This is the FISHMAN Presys+ 301, the new version of the Mic Blend Acoustic Guitar Preamp EQ Piezo Pickup. 

It is designed to fit acoustic guitars and features an active pickup that can be easily mounted on the bridge position. The unit comes in black color and is sold as a single piece. Some of the aspects of this product include the brand, Fishman, the type of pickup, piezo, and the fact that it is an active unit. 

The Presys+ 301 also includes a mic blend feature that allows the user to mix the pickup and microphone signals for a richer and more natural sound. This product is perfect for those who want to upgrade their acoustic guitar's sound without having to worry about the condition of the pickup.

New Version FISHMAN Presys Blend 301 Guitar Pickup with Mic Dual Mode Preamp EQ Tuner Beat On Board With Soft Piezo

Presys Blend Quick Start


1. Set the controls * Set volume, mic blend and notch off. Set the bass, middle and treble controls to center.

2. Plug in * Connect the Presys Blend to an amplifier or PA with a 1/4-inch instrument cable. The battery light will flash once quickly to indicate it has switched on.

3. Turn up * Raise the volume and adjust the bass, middle and treble controls to your liking.

4. Mix in the mic * Raise the mic blend to mix in the onboard microphone.

Presys Blend Controls

  • Volume * For the cleanest signal, set the volume knob as high as possible, without causing distortion or feedback
  • Bass * Boost here to add depth and weight to the sound of the guitar.
  • Middle * Turn the middle knob all the way left for a smooth "scooped out" tone at high volume levels. Raise the middle knob to the right of center to add midrange "bite" to the sound.
  • Treble*Boost to cut through the mix. Cut to mellow and subdue the sound.
  • Notch * Tune the notch filter to remove low-end feedback. Raise the volume until feedback occurs, then slowly turn the notch to the right until the feedback is eliminate
  • Phase*Use the phase switch to improve bass response at low volume and suppress feedback at high volume.
  • MicBlend * This control determines the balance between the internal micro- phone and your pickup signal. Turn the control left of center for more pickup or right of center for more microphone, enhancing the natural sound of your pickup output. At high volume levels, mix in less microphone to prevent feedback.
  • Mic Trim * A dedicated microphone volume is located on the side of the preamp body. Set the mic blend knob to the center position and adjust the mic trim with a small slotted screwdriver until the microphone and pickup levels are balanced to your liking.
  • Tuner * Use the tuner lights as shown below to tune your instrument.
Battery * When the indicator lights steadily it is time to change the battery To conserve power, unplug the instrument and turn off the tuner when not in use. Replace the battery by flipping open the preamp body using the latch located above the logo. Be sure to observe the correct polarity during this installation.