New Radial Master Cylinder Lever Push Rod Adjuster for Orignal Brembo Radial Brake or clutch Levers. 

This is the barrel and rod assembly with a locking set screw found on the brake or clutch lever  

Fits Brembo Radial Front Brake or Clutch Masters only. Does not fit non-radial levers.

Made from Aircraft Spec Grade 5 Titanium parts are 40% lighter than the standard OEM Parts.

One property that stands out when compared to other metal bolts is that titanium bolts have the highest strength-to-weight ratio with a density of 4.51 g /cm3.

As an example, titanium grade 5 is 4 times stronger than 316 stainless steel at nearly half the weight.

This makes titanium bolts ideal for applications that require both lightness of weight and excellent strength while being highly corrosive resistance.

Please note: These are an market replacement lever push rod pin and not an OEM or Brembo pin. Manufactured by Jaybeebikerbits Ltd. from high grade titanium.
 They are however a perfectly usable replacement part for your motorcycle and handy if you have bought after market levers that did not come with these pins.

These should fit Brembo, Ducati, Aprilia, Biketek and CRG levers.
The photos in the listing are of the actual item offered for sale, please study them carefully prior to ordering.

When instaling pins please use grease to lubricate the movement in the lever.

*** PLEASE CHECK OPERATION OF BRAKE BEFORE RIDING TO CHECK FOR BINDING BEFORE RIDING**


LIFT FRONT WHEEL OFF FLOOR USING SUITABLE PADDOC STAND LIFT

SPIN WHEEL AND MAKE SURE BRAKE PADS ARE NOT BINDING ON THE DISC, IF BINDING ADJUST PIN LENGTH.

CHECK AGAIN BEFORE RIDING!!


FITS ALL BIKES BELOW - F-99 OR F-11 IS FOR THE BRAKE. 

H-11 IS FOR THE CLUTCH.



ALSO FITS MOST AFTERMARKET LEVERS , PLEASE CHECK YOUR LEVER IS MARKED WITH CODE F-11 F-99 H-11

BIKE MODEL YEAR(BRAKE / CLUTCH)


RSV4 FACTORY/RSV4-R/RR/RF (NOT V4SP) 2009-2024 (F-99/V-4A)
TUONO V4 1100RR/Factory 2017-2024 (F-99/V-4A)
RS660/Tuono 660 2021-2024 (F-99/V-4A)
RSV MILLE / R 2004-2008 (F-99/H-11)


Streetfighter V4/S 2020-2024 (F-99/H-11)
Panigale V4/S/R 2018-2024 (F-99/H-11)
Panigale/Streetfighter V2 2020-2024 (F-99/H-11)
Supersport/S 2017-2020 (F-99/D-17)
Diavel/Carbon/XDiavel/S 2011-2024 (F-99/H-11)
1299 Panigale/S/R 2015-2020 (F-99/H-11)
1199 Panigale/S/R/Tricolor 2012-2016 (F-99/H-11)
1198/S/R 2009-2011 (F-99/H-11)
1098/S/Tricolor 2007-2008 (F-99/H-11)
959 Panigale 2016-2019 (F-99/H-11)
899 Panigale 2014-2015 (F-99/H-11)
848 /EVO 2007-2013 (F-99/H-11)
Multistrada 1200/1260/S/GT 2010-2024 (F-99/H-11)
950 Multistrada/S 2019-2022 (F-99/H-11)
937 MONSTER/Plus 2021-2024 (F-99/H-11)
MONSTER 1200 / S / R 2014-2020 (F-99/H-11)
M1100/S/EVO MONSTER 2009-2013 (F-99/H-11)
HYPERMOTARD 1100/S/EVO SP 2007-2012 (D-01/H-11) 
HYPERMOTARD 950  2019-2022 (F-99/H-11)
999/S/R 2003-2006 (F-99/H-11)
749/S/R 2003-2006 (F-99/H-11)
MONSTER S4R/S4RS 2006-2008 (F-99/H-11)


CBR1000RR-R /SP 2020-2024 (F-99/V-4AH)
ZX10R / RR / KRT/SE 2016-2020 (F-99/K-828)


RC8 / R 2009-2016 (F-99/M-11)
1290 Super Duke R/GT 2014-2021 (F-99/M-11)
990 SuperDuke 2005-2012 (F-99/M-11)
690 Duke R 2014-2017 (F-99/A-90)
690 Duke 2008-2011 (F-99/M-11)


Brutale 1000RR 2020- (F-99/H-11)
RUSH 2020- (F-99/H-11)
F4 RR/F4 RC 2011-2018 (F-99/H-11)


DAYTONA 675 R 2011-2017 (F-99/T-333)
SPEED TRIPLE R 2016-2018 (F-99/T-333P)
SPEED TRIPLE R 2012-2015 (F-99/T-333)
SPEED TRIPLE 1050/S (Not RS) 2016-2020 (F-99/T-333P)
SPEED TRIPLE 1050 2011-2015 (F-99/T-333)
SPEED TWIN (1200cc) 2019-2023 (F-99/T-333P)
THRUXTON RS 2020-2024 (F-99/T-333P)
1200 Scrambler XC 2019-2020 (F-99/T-333P)
765 Street Triple R (NOT RS version) 2017-2019 (F-99/T-333P)




Track Page Views With
Auctiva's Counter
One property that stands out when compared to other metal bolts is that titanium bolts have the highest strength-to-weight ratio with a density of 4.51 g /cm3. As an example, titanium grade 5 is 4 times stronger than 316 stainless steel at nearly half the weight. This makes titanium bolts ideal for applications that require both lightness of weight and excellent strength while being highly corrosive resistance. Please note: These are an market replacement lever push rod pin and not an OEM or Brembo pin. Manufactured by Jaybeebikerbits Ltd. from high grade titanium.  They are however a perfectly usable replacement part for your motorcycle and handy if you have bought after market levers that did not come with these pins. The photos in the listing are of the actual item offered for sale, pl