Description:
Intelligent dual mode manual Fully automatic two modes are available
LCD screen with backlight capable of displaying working time speed percentage current mode forward rotation reverse state
Slow start and slow down time can be set with speed upper limit lower limit setting
Tact switch to switch forward and reverse jog acceleration and deceleration solves the problem of traditional potentiometer
Can set working time, time to point stop
Specification:
Input voltage: DC10-55V
Output voltage: linear under load
Instant current: 40A
Continuous current: within 30A
Speed regulation type: flow regulation
Speed control mode: click + -
Wireless remote control: Not supported
Timing: Yes
Slow start slow stop: can be set
Speed digital display: 0-100 percent table
Speed range: 0 -- 100%
Control frequency: 15KHZ
Connection type: fence type terminal
Support motor: brush motor
Module size: Length * width * height 136mm*89mm*37mm
Net weight: 156g
Panel opening: length x width 129mm x 81.5mm
Speed digital display: percentage 0-100
0-1-2-3-4-5-6-7-8-9 Functional Settings are as follows:
Manual Automatic mode 0:1 indicates manual mode 2 Indicates automatic mode 1 Indicates manual mode By default.
Slow start time setting function 1:000-100 Slow start to 100% speed time is adjustable between 0-10 seconds The default is 1 second.
Slow stop time setting function 2:000-100 Slow stop time is adjustable between 0 and 10 seconds The default is 1 second.
Lower speed setting function 3:000-080 The minimum speed is adjustable from 0 to 80% and is less than the maximum speed setting value is 0 by default.
The maximum speed setting function is 4:000-100. The maximum speed is adjustable from 0 to 100%. The setting value is greater than the minimum speed.
Acceleration and deceleration value setting function 5:001 002 005 010 015 020 025 The speed changes by 1%,2%,5%,10%,15%,20%,25% each time the button is pressed.
The total motor running time setting function 6:1 SEC minimum -99 hours 59 minutes 59 seconds Maximum default is 99 hours 59 minutes 59 seconds.
The following functions 7.8.9. Time setting for automatic mode
Forward time setting function 7:1 second minimum -99 hours Maximum Default is 10 seconds
Stop time setting function 8:1 second minimum -99 hours Maximum Default is 10 seconds
Reverse time setting function 9:1 SEC min -99 hours Max Default is 10 SEC
Note: Input must be divided into positive and negative input voltage should be equal to the rated voltage of the motor (within 10-55V)
For example, the rated motor voltage 12V input governor 12V motor rated voltage 36V input governor voltage 36V, the input 220V will burn
Packageļ¼
1 * Digital 0~100% DC Motor Speed Controller
Note:
Please allow 0-3mm error due to manual measurement.
Due to the difference between different monitors, the picture may not reflect the actual color of the item.Thank you!
