Why purchase a recycled keyless entry remote transmitter?
The original remote came with a keyring loops.
The keyring loops on this remote is broken. We have drilled a hole to securely
hold your keyring loop. See photos.
The vehicle keyless remote key fob you are going to purchase from us is pre-owned; aka: used, previously loved ;). We recycle OEM and aftermarket keyfobs and put them through a concise refurbishing process so we can guarantee our products are delivered to you in a ready-to-program state. We offer these car clickers at a significant cost savings to stealerships so you can keep your hard earned cash for something more fun while lightening your ecological footprint J. We call that a win-win! Why wait? Add some convenience to your daily routine and help save the environment, order your recycled car remote control today!
Installed RKE System Type: Please be sure you have an AFTERMARKET (RKE) remote keyless entry system. If your current remote looks the same then this will work. Other options include: Dealer Installed or Factory. The system installed in your vehicle will CHANGE the required remote. If you are unsure send us a message with your current remotes FCC ID and Part # and LED Light color. If you no longer have your remote then send us a message with your system brand, and system id #.
What are you purchasing ? This is ONE (1) replacement keyless entry remote control that will work with your AFTERMARKET installed RKE system.
Compatibility: Works with vehicles that use a compatible aftermarket RKE (remote keyless entry) system installed. See our compatible system list below or match your current remote FCC ID and / or part # or circuit board # and LED Light color (if applicable)to the numbers listed below.
|
Compatible FCC ID#(s): |
H5OT21 |
|
Alternate Spellings |
H5O-T21, H5O T21, H5OT21, H5OT2I, HSOT21, H50T21 |
|
Part #(s) |
5BB Interchangeable Part #s) VT-67 TX447 XT-72S MT-67 Marksman 4BD X7RF IC:1640B-T01 |
|
Dealer #(s) |
|
|
Button Count: |
5 button; Lock, Unlock, Trunk, Start, Option |
|
Battery (installed): |
2; CR2016 |
|
Frequency: |
434 MHz |
|
LED Light Color: |
Green |
|
Circuit board #s: |
|
|
#s on Chip on board: |
|
|
Condition Notes: |
The original remote came with a keyring loops. The keyring loops on this remote is broken. We have drilled a hole to securely hold your keyring loop. See photos. Pre-Owned ready to program to your compatible vehicle RKE system. |
|
Compatible Aftermarket Installed Systems: |
Alert
350R |
|
Programming: Please note not all customers will be able to complete the programming on their own so if you are having trouble or unsure diagnostic programming is available at your local qualified automotive locksmith or car/audio shop. |
Note: The control module will only retain the last 4 remote transmitters programmed. If the transmitter memory is exceeded, the security system will start deleting transmitters from its memory in chronological order. 1. Turn the Ignition switch OFF and ON 3 times and then leave in the ON position. 2. Within 15 seconds, press the programming switch 3 times and on the 3rd, press and hold it in until 1 long chirp is heard and the LED starts to flash, then release the valet switch. You are now in the transmitter programming mode. 3. Press and hold any button on the transmitter until 1 chirp from the horn and 1 flash from parking lights confirms the first transmitter is now programmed. 4. If you have additional transmitters (up to 4) that need to be programmed, repeat step 3 for each transmitter. Exit: Turn the ignition switch to the OFF position, or wait for 15 seconds, 3 long chirps and 3 parking light flashes will confirm you have exited programming. |
Why does your vehicles installed RKE / Security system determine which remote control your can purchase?
The remotes job is to pair with your vehicles installed RKE system. It will only sync to a matching system; therefore, you cannot purchase a different type of remote than the remote manufactured with the system. It will not pair with a foreign system.
Programming:
We will send you information on how to locate programming requirement/instructions for your make, model, and year vehicle. Some vehicles have DIY (do-it-yourself) programming instructions available. While other vehicles require diagnostic programming which is available at your local qualified automotive locksmith or dealer.
Programming Requirement Information NOTE:
The vehicle manufacturers determine the programming requirements at the time of manufacture. We pass the programming requirements / instructions on to you as a courtesy. We do not write the programming nor do we determine which vehicles require diagnostic programming and which vehicles can be programmed by the you (DIY). We are not locksmiths nor mechanics nor are we familiar with EVERY vehicles program sequence. If you have questions:
1. Check your Vehicle Owners Manual for OEM Factory remotes or The User Manual for Dealer Installed or Aftermarket RKE systems.
2. YouTube has many video postings from do-it-yourselfers to assist with all kinds of questions & most customers find if very helpful to WATCH the programming being done which can eliminate mistakes in the sequence.
To locate the programming for your vehicle via this method go to YouTube and once there in the search bar type in the following:
i. If you have a factory RKE system: your make model year + the words program remote (i.e.: 2005 Ford Mustang program remote)
ii. If you have a dealer installed or aftermarket RKE system: the FCC ID or system type + the words program remote (i.e.: ELVAT5C program remote or AS200 program transmitter?)
3. For OEM FACTORY installed systems: send us an eBay message with your vehicles make, model & year = we can pass on to you any programming information requirements we have on hand.
4. For DEALER INSTALLED RKE installed systems: send us an eBay message with your remote controls FCC ID # and PART# and the vehicles make, model, & year = we can pass on to you any programming information requirements we have on hand (the programming for dealer installed RKE systems will be different than Factory or Aftermarket installed RKE systems).
5. For AFTERMARKET INSTALLED RKE installed systems: send us an eBay message with your remote controls FCC ID # and PART# = we can pass on to you any programming information requirements we have on hand (the programming for aftermarket installed RKE systems will be different than Factory or Dealer installed RKE systems).
6. There are also many auto forums that you can go onto by just conducting a google search with your questions.
7. or a local automotive locksmith or your local parts/car/audio store will typically be able to assist you if you are trying to avoid the dealer.