Specialising in used Nissan Parts for a
wide variety of Nissans, including the
Skylines, GTR and 200sx/Silvias.
Haltech ECU ELITE 1500+ Fits Honda OBD-I B-Series
SUITS: Plug 'n' Play replacement of the factory ECU for fits honda OBD-I B-Series 92-95 Civic, Integra and Prelude. 90-95 Accord. Manual transmission only.
INCLUDES: Elite 1500 ECU with DBW and Race Functions, injection molded plastic plug 'n' play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin TYCO plug and pins, USB programming cable and USB software key.
OVERVIEW
·If you are using a factory
harness and are after an easy ECU upgrade, take a look at Haltech Plug'n'Play
Adaptor Kits. These adaptors plug directly into your Haltech ECU and have a set
of factory connectors on the other side which plug straight into the factory
harness.
·simple Haltech Plug'n'Play
product that allows you to be up and running in just a few hours.
·quick start guide will walk you
through installation of the Haltech Plug'n'Play adaptor into your vehicle.
·guide is accompanied by the full
ECU manual and Software located on the CD or USB key provided with the ECU to
refer to while completing your installation and configuration.
ECU OVERVIEW
·Featuring a robust,
environmentally sealed waterproof case, drive by wire throttle control, intake
and exhaust cam control, short term and long term map learning, knock control,
and much more, the Elite 1500 ECU provides engine calibrators the tools they
need to get the job done right. Alongside the Elite 1500 ECU is the Elite
Software Programmer (ESP) that brings levels of functionality and user
friendliness never seen before in an engine control package. Together they
offer true cutting edge technology to tuners and performance enthusiasts
worldwide.
·Supports 1 to 12 cylinder
engines
·2 rotor engines
·Normally aspirated or forced
induction
·Distributor ignition systems,
multi-coil systems, expand CDI range or Haltech Multiplex CDI systems
·Connect to a wide range of
display dashes and expansion devices via CAN.
·2 x dedicated engine position
inputs with extensive trigger type support
·Up to 45 channels of Input &
Output (I/O) expansion (via CAN)
·USB laptop communication
(Windows)
·ESP Calibration Software -
intuitive and easy to use
FEATURES
·harness when installed in
conjunction with a Haltech Elite ECU opens the door to virtually limitless
performance modification and tuning of your vehicle.
·programmable systems allow you
to extract all the performance from your engine by delivering precisely the
required amount of fuel and ignition timing that your engine requires for
maximum output under all operating conditions.
ECU FEATURES
·Drive by Wire Throttle Control
(DBW).
·Low Impedance Injector control
with programmable injector peak and hold currents and programmable peak time.
·Flex fuel support (Direct sensor
input). Tune your engine's boost, fuel and ignition by ethanol content.
·Flexible tuning setup for Petrol
(Gasoline), Methanol and Ethanol.
·Closed Loop 02 Control. Dual
bank control for precise tuning (with optional external CAN O2 Wideband
Controller Kit).
·Knock Control. Synchronised to
engine position with high speed digital filtering for accurate detection.
·Variable cam control -
Independently control up to 4 camshafts.
·Closed Loop Idle Speed Control
with learning for consistent idle stability.
·Long term learning (auto tune)
on fuel, ignition, cam, boost and idle control maps (up to 4D).
·On-board data logging. Up to 40
channels of logging at sample rates up to 5ms (200Hz) with 2MB of internal
memory.
·Laptop data logging. DLog all
available channels directly to your laptop's hard drive for both tuning and
diagnostics.
·Dual CAN Bus communication for
Haltech dashes and expansion devices. Supports OEM CAN and OBDII. View live
engine data and set/clear diagnostic trouble codes.
·1 - 4 Injection stages with
individual injector flow rates per injector.
·Anti-Lag/Rotational idle for
closed course racing, rally, circuit or drift. Build and maintain boost during
closed throttle conditions.
·Rolling Anti-Lag. Lock to your
current or pre-set RPM or road speed for roll racing or pit lane limiting.
·Launch Control. Control your
engine's power delivery, RPM and boost for consistent performance at the start
line.
·Traction Control. Control your
engine's power output via mappable front vs rear axle or individual wheel speed
slip.
ADVANCED TUNING
·Tuning table resolution up to 32
x 32 x 8
·Limitless tuning flexibility.
Tune your engine by a combination of 4D tuning tables combined with 3D per
cylinder compensations and multiple user-definable corrections.
·Per Cylinder Tuning Correction -
3D
·Wideband O2 Control. Connect up
to 9 channels via CAN expansion devices.
·Thermocouples/EGT (Exhaust Gas
Temperature). Connect up to 12 channels via external CAN expansion devices.
·Advanced Engine Protection. Set
multi-level limits for sensors and protect your engine against common causes of
failure.
RACE FUNCTIONS
·Nitrous control with advanced
programming of up to 6 stages of wet or dry nitrous kits with on/off delays and
banked control options. 3D fuel and ignition corrections for all stages.
·Boost control. Intelligent 4D
closed loop learning with flexible, user-definable axis and 14 fully
user-definable corrections.
Sequential turbo control
·CO2 boost control. Wastegate
pressure and position, intake air bleed control (charge pipe wastegate)
functionality for the hard-core racer.
·Flat shifting. Optimise your
shifting precision via a combination of inputs such as a clutch switch or
strain gauge.
·Shock Travel/Ride Height inputs
allow dynamic tuning and data logging to assist in chassis development and
power delivery.
·Timer functions. Use the
combination of the race timer and 5 additional programmable timers for
time-based control of multiple engine parameters, power delivery and other user
definable functions.
·Trans brake function allows
smooth and consistent control of start line staging (Bump or Creep).
Payment
Payment must be made within 5 working days using one of the following methods PayPal, credit card (Visa, Mastercard, Switch or Visa/Delta) or bank transfer. We do not accept payment via cheque, postal order or any other means.
SHIPPING
We ship all items within 3 working days unless otherwise specified.
The listing delivery price is for shipping to the Mainland UK ONLY. This does not include Channel Islands, Northern Ireland and Scottish Highlands. Please contact us for a shipping quote to these destinations or any overseas destinations. Shipping, Handling and Insurance Fees are not negotiable.
We do not ship items on weekends, bank holidays or national holidays.
We ONLY ship to the PayPal address used when paying for the item. We are not responsible for incorrect or undeliverable addresses and you may be charged for a re-delivery.
We will ship worldwide, please email us your complete address for a quote.
If your parcel has been dispatched and not arrived please contact us via email or phone and we can provide tracking details for your parcel.
You will be required to sign for your parcel when it is delivered. If you are not at home when the parcel arrives, a card will be left for you to arrange an alternative delivery date with the courier.
Frequently Asked Questions
What can I do if the item I've received is not as described or damaged? Please contact us as soon as possible to make us aware of a problem, we'll do our best to solve this for you as quickly as we can.
When will you post my item? Within 3 working days, unless otherwise specified.
When will I receive my item? All Mainland UK orders are dispatched by Royal Mail First Class or City Link, depending on the size and weight of the item. You should receive your item within 1 - 2 days of dispatch. For all Offshore and International orders please contact us to find out the delivery time to your country.
Can I ask for a refund or replacement if I haven't received my item? If your item has been sent my Royal Mail you should allow 15 days from the date of dispatch before an item is considered lost. If your item has been shipped by City Link please contact us within 1 - 2 days. If you have any queries regarding your delivery please contact us.
Can I ask for a refund or replacement if I'm not satisfied with the item I've received? According to the Distance Selling Regulations you have 14 working days from the day you receive the item to cancel your order. We allow 14 DAYS for you to cancel your order and return it to us, return postage is to be paid for by yourself and we recommend suitable insurance. Once the item has been returned and checked over we will issue a refund EXCLUDING the cost to us of the original delivery charge, even if the item is listed with Free Delivery.