Cisco CPAK 100GBASE fiber modules for Cisco switches and routers
offer a selection of high-density 100-Gbps connectivity solutions. The
modules are especially well suited for connections in enterprise and
service provider data centers and in service provider edge networks.
The
line cards use the Cisco CPAK form factor. They are 20 percent smaller
and consume 40 percent less power than C Form-Factor Pluggable 2 (CFP2)
modules; they use 70 percent less power than the CFP interface. Cisco
CPAK modules give you up to 20 percent greater port density and
front-panel bandwidth than competing products.
Choose
the model that matches the distance you need to cover, the type of
fiber cabling you are using, and the Cisco networking product you are
using. Cisco CPAK 100GBASE modules work in the following Cisco
networking equipment: ASR 1000 Series Router; ASR 9000 Series Router;
CRS-X Carrier Routing System; NCS 2000, 4000, and 6000 Series Routers;
the Nexus 7000 and 7700 Series Switches, and the Cisco ONS Transport
Platform.
Features and benefits
Cisco
CPAK modules combine high density and bandwidth with low power
consumption and are interoperable with any IEEE-compliant 100GBASE-LR4
or 100GBASE-SR10 for investment protection and product choice. Some
models, including the Cisco CPAK 100GBASE-LR4, use Cisco Complementary
Metal-Oxide Semiconductor (CMOS) photonic technology to provide
industry-leading optical integration, performance, power savings, and
scalability.
Cisco CPAK 100GBASE-ER4 Lite Module
The
primary application of the Cisco CPAK-100G-ER4L and CPAK-100G-ER4F
modules is to support 100-Gbps optical links over long distances of
standard single-mode fiber (SMF, G.652) terminated with SC connectors or
LC connectors.
The ER4 Lite module is
compatible with the 100GBASE-ER4 standard and delivers an aggregate data
signal of 100 Gbps, carried over four LAN Wavelength-Division
Multiplexing (WDM) wavelengths operating at a nominal 25 Gbps per lane.
CPAK-100G-ER4L (no available FEC) supports link lengths up to about 25
km and CPAK-100G-ER4F supports link lengths up to about 30km with FEC
disabled and 40km with FEC enabled over standard SMF, G.652. Optical
multiplexing and demultiplexing of the four wavelengths are managed
within the module.
Galerie
PERFECTER
SERVICE
SCHNELLE
LIEFERUNG
PERFEKTER
SERVICE
30 TAGE
WIDERRUFSRECHT
Nam congue, pede vitae dapibus aliquet, elit magna vulputate arcu, vel tempus metus leo non est.
Etiam sit amet lectus quis est congue mollis. Phasellus congue lacus eget neque. Phasellus ornare, ante vitae consectetuer consequat, purus sapien ultricies dolor, et mollis pede metus eget nisi. Praesent sodales velit quis augue. Cras suscipit, urna at aliquam rhoncus, urna quam viverra nisi, in interdum massa nibh nec erat.
Phasellus congue lacus eget neque. Phasellus ornare, ante vitae consectetuer consequat, purus sapien ultricies dolor, et mollis pede metus eget nisi. Praesent sodales velit quis augue. Cras suscipit, urna at aliquam rhoncus, urna quam viverra nisi, in interdum massa nibh nec erat.
Nam congue, pede vitae dapibus aliquet, elit magna vulputate arcu, vel tempus metus leo non est.
Etiam sit amet lectus quis est congue mollis.
Phasellus congue lacus eget neque. Phasellus ornare, ante vitae consectetuer consequat, purus sapien ultricies dolor, et mollis pede metus eget nisi. Praesent sodales velit quis augue. Cras suscipit, urna at aliquam rhoncus, urna quam viverra nisi, in interdum massa nibh nec erat.
Nam congue, pede vitae dapibus aliquet, elit magna vulputate arcu, vel tempus metus leo non est.
Purus sapien ultricies dolor, et mollis pede metus eget nisi. Praesent sodales velit quis augue. Cras suscipit, urna at aliquam rhoncus, urna quam viverra nisi, in interdum massa nibh nec erat.