MPS2280D for 5 PCIE to M.2 Dual NVME SSD HAT PCB G6W87122
1. Supports 2230/2242/2280 sizes of solid-state drives (only 2280 copper pillars are welded by default)
2. Only for storage expansion, not for booting from the SSD drive.Only support PClE 1x Gen2. Enable the NVME SSD by add following in the config. dtparam=nvme
3. Can power the M.2 card directly from the FPC PCle ribbon (port providing at least 1.5A at 5V of continuous power) or through an optional 2-pin pitch bundle for redundant power supply (up to 3A at 5V). Since the ssD speed was limited to 1x Gen2, the current consumption is less than rated, AUX power not needed for most SSD.
4. The board's dimension is 56x86mm, it's slight longer than the for RPi 5 PCB
5. We've made a slot at 40Pin on the board, which doesn't interfere with wire connections
Due to different batches, the appearance, color and printed words of the product , which will not affect the use.
Colour:Blue
Material:PCB
Package Contents:
1 * MPS2280D for 5 PCIE to M.2 Dual NVME SSD HAT kit
2. Only for storage expansion, not for booting from the SSD drive.Only support PClE 1x Gen2. Enable the NVME SSD by add following in the config. dtparam=nvme
3. Can power the M.2 card directly from the FPC PCle ribbon (port providing at least 1.5A at 5V of continuous power) or through an optional 2-pin pitch bundle for redundant power supply (up to 3A at 5V). Since the ssD speed was limited to 1x Gen2, the current consumption is less than rated, AUX power not needed for most SSD.
4. The board's dimension is 56x86mm, it's slight longer than the for RPi 5 PCB
5. We've made a slot at 40Pin on the board, which doesn't interfere with wire connections
Due to different batches, the appearance, color and printed words of the product , which will not affect the use.
Colour:Blue
Material:PCB
Package Contents:
1 * MPS2280D for 5 PCIE to M.2 Dual NVME SSD HAT kit
