Product features and working mode operation:
Connect the receiving module to the product you need, turn on the power supply, press the black learning button 8 times in a row to clear the code, and select different times according to the prompts to perform code matching.
Connect the receiving module to the product you need, turn on the power supply, press the black learning button 8 times in a row to clear the code, and select different times according to the prompts to perform code matching.
1. Jog learning method:
Press the learning and pairing button on the control panel once, the LED indicator turns off, and enters the learning state. Take out the remote control and press the A and B buttons each once. The LED indicator flashes 5 times in a row and goes out. Pairing is successful.
Press the learning and pairing button on the control panel once, the LED indicator turns off, and enters the learning state. Take out the remote control and press the A and B buttons each once. The LED indicator flashes 5 times in a row and goes out. Pairing is successful.
2. Self-locking learning method:
Press the learning and pairing button on the control panel twice, the LED indicator turns off, and enters the learning state. Take out the remote control and press the A and B buttons each once. The LED indicator flashes 5 times in a row and goes out. Pairing is successful.
Press the learning and pairing button on the control panel twice, the LED indicator turns off, and enters the learning state. Take out the remote control and press the A and B buttons each once. The LED indicator flashes 5 times in a row and goes out. Pairing is successful.
3. Interlocking learning method:
Press the learning and pairing button on the control panel 3 times, the LED indicator turns off, and enters the learning state. Take out the remote control and press the A and B buttons each once. The LED indicator flashes 5 times in a row and goes out. Pairing is successful.
Press the learning and pairing button on the control panel 3 times, the LED indicator turns off, and enters the learning state. Take out the remote control and press the A and B buttons each once. The LED indicator flashes 5 times in a row and goes out. Pairing is successful.
Explanation of jog/self-locking/interlocking:
Jog: Press and hold the remote control key, the corresponding relay is connected, release the remote control key, the corresponding relay is disconnected.
Self-locking: Press the corresponding remote control key once, the relay is turned on, and press the corresponding remote control key with the same key again, the relay is turned off.
Interlocking: Press a corresponding key of the remote control, the corresponding relay is connected, and then press another key of the remote control to disconnect the relay, maintaining a group of working conditions.
Jog: Press and hold the remote control key, the corresponding relay is connected, release the remote control key, the corresponding relay is disconnected.
Self-locking: Press the corresponding remote control key once, the relay is turned on, and press the corresponding remote control key with the same key again, the relay is turned off.
Interlocking: Press a corresponding key of the remote control, the corresponding relay is connected, and then press another key of the remote control to disconnect the relay, maintaining a group of working conditions.
Add remote control:
To add multiple remote controllers on the basis of the original remote controller, just follow the second step of the code matching process above. Remember that adding a remote controller does not require clearing the code! This receiver is compatible with 15~25 remote controllers. When 13 remote controllers are learned, the first remote controller will automatically fail!
To add multiple remote controllers on the basis of the original remote controller, just follow the second step of the code matching process above. Remember that adding a remote controller does not require clearing the code! This receiver is compatible with 15~25 remote controllers. When 13 remote controllers are learned, the first remote controller will automatically fail!
Specification
Receiver parameters:
Working voltage: DC6V 12V 24V power supply is not recommended to use dry batteries
1~2A DC or large battery is recommended
Working temperature: -10℃+60℃
Working frequency: 433Mhz
Standby current: 0MA
Working current 150MA
Working mode: three modes of jog, self-locking and interlocking, which can be switched between each other
Output mode: passive switch signal
Load power: When using 20A relay load power to control 12V, it is recommended not to exceed 40W, and when controlling 24V, it is recommended not to exceed 80W. If it exceeds, you can connect a large relay by yourself.
Encoding type: Pairing with remote control through receiver learning button
Dimensions: 68mmⅹ48mmⅹ15mm
Working mode: interlocking, self-locking, jogging (transformation mode product display picture 1)
Matching remote control: can be matched with any remote control in the store
Receiver parameters:
Working voltage: DC6V 12V 24V power supply is not recommended to use dry batteries
1~2A DC or large battery is recommended
Working temperature: -10℃+60℃
Working frequency: 433Mhz
Standby current: 0MA
Working current 150MA
Working mode: three modes of jog, self-locking and interlocking, which can be switched between each other
Output mode: passive switch signal
Load power: When using 20A relay load power to control 12V, it is recommended not to exceed 40W, and when controlling 24V, it is recommended not to exceed 80W. If it exceeds, you can connect a large relay by yourself.
Encoding type: Pairing with remote control through receiver learning button
Dimensions: 68mmⅹ48mmⅹ15mm
Working mode: interlocking, self-locking, jogging (transformation mode product display picture 1)
Matching remote control: can be matched with any remote control in the store
List
1 x Module
2 x Remote Control (battery not included)
1 x Module
2 x Remote Control (battery not included)
- We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
- Payment must be received in 5 business days of auction closing.
- Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
- Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Fill your shipping info
- All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
- If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
- If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.