DMXDENT iLED II
NOTE : Random Color
Cure 2mm reins in one second
Light intensity up to 2800mw/cm2
Constant power output, born for restoration
360 degree rotatable head, extend the possibility
1 sec for curing, Go quicker than ever
Ergonomics design, optimize the hand-grip use
Operation and function description:
One button design , more easier , more elegant !
1. There are 3 working modes.
Mode 1 : green light on , working time 1S .
Mode 2 : purple light on , working time 5S .
Mode 3 : the green light and purple light on at the same time , working time 10S .
2. Choose modes : press button for each 2 second to choose different mode .
1: Press button for the first 2 seond , with a viberation , the green light on , machine entred Mode 1 , then release hand and click one time , then it starts to work !
2: Press another 2 seond , with a viberation , the purple light on , machine entred Mode 2 , then release hand and click one time , then it starts to work !
3: Press the third 2 second , with a viberation , the green light and purple light on at the same time , machine entred Mode 3 , then release hand and click one time , then it starts to work !
Package Contents:
1 × host handle;
1 × charging base;
1 × power adapter;
1 × user manual.
Package including : 1 Set ( Radom color)
*****************************************************************************************************************************************************************
1.INTRODUCTION
This product is used in fast solidification by lighting dental resin. It is a new generation of standard developed LED curing light, with humanity intelligent chip, the world advanced high intensity LED light and Li-on rechargeable battery. It can cure all the dental resin in the market nowadays,
2.PACKING LIST
Main Body: 1Pc Light Source:: 1Pc
Charge Base: 1Pc Adapter: 1Pc
USB cable: 1Pc Light Protect: 1Pc
Lens: 5pcs Test block:2pcs
3.TECHNICALPARAMETERS
3.1 Main Unit
Battery Voltage
|
DC3.7V
|
Battery Capacity
|
1500mAh
|
Wave Length
|
385~515nm
|
Light Density
|
P1(9W) ≥ 2300mmw/cm² P2(5W)≥1200mw/cm²
|
Charging time
|
3 hours approx
|
Weight
|
550g
|
Packing size
|
L205 x W109 x H77mm
|
3.2AC Adapter
Rated input voltage
|
AC100-240V 50/60Hz
|
Output voltage
|
DC 5V/MICRO USB
|
Output current
|
1A
|
3.3 Operation Conditions
Environment temperature
|
+5 ℃ ~+40 ℃
|
Relative humidity
|
10%~80%RH
|
Atmospheric pressure
|
50~106KPa
|
4.Use Method
4.1 Charge
Put the curing light into the charger base, the blue light is shining one by one. When it is done, all of the blue lights are on.It takes about 3hours. Take care not to charge more than 7hours. Remove the adapter from the power supply after charging.
Note: Can charge with the main unit socket also. When charging, theLED screen show CH; when done, the LED show FU
4.2 Operation Instruction
4.2.1Press M orTbutton to power on.Ifpress ON/OFF button, will light the Light source.
4.2.2 Set up Mode:
P1(9W,≥2300mw/cm²) The actual measured value 2800mw/cm²
P2(5W,≥1200mw/cm²)
4.2.3 Setup Time:P1--1/3/5s
P2--6/10/15/20s
4.2.4Press ON/OFF button to light on the LED curing light. Ifsome wrong happened, the LED screen shows Er.
4.2.5 The main unit will power off by itselfif without any operation about 2minuts.
Caution: the curing light can not be pointed at the patient's eyes while it is operating. If any accidents happen, go to the hospital immediately
5.Precautions
5.1 This machine is precise opticalequipment,it should use in the clean and dry place.
5.2 Remove adapter from the power supply after charge. 5.3 Do not touch the battery electrodes by any metal objects.
6.Cleaning & Sterilization
6.1 Clean
Wipe the main unit with neutral detergent if needed.
6.2 Sterilization
6.2.1 The light source can be high pressure autoclaved. Autoclave it after each use with seal bag.
6.2.2Don't autoclave any parts(the main unit and charging base)other than those that can be subjected to autoclave sterilization.
6.2.3 Autoclave up to a max.135℃. It's recommended to autoclave for 20min at 121℃ or 15 min at 132℃.
Notice: Don't use any solvent such as benzine and thinner for sterilization.
7.Transportation And Storage
1)Lay lightly during transportation, avoid strong shake 2) Storage condition:
a. Ambiance temperature:-10~~40℃b.Relative humidity:≤85%
8.Disposing product
Please consult with dealer from whom you purchased it about waster despoil.
9.Warranty
Manufacturer warrants its products to the original purchaser against defects in material and workmanship under normal practices of installation, use and servicing. This unit is guaranteed for its designated use against original defects in materials and workmanship for a period of 12 months from date of purchasing.
**********************************************************************************************************************************************************************************************************************
Model: LED.B
Made by Woodpecker (100% Original guaranteed)
FDA/CE 0197 approved
Convenient for operation
Small size, Wireless and light weighted.
Light Source: Blue light.
Wave Length: 420nm-480nm.
Power input: AC 100V-240v 50Hz/60Hz
Light Output: 1000-1200mW/cm².
Connection Mode: Charged battery.
Battery: rechargeable Li-on battery, 2000mAh.
The recharge input voltage is 100V-240V, which is suitable for all country
Dimension: 31mm×34mm×260mm.
Net Weight: 145g
One year's repair free of charge and lifetime maintenance
We can offer free plug to fit your country if necessary
Specifications:
1. Four modes of working time: 5,10,15,20 seconds.
2. Lithium rechargeable battery, 2000mAh.
3. If using 10 seconds per time, you can use more than 430 times for each full charge.Low standby power consumption with seventy day's standby time. Constant light intensity,The solidification effect is stable even the battery power decreases.
4. The optical fiber is autoclavable under the high temperature of 135 C and the pressure of 0.22Mpa.
5. The light source adopts original American LED.
6. Can be used with UDS-M (BSC-US16) Ultrasonic scaler
Package:
1 X Curing light
1 X High capacitance rechargeable battery
1 X Charger
1 X Charger socket
1 X plug (if necessary)
*************************************************************************************************************************************************************************************************
100% Woodpecker original
With English manual
Features
Wireless.
The battery can be replaced.
Three working modes: Full, Ramping, Pulse.
Time setting: 5s, 10s, 15s, 20s, 25s, 30s, 35s, 40s.
A full charge can be used for over 400 times. (10s/time)
Constant light intensity, the solidification effect is not affected by the consumption of remaining power.
With wire or wireless. It can run directly on commercial power supply whilst the battery runs out.
Technical Details:
Power input AC110V 50Hz/60Hz
Light output 850mW/cm² - 1000mW/cm²
Net weight 143g
Dimensions 264mm × 32mm × 37mm
Package:
1 X Curing light
1 X High capacitance rechargeable battery
1 X Charger
1* Curing light holder
FDA Statement:
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatry agencies.
If so, you can bid on this item only if you are an authorized purchaser.
If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.
Feedback |
|
|
Shipping |
1.We will send out your orders in one day as soon as we receive your payment.
2. Delivery ways : TNT,DHL,YANWEN,EMS,USPS,CHINA POST,etc.
3. Delivery time :
The good you ordered will be posted out in the second day after the payment has been made .We will inform you via email if any delay occurs due to holiday events .General shipping time is between 7-12 working days .After the shipping started , the order will be monitored and the tracking number of the item will be posted on paypal or ebay . |
Destination |
Delivery Time |
Working Days |
7-10 |
10-15 |
15-25 |
25-40 |
>50 |
US |
Item arrived |
80% |
10% |
8% |
1% |
-- |
ASIA |
Item arrived |
30% |
40% |
20% |
10% |
-- |
EU |
Item arrived |
20% |
20% |
50% |
10% |
-- |
AU |
Item arrived |
30% |
30% |
20% |
20% |
-- |
Other Countries |
Item arrived |
5% |
10% |
10% |
60% |
-- |
|
|
Returns |
If the item you received is damaged or defective,Please contact us immidately.We will free exchange or refund.
We will pay the return shipping costs if the product is defective or the return is a result of our error. If the item is returned for any other reason you are responsible for the return shipping charges.
You can return your purchase for up to 15 days from the date of delivery. No refund will be issued if the product shows signs of use. Returned package must be in the original packaging, everything must be in new condition, No missing parts.
Our guarantee does not cover accidental damage or wear of product caused by customer.Thank you very much for your understanding!
|
|
Contact Us |
We will reply all messages within 24 business hours and we are able to give you a quick response during the duty time. If we are off duty, please kindly be patient and give us a little more time, not just leave the neutral or negative feedback without communication. Every problem will be solved ASAP if you contact us!
Our working time Monday To Friday: 8:30 am --- 12:00 am 1:30 pm --- 5:30 pm (Please Refer to Beijing Time.)
|