High quality flex film with special surface effect laminated with a thermally activated adhesive. The holographic garment film contains colour changing chips that create the effect of a sparkly metallic finish which will take your t - shirt designs to another level!

The self adhesive polyester allows repositioning of transfers prior to pressing.

This garment film is suitable for use on Cotton, Polyester, Polyester/Cotton blends and washable up to 40°C.

Please note – due to variations in screen displays, colours shown are a guide only.

Sample packs of 5 pieces of 50mm x 50mm are available, colours can be mixed, just message colour requirements.

   Fitting Guide

Place item into cutter and set to Mirror Image. The item goes into the cutter with the shiney (carrier sheet) side facing down. 

Cut decal with a standard 45 degree blade at medium pressure, make sure that you only cut through the vinyl and not through the carrier sheet.

Remove excess vinyl and weed

Place decal onto garment with the carrier facing up and press. If using a household iron make sure that you press rather than iron and also make sure that there is no steam or water coming out of the iron as this will destroy the adhesive.

Remove carrier.

Application temp is 150-160 degrees, pressing time 17-20 seconds.

If you are not sure about using HTV there are many good instructional videos on Youtube - search Cutting and Applying Heat Transfer Vinyl.