This is a brand new pair of Tannoy Dual Concentric, CMS803DCPI ceiling speakers.  


These were opened as a dishonest buyer returned  - they are brand new or your money back


**YOU ARE PURCHASING 2 SPEAKERS**



-----------------------------------------------------



Product Information (from the manufacturer):



The CMS 803DC PI is a full bandwidth 360-Watt high sensitivity loudspeaker that utilizes our third generation Ceiling Monitor System technology (CMS 3.0). Thanks to an all-new proprietary 8" Dual Concentric point source driver with Omnimagnet technology on a Torus Ogive Waveguide, the UL certified CMS 803DC PI delivers wide and consistent broadband directivity with enhanced intelligibility - plus highly accurate and linear response.


Optimized for Installation


Specifically designed with a self-aligning 5-way clamp system for fast, simple and cost-effective installation, CMS 803DC PI also features extra clamp extension to accommodate thicker ceiling panels, and a locking design that prevents over-tightening. A low-insertion loss 60 W transformer with convenient front panel tap switching, paintable powder coated steel mesh grille with dust protection, two tile support rails, and one C-ring are all included. An Arco style grille, which conceals the entire unit for aesthetic purposes, a back can, and plaster (mud) ring are available separately.


LAB GRUPPEN Ready


The CMS 803DC PI is finished in semi-matte white and optimised for use with LAB GRUPPEN LUCIA amplifiers, which accommodate up to 8 CMS Series loudspeakers per channel.



SPECIFICATIONS:


Performance
Frequency Response (-3 dB)47 Hz - 30 kHz
Frequency Range (-10 dB)40 Hz - 35 kHz
System Sensitivity (1 W @ 1 m)92 dB (1 W = 4 V for 16 Ohms)
Nominal Coverage Angle90 degrees conical
Power HandlingAverage: 90 W
Program: 180 W
Peak: 360 W
Recommended Amplifier Power180 W @ 16 Ohms
Nominal Impedance (Lo, Z)16 Ohms
Rated Maximum SPLAverage: 112 dB
Peak: 118 dB
Average (with THP60): 110 dB
Transformer Taps (via Front Rotary Switch)70 V: 60 W (83 Ohms) / 30 W (165 Ohms) / 15 W (330 Ohms) / 7.5 W (660 Ohms) / OFF & low impedance operation
100 V: 60 W (165 Ohms) / 30 W (330 Ohms) / 15 W (660 Ohms) / OFF & low impedance operation
Transducers
Dual Concentric Point Source Driver1 x 8.0" (200 mm) Dual Concentric driver, using Omnimagnet technology
Low Frequency1.75" (44 mm) voice coil, treated multi fiber paper pulp cone
High Frequency1.00" (25 mm) PEI dome
Physical
Safety FeaturesSafety ring located at rear of enclosure for load bearing safety bond
Clamping DesignSecurity toggle clamp. Min / Max clamping range 0.37" ( 9.5 mm ) / 2.36" ( 60 mm )
Recommended clamp torque: 1.5 Nm
Backcan OptionsSeparate backcan for pre-installation
Cable Entry OptionsCable clamp & squeeze connector for conduit up to 22 mm
ConnectorsRemovable locking connector with screw terminals with "loop through" facility
ComplianceUL-1480, UL-2043, CE
Dimensions
Bezel Diameter12.56" (319 mm)
Front of Ceiling to Rear of Speaker Unit4.94" (125.6 mm)
Front of Ceiling to Top of Safety Loop6.63" (168.5 mm)
Hole Cutout Diameter (all models)11.61" (295 mm)
Weight21.6 lbs (9.8 kg)
Shipping Weight29.76 lbs (13.5 kg)