Up for sale is a Adtran 2nd GEN TOTAL ACCESS 908e P/N:4242908L5 IP Business Gateway -TESTED/RESET. This item has been TESTED, POWERED ON, FACTORY RESET, and all ports and lights are shown to be FULLY FUNCTIONAL. This item is in GOOD physical CONDITION with minor scratches, scrapes, and scuffs from previous usage and storage.
This item ONLY comes with RACK EARS. This item DOES NOT come with a POWER CABLE. No other accessories are included. Please see listing pictures for more detail.
You get exactly what you see in the pictures. Please see the pictures for more details. The best descriptions are in the pictures. Please see the pictures for a better understanding of the item's condition.
We do our best to describe each item. If you have any questions, feel free to contact us prior to making a purchase. Please contact us if you have any issues with your purchase before leaving a review. We try our best to resolve all issues.
TA908e#show version
ADTRAN, Inc. OS version A4.11.00.E
Mainline Version: M04
Checksum: 80C94C40
Built on: Mon Jan 23 17:06:35 2012
Upgrade key: b0fa19c391c241879b13a8733beea5ae
Boot ROM version 14.05.00.SA
Checksum: F343
Built on: Thu Jun 21 13:58:08 2007
Copyright (c) 1999-2007, ADTRAN, Inc.
Platform: Total Access 908e (2nd Gen), part number 4242908L5
Serial number CFG1016415
Flash: 33554432 bytes DRAM: 134217727 bytes
TA908e uptime is 0 days, 0 hours, 6 minutes, 40 seconds
slot 0, DSP 1
DSP software version: G2.A4.07.04
DSP hardware version: Freescale MSC7119
Total channels: 30
System returned to ROM by Warm Start
Current system image file is "NONVOL:/9242916-20A411.biz"
Boot system image file is "NONVOL:/9242916-20A411.biz"
Primary system configuration file is "startup-config"
TA908e#show system
ADTRAN, Inc. OS version A4.11.00.E
Checksum: 80C94C40, built on Mon Jan 23 17:06:35 2012
Boot ROM version 14.05.00.SA
Checksum: F343, built on: Thu Jun 21 13:58:08 2007
Copyright (c) 1999-2007, ADTRAN, Inc.
Platform: Total Access 908e (2nd Gen), part number 4242908L5
Serial number CFG1016415
Flash: 33554432 bytes DRAM: 134217727 bytes
TA908e uptime is 0 days, 0 hours, 6 minutes, 47 seconds
System returned to ROM by Warm Start
Current system image file is "NONVOL:/9242916-20A411.biz"
Boot system image file is "NONVOL:/9242916-20A411.biz"
Power Source: AC
System primary clock source configuration: INTERNAL
System secondary clock source configuration: INTERNAL
System current active clock source: INTERNAL
T1 Framer Version: QuadFalc56 V3.1
TA908e#show auto-config
Auto-Config is disabled, current status: Idle.
TFTP Server is not set
Config filename is not set
Maximum retry count is 0 (repeat indefinitely), total retries is 0
TA908e#
TA908e#
TA908e#
TA908e#
TA908e#show auto-link
AutoLink: Disabled
Use Http: Disabled
Server URL:
Server SERVER:
Recontact Interval: 3600 seconds
Last Contact: Not Discovered
Next Contact:
Status: Not Discovered
TA908e#show buffers
Buffer handles: 335 of 4000 used.
Pool Size Total Used Available Max. Used
0 2100 3894 335 3559 351
1 2048 64 0 64 0
2 4096 32 0 32 0
3 8192 4 0 4 0
4 16384 2 0 2 0
5 32768 2 0 2 0
6 66560 2 0 2 0
TA908e#show event-history
LOG FILE
----------------------------
1970.01.01 00:00:45 FIREWALL id=firewall time="1970-01-01 00:00:45" fw=TA908e pri=5 type=2 msg="Access policy with Rule id: 1 has been Added" agent=Firewall
1970.01.01 00:00:45 FIREWALL id=firewall time="1970-01-01 00:00:45" fw=TA908e pri=5 type=2 msg="Access policy with Rule id: 2 has been Added" agent=Firewall
1970.01.01 00:00:45 CRYPTO_IPSEC VPN Fast Processing is already enabled..
1970.01.01 00:00:45 CRYPTO_PKI CMgrInit: LOADED SELF AND TRUSTED CERTS
1970.01.01 00:00:45 OPERATING_SYSTEM.0 Analog Services Initialized - Codec #1. 24004 ms
1970.01.01 00:00:45 OPERATING_SYSTEM.0 Analog Services Initialized - Codec #2. 24004 ms
1970.01.01 00:00:45 SYS_TIMING.0 Primary/secondary timing sources are down. Falling back to internal timing source. 24714 ms
2019.10.15 17:11:14 OPERATING_SYSTEM Warm Start
2019.10.15 17:11:15 INTERFACE_STATUS.fxs 0/1 changed state to up
2019.10.15 17:11:15 INTERFACE_STATUS.fxs 0/2 changed state to up
2019.10.15 17:11:15 INTERFACE_STATUS.fxs 0/3 changed state to up
2019.10.15 17:11:15 INTERFACE_STATUS.fxs 0/4 changed state to up
2019.10.15 17:11:15 INTERFACE_STATUS.fxs 0/5 changed state to up
2019.10.15 17:11:15 INTERFACE_STATUS.fxs 0/6 changed state to up
2019.10.15 17:11:15 INTERFACE_STATUS.fxs 0/7 changed state to up
2019.10.15 17:11:15 INTERFACE_STATUS.fxs 0/8 changed state to up
TA908e#show flash
11471009 9242916-20A411.biz
(dir) 1024 coeff
2261 startup-config
1375 startup-config.bak
11608755 bytes used, 20160300 available, 31769055 total
TA908e#show hosts
Name/address lookup uses domain name service
DNS Proxy is enabled
Default domain is not set
Name servers are 0.0.0.0
There are currently no hosts
TA908e#show interfaces
Displaying interfaces...
t1 0/1 is DOWN
Transmitter is sending remote alarm
Receiver has loss of signal, loss of frame
T1 coding is B8ZS, framing is ESF
FDL type is ANSI
Line build-out is 0dB
No remote loopbacks, No network loopbacks
Acceptance of remote loopback requests enabled
Tx Alarm Enable: rai
Last clearing of counters 00:10:19
loss of frame : 1, current duration 00:10:19
loss of signal : 1, current duration 00:10:19
AIS alarm : 0
Remote alarm : 0
DS0 Status: 123456789012345678901234
------------------------
Status Legend: '-' = DS0 is not allocated
'X' = DS0 is allocated (nailed)
Signaling Bit Status: 123456789012345678901234
RxA: ------------------------
RxB: ------------------------
TxA: ------------------------
TxB: ------------------------
123456789012345678901234
Line Status: -- LOS -- Red -- Tx Yellow --
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
Current Performance Statistics:
0 Errored Seconds, 0 Bursty Errored Seconds
0 Severely Errored Seconds, 358 Severely Errored Frame Seconds
358 Unavailable Seconds, 0 Path Code Violations
0 Line Code Violations, 0 Controlled Slip Seconds
0 Line Errored Seconds, 0 Degraded Minutes
t1 0/2 is administratively down
Receiver has no alarms
T1 coding is B8ZS, framing is ESF
FDL type is ANSI
Line build-out is 0dB
No remote loopbacks, No network loopbacks
Acceptance of remote loopback requests enabled
Tx Alarm Enable: rai
Last clearing of counters 00:10:19
loss of frame : 1, current duration 00:10:19
loss of signal : 1, current duration 00:10:19
AIS alarm : 0
Remote alarm : 0
DS0 Status: 123456789012345678901234
------------------------
Status Legend: '-' = DS0 is not allocated
'X' = DS0 is allocated (nailed)
Signaling Bit Status: 123456789012345678901234
RxA: ------------------------
RxB: ------------------------
TxA: ------------------------
TxB: ------------------------
123456789012345678901234
Line Status: -- No Alarms --
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
Current Performance Statistics:
0 Errored Seconds, 0 Bursty Errored Seconds
0 Severely Errored Seconds, 81 Severely Errored Frame Seconds
81 Unavailable Seconds, 0 Path Code Violations
0 Line Code Violations, 0 Controlled Slip Seconds
0 Line Errored Seconds, 0 Degraded Minutes
t1 0/3 is DOWN
Transmitter is sending remote alarm
Receiver has loss of signal, loss of frame
T1 coding is B8ZS, framing is ESF
FDL type is ANSI
Line build-out is 0dB
No remote loopbacks, No network loopbacks
Acceptance of remote loopback requests enabled
Tx Alarm Enable: rai
Last clearing of counters 00:10:19
loss of frame : 1, current duration 00:10:19
loss of signal : 1, current duration 00:10:19
AIS alarm : 0
Remote alarm : 0
DS0 Status: 123456789012345678901234
------------------------
Status Legend: '-' = DS0 is not allocated
'X' = DS0 is allocated (nailed)
Signaling Bit Status: 123456789012345678901234
RxA: ------------------------
RxB: ------------------------
TxA: ------------------------
TxB: ------------------------
123456789012345678901234
Line Status: -- LOS -- Red -- Tx Yellow --
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
Current Performance Statistics:
0 Errored Seconds, 0 Bursty Errored Seconds
0 Severely Errored Seconds, 358 Severely Errored Frame Seconds
358 Unavailable Seconds, 0 Path Code Violations
0 Line Code Violations, 0 Controlled Slip Seconds
0 Line Errored Seconds, 0 Degraded Minutes
t1 0/4 is DOWN
Transmitter is sending remote alarm
Receiver has loss of signal, loss of frame
T1 coding is B8ZS, framing is ESF
FDL type is ANSI
Line build-out is 0dB
No remote loopbacks, No network loopbacks
Acceptance of remote loopback requests enabled
Tx Alarm Enable: rai
Last clearing of counters 00:10:19
loss of frame : 1, current duration 00:10:19
loss of signal : 1, current duration 00:10:19
AIS alarm : 0
Remote alarm : 0
DS0 Status: 123456789012345678901234
------------------------
Status Legend: '-' = DS0 is not allocated
'X' = DS0 is allocated (nailed)
Signaling Bit Status: 123456789012345678901234
RxA: ------------------------
RxB: ------------------------
TxA: ------------------------
TxB: ------------------------
123456789012345678901234
Line Status: -- LOS -- Red -- Tx Yellow --
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
Current Performance Statistics:
0 Errored Seconds, 0 Bursty Errored Seconds
0 Severely Errored Seconds, 358 Severely Errored Frame Seconds
358 Unavailable Seconds, 0 Path Code Violations
0 Line Code Violations, 0 Controlled Slip Seconds
0 Line Errored Seconds, 0 Degraded Minutes
eth 0/1 is DOWN, line protocol is DOWN
Hardware address is 00:A0:C8:8B:28:67
Ip address is 10.10.10.1, netmask is 255.255.255.0
MTU is 1500 bytes, BW is 0 Kbit
?b/s, negotiated ? duplex, configured full-duplex
ARP type: ARPA; ARP timeout is 20 minutes
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
Queueing method: fifo
Output queue: 0/256/0 (size/max total/drops)
Interface Shaper: NOT ENABLED
0 packets input, 0 bytes
0 unicasts, 0 broadcasts, 0 multicasts input
0 unknown protocol, 0 symbol errors, 0 discards
0 input errors, 0 runts, 0 giants
0 no buffer, 0 overruns, 0 internal receive errors
0 alignment errors, 0 crc errors
0 packets output, 0 bytes
0 unicasts, 0 broadcasts, 0 multicasts output
0 output errors, 0 deferred, 0 discards
0 single, 0 multiple, 0 late collisions
0 excessive collisions, 0 underruns
0 internal transmit errors, 0 carrier sense errors
0 resets, 0 throttles
eth 0/2 is administratively down, line protocol is DOWN
Hardware address is 00:A0:C8:8B:28:68
Auto-negotiate speed, full-duplex
ARP type: ARPA; ARP timeout is 20 minutes
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
Queueing method: fifo
Output queue: 0/256/0 (size/max total/drops)
Interface Shaper: NOT ENABLED
0 packets input, 0 bytes
0 unicasts, 0 broadcasts, 0 multicasts input
0 unknown protocol, 0 symbol errors, 0 discards
0 input errors, 0 runts, 0 giants
0 no buffer, 0 overruns, 0 internal receive errors
0 alignment errors, 0 crc errors
0 packets output, 0 bytes
0 unicasts, 0 broadcasts, 0 multicasts output
0 output errors, 0 deferred, 0 discards
0 single, 0 multiple, 0 late collisions
0 excessive collisions, 0 underruns
0 internal transmit errors, 0 carrier sense errors
0 resets, 0 throttles
fxs 0/1 is UP
Two-wire Status is: Onhook
Test Status is INACTIVE
No Tests
Impedance is: 600 ohms +2.16uF
Transmit Gain is: -6.0dB
Receive Gain is: -3.0dB
Ring voltage is: 50 Vrms
Signal Mode: Loop-Start
Caller ID Format is: Multiple Data Message Format
Battery Mode: Auto
Currently using : High
fxs 0/2 is UP
Two-wire Status is: Onhook
Test Status is INACTIVE
No Tests
Impedance is: 600 ohms +2.16uF
Transmit Gain is: -6.0dB
Receive Gain is: -3.0dB
Ring voltage is: 50 Vrms
Signal Mode: Loop-Start
Caller ID Format is: Multiple Data Message Format
Battery Mode: Auto
Currently using : High
fxs 0/3 is UP
Two-wire Status is: Onhook
Test Status is INACTIVE
No Tests
Impedance is: 600 ohms +2.16uF
Transmit Gain is: -6.0dB
Receive Gain is: -3.0dB
Ring voltage is: 50 Vrms
Signal Mode: Loop-Start
Caller ID Format is: Multiple Data Message Format
Battery Mode: Auto
Currently using : High
fxs 0/4 is UP
Two-wire Status is: Onhook
Test Status is INACTIVE
No Tests
Impedance is: 600 ohms +2.16uF
Transmit Gain is: -6.0dB
Receive Gain is: -3.0dB
Ring voltage is: 50 Vrms
Signal Mode: Loop-Start
Caller ID Format is: Multiple Data Message Format
Battery Mode: Auto
Currently using : High
fxs 0/5 is UP
Two-wire Status is: Onhook
Test Status is INACTIVE
No Tests
Impedance is: 600 ohms +2.16uF
Transmit Gain is: -6.0dB
Receive Gain is: -3.0dB
Ring voltage is: 50 Vrms
Signal Mode: Loop-Start
Caller ID Format is: Multiple Data Message Format
Battery Mode: Auto
Currently using : High
fxs 0/6 is UP
Two-wire Status is: Onhook
Test Status is INACTIVE
No Tests
Impedance is: 600 ohms +2.16uF
Transmit Gain is: -6.0dB
Receive Gain is: -3.0dB
Ring voltage is: 50 Vrms
Signal Mode: Loop-Start
Caller ID Format is: Multiple Data Message Format
Battery Mode: Auto
Currently using : High
fxs 0/7 is UP
Two-wire Status is: Onhook
Test Status is INACTIVE
No Tests
Impedance is: 600 ohms +2.16uF
Transmit Gain is: -6.0dB
Receive Gain is: -3.0dB
Ring voltage is: 50 Vrms
Signal Mode: Loop-Start
Caller ID Format is: Multiple Data Message Format
Battery Mode: Auto
Currently using : High
fxs 0/8 is UP
Two-wire Status is: Onhook
Test Status is INACTIVE
No Tests
Impedance is: 600 ohms +2.16uF
Transmit Gain is: -6.0dB
Receive Gain is: -3.0dB
Ring voltage is: 50 Vrms
Signal Mode: Loop-Start
Caller ID Format is: Multiple Data Message Format
Battery Mode: Auto
Currently using : High
fxo 0/0 is DOWN
Two-wire Status: Disabled
Test Status: INACTIVE
No Tests
Impedance: 600 ohms +2.16uF
Transmit Gain: +0.0dB
Receive Gain: +0.0dB
TA908e#show lldp
Global LLDP information:
Sending LLDP packets every 30 seconds
Sending TTL of 120 seconds
TA908e#show media-gateway
Media-Gateway
1 slots, 1 DSPs, 30 channels
0 total sessions, 0 active sessions,
00:00:00 total session duration
0 total rx packets, 0 total rx bytes
0 out of order packets, 0 total unknown packets
0 total tx packets, 0 total tx bytes
0 early/late arrival discards
0 buffer full discards
Last clearing of counters: never
TA908e#show running-config
Building configuration...
!
!
! ADTRAN, Inc. OS version A4.11.00.E
! Boot ROM version 14.05.00.SA
! Platform: Total Access 908e (2nd Gen), part number 4242908L5
! Serial number CFG1016415
!
!
hostname "TA908e"
enable password password
!
!
ip subnet-zero
ip classless
ip routing
!
!
ip domain-proxy
!
!
no auto-config
!
event-history on
no logging forwarding
no logging email
!
no service password-encryption
!
username "admin" password "password"
!
banner motd #
Important
Web username/password is configured to admin/password.
Enable and Telnet passwords are configured to "password".
Please change them immediately.
The ethernet 0/1 interface is enabled with an address of 10.10.10.1
Telnet/SSH access is also enabled.
#
!
!
no ip firewall alg msn
no ip firewall alg mszone
no ip firewall alg h323
!
!
!
!
!
no dot11ap access-point-control
!
!
!
!
!
ip dhcp-server pool "Private"
network 10.10.10.0 255.255.255.0
netbios-node-type h-node
default-router 10.10.10.1
!
!
!
!
!
!
!
!
!
interface eth 0/1
ip address 10.10.10.1 255.255.255.0
no shutdown
!
!
interface eth 0/2
no ip address
shutdown
!
!
!
!
interface t1 0/1
no shutdown
!
interface t1 0/2
shutdown
!
interface t1 0/3
no shutdown
!
interface t1 0/4
no shutdown
!
!
interface fxs 0/1
no shutdown
!
interface fxs 0/2
no shutdown
!
interface fxs 0/3
no shutdown
!
interface fxs 0/4
no shutdown
!
interface fxs 0/5
no shutdown
!
interface fxs 0/6
no shutdown
!
interface fxs 0/7
no shutdown
!
interface fxs 0/8
no shutdown
!
!
interface fxo 0/0
no shutdown
!
!
!
!
!
!
!
!
!
!
no ip tftp server
no ip tftp server overwrite
ip http server
ip http secure-server
no ip snmp agent
no ip ftp server
no ip scp server
no ip sntp server
!
!
!
!
!
!
ip sip
ip sip udp 5060
no ip sip tcp
!
!
!
voice feature-mode network
voice forward-mode network
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
line con 0
no login
!
line telnet 0 4
login
password password
no shutdown
line ssh 0 4
login local-userlist
no shutdown
!
!
!
!
!
end
TA908e#show startup-config
Using 2262 bytes
!
!
! ADTRAN, Inc. OS version A4.11.00.E
! Boot ROM version 14.05.00.SA
! Platform: Total Access 908e (2nd Gen), part number 4242908L5
! Serial number CFG1016415
!
!
hostname "TA908e"
enable password password
!
!
ip subnet-zero
ip classless
ip routing
!
!
ip domain-proxy
!
!
no auto-config
!
event-history on
no logging forwarding
no logging email
!
no service password-encryption
!
username "admin" password "password"
!
banner motd #
Important
Web username/password is configured to admin/password.
Enable and Telnet passwords are configured to "password".
Please change them immediately.
The ethernet 0/1 interface is enabled with an address of 10.10.10.1
Telnet/SSH access is also enabled.
#
!
!
no ip firewall alg msn
no ip firewall alg mszone
no ip firewall alg h323
!
!
!
!
!
no dot11ap access-point-control
!
!
!
!
!
ip dhcp-server pool "Private"
network 10.10.10.0 255.255.255.0
netbios-node-type h-node
default-router 10.10.10.1
!
!
!
!
!
!
!
!
!
interface eth 0/1
ip address 10.10.10.1 255.255.255.0
no shutdown
!
!
interface eth 0/2
no ip address
shutdown
!
!
!
!
interface t1 0/1
no shutdown
!
interface t1 0/2
shutdown
!
interface t1 0/3
no shutdown
!
interface t1 0/4
no shutdown
!
!
interface fxs 0/1
no shutdown
!
interface fxs 0/2
no shutdown
!
interface fxs 0/3
no shutdown
!
interface fxs 0/4
no shutdown
!
interface fxs 0/5
no shutdown
!
interface fxs 0/6
no shutdown
!
interface fxs 0/7
no shutdown
!
interface fxs 0/8
no shutdown
!
!
interface fxo 0/0
no shutdown
!
!
!
!
!
!
!
!
!
!
no ip tftp server
no ip tftp server overwrite
ip http server
ip http secure-server
no ip snmp agent
no ip ftp server
no ip scp server
no ip sntp server
!
!
!
!
!
!
ip sip
ip sip udp 5060
no ip sip tcp
!
!
!
voice feature-mode network
voice forward-mode network
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
line con 0
no login
!
line telnet 0 4
login
password password
no shutdown
line ssh 0 4
login local-userlist
no shutdown
!
!
!
!
!
end
TA908e#show snmp
Chassis: Chassis ID
Contact Name:
Contact Phone:
Contact Email:
Contact Pager:
Management URL:
Management URL Label:
0 Rx SNMP packets
0 Bad community names
0 Bad community uses
0 Bad versions
0 Silent drops
0 Proxy drops
0 ASN parse errors
TA908e#show thresholds
t1 0/1:
SEFS 15 min threshold exceeded
UAS 15 min threshold exceeded
SEFS 24 hr threshold exceeded
UAS 24 hr threshold exceeded
t1 0/2:
SEFS 15 min threshold exceeded
UAS 15 min threshold exceeded
SEFS 24 hr threshold exceeded
UAS 24 hr threshold exceeded
t1 0/3:
SEFS 15 min threshold exceeded
UAS 15 min threshold exceeded
SEFS 24 hr threshold exceeded
UAS 24 hr threshold exceeded
t1 0/4:
SEFS 15 min threshold exceeded
UAS 15 min threshold exceeded
SEFS 24 hr threshold exceeded
UAS 24 hr threshold exceeded
Tracking information is automatically uploaded to ebay once your order ships.
We ship orders within the contiguous US with FedEx or USPS at our discretion. We use eBay's shipping calculator for all shipping rates.
PO Box, HI, AK, APO/FPO/DPO, and PR orders must be shipped via USPS. Please contact us or request an adjusted invoice before checking out.
Local Pickup
If you have purchased an item and prefer to pick it up, please select “Local Pickup” from the shipping options during checkout.
Then please contact us to arrange pickup.
Payment must be made through ebay prior to pickup.
Combined Shipping
We can typically provide a 30% shipping discount for multiple purchases that will fit in the same box.
For combined shipping, please click 'Request Total' or send us a message before checking out.
We can then adjust your invoice for combined shipping.
Expedited Shipping
In order to guarantee the rates and transit times shown, we must receive your order with its payment cleared by 12:00 PM EST during business days.
Orders placed after 12:00 PM EST will be shipped on the next business day.
Orders placed on weekends or holidays will be shipped the next business day.
Please plan your orders accordingly.
We strive to be a 5 star seller and hope that you are happy with your purchase.
If there is a problem with your order, please contact us through eBay messages or by phone before leaving feedback.
For items that are tested and working properly:
Our return window for working items listed as "New" or "Used" is 30 days.
If the item is no longer wanted or does not fit, the buyer is responsible for return shipping.
If the item is not working as described, we will work with you on the issue, please contact us to resolve.
Please review all product details and sale terms before making a purchase.