Huepar 704CG 16 Lines 4D Green Laser Level Specifications:
Laser Beam: Green Beam
Projection: 16 Green Laser Lines
Laser Class: Class 2 (IEC/EN60825-1/2014), <1mW power output
Laser Wavelength: 505nm-520nm
Horizontal / Vertical Accuracy: ±2mm/10m, ±1/13 in. at 33 ft
Leveling / Compensation Range: 3.5°±1°
Leveling Time: ≤3s
Working Distance: ≥20m, ≥40m with detector
Working Time: About 10 hours
Power Source:7.4V / 2600mAh Li-ion battery & 4 x AA battery
Mount Size: 1/4"-20 & 5/8"-11
IP Rating: IP54, waterproof, dustproof and shockproof, reliability and robustness
Operating Temperature: Between -10℃ and +50℃
Storage temperature: Between -20℃ and +70℃
This 360 laser level can set 2 modes, self-leveling mode, and manual mode. Unlock the pendulum, and enable the self-leveling mode, when the tool exceeds the self-leveling range by 3.5°±1°, The laser beam(s) will blink about every 3-5 seconds to notify the user it is not self-leveling now. Once the pendulum is locked, it switches to manual mode, the self-leveling function is disabled, the cross laser tool is locked, and you can position the laser level at any angle you need.
Power by a 3.7V / 6600mAh lithium battery with the Type-C charging port can be charged separately and provides up to 10 hours of running time.
Direct input charging: When taking in the battery, the laser tool can be used at the job.
Three battery indicators on the keypad allow users to know the current battery volume.
Charging protection helps prevent overcharging.
The line laser reaches IP54 protection grade (shock resistant, waterproof, dustproof, shockproof, wear-resistant, impact resistant, cold and high temperature.). The durable and high-quality shockproof enclosure provides 4 ft. collision protection. It's compact and lightweight for easy gripping, but large enough to sit stably, ideal for construction site work.
4 X 360° Laser Line Switching:
This laser tool provides four 360° levels of laser lines. The upper horizontal 360° line can be used for ceiling installation. The lower 360° horizontal line can be used for tile installation.
A 360° horizontal line and a 360° vertical line are crossed at a 90° angle to allow the user to quickly visualise and complete the square layout.
Briefly press the H/V key on the keyboard to switch the horizontal and vertical laser lines.
Turn ON the pulse mode: After powering ON, short press the "P" button to switch ON/OFF the pulse mode.
Pulse mode extends the working range up to 60m/197ft in brighter working conditions when using Huepar Line Laser Detector (ASIN: B07GVC2XD9).
When the pulse mode is activated, the laser beams are dimmer, the pressure on the eyes is less when working at close range, and the working time can be appropriately extended.
It is compatible with Huepar LR-6RG / LR-5RG Line Laser Receiver (need to purchase separately) only.
Short press the “Light bulb” button to adjust the beam's brightness.
When turning on the unit, the beam(s) is full brightness by default and the Power Indicator lights up in Green.
●Short press the “Light bulb” button to reduce the brightness. The power Indicator will be on and flash as a reminder.
●Short press the “Light bulb” button again to reduce the brightness further. The power Indicator will be on and flash quickly.
*Note: The brightness cannot be adjusted under pulse mode.
The laser level is equipped with a 360° strong magnetic bracket (not removable)that allows for quick positioning to metal surfaces, helping hang the laser level for wall applications. And the 1/4"-20 and 5/8"-11 mounting threads on the bottom of the bracket can suit different tripod threads.