This item is pre-owned – it will work like new once programmed to your vehicle
One (1)
Aftermarket remote keyless entry fob alarm
Transmitter control clicker keyfob controller replacement
Clicker beeper controller keyfab fab phob keyphob car starter
Vehicle engine start wireless opener locker unlocker trunk opener access
FUNCTIONS AT 100% TESTED & GUARANTEED
POWER / Direkt Start iStart MAX START
Direct Starter / Sherlock Power Start
|
FCC ID KG5TX5 895183 F3 Board #: REM_P8TW PT2240 BOARD: P2020203 CHIP: PT2240B-S (Alternate Spelling: REMP8TW) Frequency: 304 MHz - 433 MHz LED color: Blue 1-way ONE WAY AM TRANSMITTER SLIDE COVER FOR BUTTONS DIREKT START 500, 501, 503, 800+, 888, ISTART, ISTART2 5 buttons: Lock, Unlock, Car Starter *, AUX – slider cover |
|
Compatible with the following systems: RS-525 RS525 SPA-2000 SPA200 P4 P5 Direkt Start 500 Direkt Start 501 Direkt Start 503 Direkt Start 800T Direkt Start 888 IStart Istart2 |
|
Program Remote: The Command Module is set by default to operate in a vehicle equipped with a manual transmission. For an Automatic transmission refer to FIG 1 and cut the loop NOTE: remember to always reset the unit (power on/off) after cutting the loop. A – To code the transmitter (hand brake must be ON or white/blue Grounder) 1. It is mandatory to override the starter kill and reactivate it before proceeding to the following step. A. Turn the key to IGNITION ON and within 6 seconds press and hold the programming button, the system will chirp once and the LED will stay on for 5 seconds then OFF for 5 seconds continuously (the system is NOW in Valet/Override). B. repeat the same procedure as in above STEP A, the system will chirp twice and the LED will stay OFF (the system is NOW back to normal, Valet/Override OFF). 2. Immediately after the system chirps TWICE, turn the key to IGNITION ON, Within 6 seconds, Push and RELEASE SLOWLY foot brake pedal 3 times = ED will flash rapidly, press immediately (within 5 seconds) LLOCK button of the transmitter. ONE long chirp will sound to confirm with parking lights flashing. To code a second and third remote, press the same LOCK button of the remote you are programming one after the other. B- OVVERIDE (to override the alarm and starter kill 1. Turn the key to Ignition ON and within 6 seconds 2. Press and hold the programming button. 3. The siren or horn will stop sounding, and the alarm and starter kill will be canceled instantly in case of lost or malfunction of the remote. To reactivate the alarm function, repeat steps 1 and 2. The system will chirp TWICE (2) to confirm. VALET (sleep mode) to put the system in “sleep mode” for car servicing or in “Valet Parking” 1. Turn the key to Ignition ON and within 6 seconds 2. Press and hold the programming button 3. The system will chirp once for valet mode activated ON. LED will stay ON for 5 seconds and then OFF for 5 seconds continuously. 4. To turn off the “sleep mode” or the “Valet Parking” repeat steps 1 and 2. The system will chirp 2 times to confirm. |
Program Remote To Your Vehicle
If you're not sure your vehicle can use this remote, please ask questions or contact your local dealer first.
This remote needs to be programmed to your vehicle in order for it to work with your vehicle’s installed RKE (remote keyless entry ) system:
1. PLEASE REFER TO YOUR ORIGINAL OWNER’S GUIDE FOR YOUR AFTERMARKET INSTALLED KEYLESS ENTRY SYSTEM OR
2. CONTACT A LOCAL CAR/AUDIO SHOP
3. CONTACT A LOCKSMITH
4. CONDUCT A GOOGLE SEARCH
5. CONTACT MANUFACTURER
Payment: We accept payment via PayPal or Credit Card. Please contact us via eBay messages for any questions concerning payments. Payment is expected within 5 days.
PA SALES TAX: As per the State of PA Franchise Board we must collect sales tax from PA Residents for any purchase made from our store.
Contact/Email: Due to scams etc, we DO NOT respond to emails. We only read/respond to EBAY MESSAGES. Messages & Best Offers are checked throughout the day & we typically respond 7 days a week. Please contact us with questions via eBay messages (keyless4u).
100% Guarantee Remote Shipping / Return Policy
Warranty/Returns:
1. We have a 30 day return policy.
2. All returns for replacements and refund need an RMA #.
3. Please contact us before returning items so we can give you the RMA # and the proper return address.
4. No refunds / replacements will be granted without an RMA#
We ensure proper working condition of all previously used or new remotes through a serious of tests performed with the Santronics Testing device. Each button is tested for functionality prior to shipment and then logged.
Please Note: Each remote and circuit board is UV id’d prior to shipment – All returns receive a UV ID inspection to verify originality of remote sent prior to refund or replacement.
Does this keyless remote entry come with a battery?
Yes. It will have a working battery installed.
Battery Condition:
A. All remotes sold on Keyless4u include working batteries.
B. Installed batteries are not tested for battery life- they are simply working.
Some are new and some are used.
Your vehicle will be installed with one of the following keyless entry systems:
a. Standard Keyless Remote Packages: Installed at time of manufacture.
b. Optional Keyless Remote Packages: Installed by a dealer.
c. Aftermarket Keyless Remote Packages: Installed by previous owner or a car/audio shop.
d. No remote keyless entry system at all.
The
above information can change which remote you need
for your installed remote keyless system.
Thank you! If you have any questions, please send us an eBay message!