TAKE NOTE: Original keyring loop is broken off ? a hole has been drilled to securely hold a keyring? see photo

Installed RKE System Type: Please be sure you have an DEALER INSTALLED (RKE) remote keyless entry system. If your current remote looks the same AND has the same FCC ID # then this remote will work with your current systme. Other options include: Aftermarket or Factory. The system installed in your vehicle will CHANGE the required remote. If you are unsure send us a message with your current remotes FCC ID and Part # and LED Light color. If you no longer have your remote then send us a message with your system brand, and system id #.

What are you purchasing ? This is ONE (1) replacement keyless entry remote control that will work with your Dealer Installed RKE system. We sell these transmitters in conditions as well.

Compatibility:

Compatible FCC ID#(s)

 GQ43VT6T

Alternate Spellings

GO43VT6T
GO43VT67
GQ43VT67

Part #(s)

1470 K1362 TRW ISC:1470K1362

Dealer #(s)

MR123944

Button Count:

3: Lock, Unlock, Panic

Battery (installed):

 1; CR2032

Frequency:

 315 MHz

LED Light Color:

 Red

Condition Notes

 Pre-Owned >> Original keyring loop is broken off ? a hole has been drilled to securely hold a keyring? see photo

Programming Instructions:

Programming the alarm to accept the remote (or have a locksmith do this for you):

 

1. Locate the OBD2 Data Port.

2. Insert keys in ignition and leave in the OFF position.

3. Make sure there are metal contact pins in terminals 1 and 4 and connect the Data Port with a suitable jumper wire, leave jumper wire connected throughout the programming procedure. Make sure you know which terminals are 1 and 4.

4. Within 10 seconds after connecting the jumper wire, turn the ignition switch to the ACC position and then back to OFF. Note: The doors will automatically lock and unlock once at this time indicating that the system is in the programming mode.

5. Press the LOCK button on the transmitter to be registered three times within 10 seconds. Upon successful programming, the door will lock and unlock once.

6. If there are two remotes, register the first, then register the second. Repeat step 5 within one minute to program second remote. After completing the second programming, the doors will lock and unlock once.

7. Disconnect the programming wire and remove the keys from the ignition.

 

 

Compatibility:  Works with vehicles that use a dealer installed keyless entry system listed in my compatibility section above.

Why does your vehicles installed RKE / Security system determine which remote control your can purchase? The remotes job is to pair with your vehicles installed RKE system. It will only sync to a matching system; therefore, you cannot purchase a different type of remote than the remote manufactured with the system. It will not pair with a foreign system.

Programming: We will send you information on how to locate programming requirement/instructions for your make, model, and year vehicle. Some vehicles have DIY (do-it-yourself) programming instructions available. While other vehicles require diagnostic programming which is available at your local qualified automotive locksmith.

Programming Requirement Information NOTE: The vehicle manufacturers determine the programming requirements at the time of manufacture. We pass the programming requirements / instructions on to you as a courtesy when we have them. We do not write the programming nor do we determine which vehicles require diagnostic programming and which vehicles can be programmed by you (DIY). We are neither locksmiths nor mechanics nor are we familiar with EVERY vehicles program sequence. If you have questions:

     1. Check your Aftermarket system manual.

  2.     You Tube has many video postings from do-it-yourselfers to assist with all kinds of questions & most customers find if very helpful to WATCH the programming being done which can eliminate mistakes in the sequence.

a.    To locate the programming for your vehicle via this method go to You Tube and once there in the search bar type in the following:

                                                              i.      If you have a factory RKE system: your make model year + the words program remote (i.e.: 2005 Ford Mustang program remote?)

                                                            ii.      If you have a dealer installed or aftermarket RKE system: the FCC ID or system type + the words program remote (i.e.: ELVAT5C program remote or AS200 program transmitter)

  3.     For OEM FACTORY installed systems: send us an eBay message with your vehicles make, model,
       & year = we can pass on to you any programming information requirements we have on hand.

       4.    For DEALER INSTALLED RKE installed systems: send us an eBay message with your remote controls FCC ID # and PART# and the vehicles make, model, & year = we can pass on to you any programming information requirements we have on hand (the programming for dealer installed RKE systems will be different than Factory or Aftermarket installed RKE systems).

       5.      For AFTERMARKET INSTALLED RKE installed systems: send us an eBay message with your remote controls FCC ID # and PART# = we can pass on to you any programming information requirements we have on hand (the programming for aftermarket installed RKE systems will be different than Factory or Dealer installed RKE systems).

       6.     There are also many auto forums that you can go onto by just conducting a google search with your questions.

        7.     or a local automotive locksmith or your local parts/car/audio store will typically be able to assist you if you are trying to avoid the dealer.