Please note these stickers will only stick to smooth non-porous surfaces, eg glass, varnished wood, metal and plastic :) Please see the COLOUR CHART picture, if you would like a different colour than the one in the picture, please make sure you leave a message when purchasing if you do, otherwise you will be sent what is in the original picture :) Alternatively, please purchase from Item No. 335304439200 and choose your colour from the drop down box :) Measurements are in the pictures
All of these Stickers are external :) STEP 1 Make sure that you clean the area thoroughly with soap and water then dry. STEP 2 Prepare the sticker for application by firmly rubbing a bank card or similar across the length of the sticker. This makes the sticker cling to the application tape. STEP 3 Slowly peel the paper backing off of the sticker. All parts of the sticker should now be on the application tape. If any parts of the sticker cling to the backing, slowly replace the paper and repeat step 2 STEP 4 Place the sticker onto the desired surface and rub it in place firmly with a bank card or similar. For best results wait a few minutes before moving on to the next step STEP 5 Slowly peel the backing paper off at an angle. Be careful not to pull the sticker off the surface. If the sticker pulls away from the surface please repeat the previous step. |