eBay

Kit Includes

1x Complete Front Strut & Coil Spring Assembly - Driver Side - 272534

1x Complete Front Strut & Coil Spring Assembly - Passenger Side - 272535

Fitment

MAKE	MODEL	YEAR RANGE	SPECIFIC DETAILS
For ford	FLEX	2009	Built After 07/2009
For ford	FLEX	2010 - 2012	Naturally Aspirated

How to Install :

Step 1: Before You Lift the Vehicle, Loosen Lug Nuts One Full Turn.

Step 2: Jack up Vehicle and Use Jack Stands for Safety & Remove the Tire from the Rotor.

Step 3: (Wheel Alignment Is Necessary After Strut Replacement.) Marking the Position of All the Bolts Will Help Keep the Alignment Close to Original and save Time Aligning. Use a Colored Pencil to Mark the Old Strut on the Bolt.

Step 4: Use Penetrating Oil (Such As Wd40) to Coat Any Rusted Fasteners, Let Soak for Approximately 1 Hour.

Step 5: (Optional) While Waiting for Oil to Soak, Take This Time to Inspect All Other Components That May Need Replacement (Brake Pads, Rotors, Brake Hoses, Ball Joints, Cv Boots, Tie Rod Ends, Bushings, Sway Bars, Etc).

Step 6: Remove Any Brake Line or Wire Attachments from the Strut Body. Do Not Disconnect Brake Lines (If Possible)! Opening Brake Lines Will Require Bleeding of the Brake System.
Use Extreme Caution When Removing Brake Lines from Your Struts, As Any Damage to Your Brake Line Can Result in Expensive and Time Consuming Repairs.

Step 7: Remove Sway bar Attached to the Strut Assembly or Control Arm.

Step 8: Remove the Tie Rod (Only If It Attached to the Body of the Strut, If Not Leave It Attached to the Steering Knuckle).

Step 9: Remove the Strut to Knuckle Bolts at the Bottom of the Strut. on some Vehicles, the Brake Caliper and Rotor May Need to Be Removed to Gain Access.

Step 10: Remove the Upper Mounting Plate Bolts Located in the Engine or Trunk Compartment. Do Not Remove the Center Retaining Nut! It Is Not Safe to Unload the Spring from the Assembly in This Position.

Step 11: Carefully Remove the Old Strut Assembly from the Vehicle. Be Very Cautious Not to Let the Strut "Drop" down on Your Brake Line, Rotor or Drum.

Step 12: Install the New Complete Strut Assembly in the Reverse Order As Above (Steps 11-6). Using an Anti-seize Compound on All Fasteners Is Suggested.

Step 13: Carefully Double Check Your Work and Make Sure Everything Is Tightened to Manufacturers Torque Specifications.

Step 14: Replace the Tire the Rotor and Tighten to Manufacturers Torque Specifications.

Step 15: Slowly Lower the Vehicle down After Removing the Jack Stands. Pay Very Close Attention to Any Odd Sounds When the Vehicle Is Lowered Onto the New Complete Strut Assemblies.

Step 16: It Is Very Important That You Immediately "Road Test" Your Vehicle Right Away to Ensure That Installation Was Done Properly. Listen and Feel for Common Signs of Incorrect Installation While Driving Slowly over Speed Bumps, Rough Road or Potholes.

Payment Shipping Returns Contact Us FiveSoldtabLabel

1) KAC accepts all major credit cards via PayPal: MasterCard, Visa, American Express and Discover.

2) We will only ship to the confirmed PayPal shipping address given with the payment.

3) If you want to ship to aother address, please change your PayPal shipping address before you make payment.

4) To avoid initiating an unpaid item claim, please pay within 7 days.

1) We will ship items locally for US buyers. Usually, for US buyers it will take about 5-7 business days to reach. If you don't get it, please contact us firstly, we'll try our best to support you.

2) For US customers, all items will be shipped out within 1-2 business days with cleared payment. Please include your phone number in the payment note for prompt and secure shipment.

3) Tracking numbers for all orders are added to eBay once they have been dispatched; please log in to eBay to find the tracking information for your order.

1) KAC offers 5 years warranty and a 60 days free return.

Disclaimer: KAC provides a 60-Day easy return satisfaction guarantee. Items to be returned must be in original factory condition.

2) We offer a free return & money-back guarantee. If you are not satisfied with the product for any reason, you can return the item for refund or replacement/exchange. All returns must include the original packaging. (Please refer to our return policy for details.) If you have any questions, please contact us via eBay message.

3) Any items damaged because of incorrect installation will not be refunded.

4) Unauthorized reselling of KAC products is strictly prohibited and we can't honor the warranty if purchasing from an unauthorized reseller.

If you have ANY questions with shipping, product or service, please Contact Us first before leaving feedback/writing a review or filing a return case. We will solve the problem! We always put our customers first and your satisfaction is guaranteed.

Our KAC Tech are here to serve you. Email us and our expert team will swiftly diagnose the issue and offer the best solution within 12-24 business hours. All off-hours emails will be answered within 24-48 hours.