This item is pre-owned – it will work like new once programmed to your vehicle

 One (1)

Aftermarket remote keyless entry fob alarm

Transmitter control clicker keyfob controller replacement

Functions at 100% Tested & Guaranteed

Marksman

 

 

FCC ID: H5OT21

( Alternate Spelling: H50T21 )

 Part #: X7RF

 Interchangeable Part #s:

MT-67

VT-67

TX447

XT-72S

Marksman 5BB

Marksman 4BD

X7RF

 IC: 1640B-T01

Frequency: 434 MHz

 LED color: RED

 5 buttons

 Battery: 1:CR2025

 

 

 Compatible with the following systems:

 

 

 

Alert 350R

Alert 400S

Alert 450R

Alert 650R

Alert 750R

 

CS-350R

CS-400S

CS-450R

CS-650R

CS-750R

 

 

M2

M2A

M3

M3A

M4

M5

M5A

M6

M6A

M7

M7A

M8A

M9A

M12A

 

X3

X4

X6

X7

X9

 

XL 2110

XL 2111

 

 

Programming Instructions:

Note: The control module will only retain the last 4 remote transmitters programmed. If the transmitter memory is exceeded, the security system will start deleting transmitters from its memory in chronological order.

1. Turn the Ignition switch OFF and ON 3 times and then leave in the ON position.

 

2. Within 15 seconds, press the programming switch 3 times and on the 3rd, press and hold it in until 1 long chirp is heard and the LED starts to flash, then release the valet switch. You are now in the transmitter programming mode.

 

3. Press and hold any button on the transmitter until 1 chirp from the horn and 1 flash from parking lights confirms the first transmitter is now programmed.

 

4. If you have additional transmitters (up to 4) that need to be programmed, repeat step 3 for each transmitter.

 

Exit: Turn the ignition switch to the OFF position, or wait for 15 seconds, 3 long chirps and 3 parking light flashes will confirm you have exited programming.

100% Guarantee Remote Shipping / Return Policy

We ensure proper working condition of all previously used or new remotes through a serious of tests performed with the Santronics Testing device. Each button is tested for functionality prior to shipment and then logged.

Please Note: Each remote and circuit board is UV id’d prior to shipment  – All returns receive a UV ID inspection to verify originality of remote sent prior to refund or replacement.

 

Does this keyless remote entry come with a battery?  

Yes. It will have a working battery installed.

Battery Condition:

        A. All remotes sold on Keyless4u include working batteries.

        B. Installed batteries are not tested for battery life- they are simply working.

             Some are new and some are used.

 


 

Your vehicle will be installed with one of the following keyless entry systems:  

  a. Standard Keyless Remote Packages: Installed at time of manufacture. 

  b. Optional Keyless Remote Packages: Installed by a dealer. 

  c. Aftermarket Keyless Remote Packages: Installed by previous owner or a car/audio shop. 

  d. No remote keyless entry system at all.

The above information can change which remote you need
for your installed remote keyless system
.