:

a. Ambiance temperature:-10~～40℃b.Relative humidity:≤85%

8.Disposing product

Please consult with dealer from whom you purchased it about waster despoil.

9.Warranty

Manufacturer warrants its products to the original purchaser against defects in material and workmanship under normal practices of installation, use and servicing. This unit is guaranteed for its designated use against original defects in materials and workmanship for a period of 12 months from date of purchasing.

 

**********************************************************************************************************************************************************************************************************************

 

Model: LED.B
Made by Woodpecker (100%  Original guaranteed)
FDA/CE 0197 approved
Convenient for operation
Small size, Wireless and light  weighted.
Light Source: Blue light.
Wave Length: 420nm-480nm.
Power input: AC 100V-240v  50Hz/60Hz
Light Output: 1000-1200mW/cm².
Connection Mode: Charged  battery.
Battery: rechargeable Li-on  battery, 2000mAh.
The recharge input voltage is  100V-240V, which is suitable for  all country
Dimension: 31mm×34mm×260mm.
Net Weight: 145g
One year's repair free of charge  and lifetime maintenance
We can offer free plug to fit  your country if necessary

Specifications:

1. Four modes of working time:  5,10,15,20 seconds.
2. Lithium rechargeable battery,  2000mAh.
3. If using 10 seconds per time,  you can use more than 430 times  for each full charge.Low standby  power consumption with seventy  day's standby time. Constant  light intensity,The  solidification effect is stable  even the battery power  decreases.
4. The optical fiber is  autoclavable under the high  temperature of 135 C and the  pressure of 0.22Mpa.
5. The light source adopts  original American LED.
6. Can be used with UDS-M  (BSC-US16) Ultrasonic scaler

Package:

1 X Curing light
1 X High capacitance  rechargeable battery
1 X Charger
1 X Charger socket
1 X plug (if necessary)

 

*************************************************************************************************************************************************************************************************

 

 

FDA Statement：
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatry agencies.
If so, you can bid on this item only if you are an authorized purchaser.
If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. 

Feedback

Shipping

1.We will send out your orders in one day as soon as we receive your payment. 2. Delivery ways : TNT,DHL,YANWEN,EMS,USPS,CHINA POST,etc. 3. Delivery time : The good you ordered will be posted out in the second day after the payment has been made .We will inform you via email if any delay occurs due to holiday events .General shipping time is between 7-12 working days .After the shipping started , the order will be monitored and the tracking number of the item will be posted on paypal or ebay . Destination Delivery Time Working Days 7-10 10-15 15-25 25-40 >50 US Item arrived 80% 10% 8% 1% -- ASIA Item arrived 30% 40% 20% 10% -- EU Item arrived 20% 20% 50% 10% -- AU Item arrived 30% 30% 20% 20% -- Other Countries Item arrived 5% 10% 10% 60% --

Returns

If the item you received is damaged or defective,Please contact us immidately.We will free exchange or refund. We will pay the return shipping costs if the product is defective or the return is a result of our error. If the item is returned for any other reason you are responsible for the return shipping charges. You can return your purchase for up to 15 days from the date of delivery. No refund will be issued if the product shows signs of use. Returned package must be in the original packaging, everything must be in new condition, No missing parts. Our guarantee does not cover accidental damage or wear of product caused by customer.Thank you very much for your understanding!

Contact Us

We will reply all messages within 24 business hours and we are able to give you a quick response during the duty time. If we are off duty, please kindly be patient and give us a little more time, not just leave the neutral or negative feedback without communication. Every problem will be solved ASAP if you contact us! Our working time Monday To Friday: 8:30 am --- 12:00 am 1:30 pm --- 5:30 pm (Please Refer to Beijing Time.)