![](https://www.ocdepot.com/template/Rounded_Left_Top.gif) |
![](https://www.ocdepot.com/template/Rounded_Middle_Top.gif)
|
![](https://www.ocdepot.com/template/Rounded_Right_Top.gif) |
![](https://www.ocdepot.com/template/Rounded_Middle_Left.gif) |
TESTING & COSMETIC NOTES:
This is a USED WORKING item in GOOD cosmetic condition that IS THOROUGHLY TESTED and is GUARANTEED WORKING The unit has been reset to the factory default settings. See console log below.
username/password:
admin/admin
COMPONENTS INCLUDED IN THIS AUCTION:
![https://www.ocdepot.com/template/spacer.gif](https://www.ocdepot.com/template/spacer.gif) • (1) - CISCO DS-C9148S-K9 MDS 9148S 16GBPS FC MULTILAYER FABRIC SWITCH 24-ACTIVE PORTS • (2) - POWER CORD
REPLACEMENT or MONEY BACK GUARANTEE:
![https://www.ocdepot.com/template/spacer.gif](https://www.ocdepot.com/template/spacer.gif) When you receive a Guaranteed item from OC Depot, it should perform as described. In the rare situation that this is not the case, we will send a replacement upon safe return of the original item within 30 days of receiving the item. If a replacement is not available we will honor the terms of our Money-Back Guarantee.
ADDITIONAL INFORMATION:
![https://www.ocdepot.com/template/spacer.gif](https://www.ocdepot.com/template/spacer.gif) Cisco Nexus Operating System (NX-OS) Software TAC support: http:/www.cisco.com/tac Copyright (c) 2002-2022, Cisco Systems, Inc. All rights reserved. The copyrights to certain works contained in this software are owned by other third parties and used and distributed under license. Certain components of this software are licensed under the GNU General Public License (GPL) version 2.0 or the GNU Lesser General Public License (LGPL) Version 2.1. A copy of each such license is available at http:/www.opensource.org/licenses/gpl-2.0.php and http:/www.opensource.org/licenses/lgpl-2.1.php IRV-MDS-SW01# 2024 Mar 26 13:18:27.318 IRV-MDS-SW01 %PMON-SLOT1-2-PMON_CRIT_INFO : Port Monitor Critical Information: Config download success . 2024 Mar 26 13:18:28.339 IRV-MDS-SW01 %PMON-SLOT1-2-PMON_CRIT_INFO: Port Monitor Critical Information: Policy (slowdrain) activation is successfull .
IRV-MDS-SW01# 2024 Mar 26 13:18:29.291 IRV-MDS-SW01 %PLATFORM-2-PS_OK: Power sup ply 1 ok(Serial number QCS20442MER) 2024 Mar 26 13:18:29.292 IRV-MDS-SW01 %PLATFORM-2-PS_FANOK: Fan in Power supply 1 ok 2024 Mar 26 13:18:29.292 IRV-MDS-SW01 %PLATFORM-2-PS_OK: Power supply 2 ok(Seria l number QCS20442N54) 2024 Mar 26 13:18:29.292 IRV-MDS-SW01 %PLATFORM-2-PS_FANOK: Fan in Power supply 2 ok 2024 Mar 26 13:18:29.293 IRV-MDS-SW01 %PLATFORM-2-FAN_OK: Fan module ok 2024 Mar 26 13:18:29.293 IRV-MDS-SW01 %PLATFORM-2-FAN_OK: Fan module ok 2024 Mar 26 13:18:29.294 IRV-MDS-SW01 %PLATFORM-2-FAN_OK: Fan module ok 2024 Mar 26 13:18:29.294 IRV-MDS-SW01 %PLATFORM-2-FAN_OK: Fan module ok
IRV-MDS-SW01# write erase Warning: This command will erase the startup-configuration. Do you wish to proceed anyway? (y/n) [n] y IRV-MDS-SW01# reload This command will reboot the system. (y/n)? [n] y 2024 Mar 26 13:18:46.191 IRV-MDS-SW01 %PLATFORM-2-PFM_SYSTEM_RESET: Manual syste m restart from Command Line Interface
>> NX7--LC-loader-02.01.18 (Apr 6 2020 - 14:48:38), Build: 02.01.18
CPU0: 8572E, Version: 2.2, (0x80e80022) Core: E500, Version: 3.0, (0x80210030) Clock Configuration: CPU:1066.672 MHz, CCB:533.336 MHz, DDR:330 MHz (660 MT/s data rate) (Asynchronous), LBC:33.334 MHz L1: D-cache 32 kB enabled I-cache 32 kB enabled Board: 9046, IOFPGA: 0x0000001F, SPROM: 0xAB Boot flash : Primary I2C: ready DRAM: Initializing DDR: 4 GB Skipping PCIe controller reset FPGA asic init done L2: 1024 KB enabled Using default environment
PCIE2 connected to Slot 1 as Root Complex (base address ff709000) Scanning PCI bus 01 PCIE2 on bus 00 - 03 In: serial Out: serial Err: serial Net: INFO: Net boot mode = 1 INFO: Net boot mode = 1 INFO: Board will come up MGMT interface INFO: MAC address is: 2c:5a:0f:a2:75:d0 eTSEC2 board phy 3 INFO: Net boot mode = 1 eTSEC2 USB: USB0: USB EHCI 1.00 scanning bus 0 for devices... 1 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found IDE: Bus 0: OK Device 0: Model: SSFD4GHYB9P1D001 Firm: FW981 Ser#: STP20470E4J Type: Hard Disk Capacity: 3907.9 MB = 3.8 GB (8003520 x 512)
Booting image bootflash://m9100-s5ek9-kickstart-mz.8.4.2d.bin ................ ................................................................................ ....................................... 26390016 bytes read NBI at 08000000 size 134217728
Booting image at addr 0x00800000 ... Memory <- <0x0 0x0 0x1 0x0> (4096MB) ethernet0: local-mac-address <- 2c:5a:0f:a2:75:d0 ethernet1: local-mac-address <- 00:e0:0c:00:01:fd ethernet2: local-mac-address <- 00:e0:0c:00:02:fd CPU clock-frequency <- 0x3f941f80 (1067MHz) CPU timebase-frequency <- 0x3f941f8 (67MHz) CPU bus-frequency <- 0x1fca0fc0 (533MHz)
zImage starting: loaded at 0x00800000 (sp: 0x7fedc4c0) Allocating 0x60dca8 bytes for kernel ... gunzipping (0x00000000 <- 0x00818000:0x00de2044)...done 0x5b9860 bytes Using loader supplied ramdisk at 0x2800000-0x3e5de00 initrd head: 0x1f8b0808
Linux/PowerPC load: rw root=/dev/ram0 rdbase=0x7000000 card_index=9046 maxcpus=2 ip=off ramdisk_size=262144 noquiet obfl_type_ide=1 kgdboc=ttyS0,9600,B console= ttyS0,9600n8nn loader_ver="02.01.18" card_index=9046 quiet bootdev=ide0 server_i p=171.69.21.28 ksimg=/m9100-s5ek9-kickstart-mz.8.4.2d.bin isanimg=/m9100-s5ek9-m z.8.4.2d.bin Finalizing device tree... flat tree at 0xdef140 setup_arch: bootme m mpc85xx_ds_setup_arch() arch: exit
[ 0.061206] Host controller irq 26 [ 0.104278] Assign root port irq 26 [ 0.144941] Host controller irq 24 [ 0.194703] Assign root port irq 24 [ 0.829049] physmap-flash physmap-flash.0: Could not reserve memory region [ 1.099217] Enabling all PCI devices INIT: Checking all filesystems....r.retval=[0] done. Loading system software Uncompressing system image: bootflash:////m9100-s5ek9-mz.8.4.2d.bin CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC Load plugins that defined in image conf: /isan/plugin_img/img.conf Inband ip 127.1.1.1 No cmdline specified pboot_cb_init: MAX_ALLOWED_VDC= 2 Extract srg from /isan/plugin_img/core_plugin swid-core-s5ek9m maps to plugin id 0 No Patching support on this platform Loading plugin 0: core_plugin... No Patching support on this platform Enter pboot_chk_compatibility num srgs 1 0: swid-core-s5ek9m, swid-core-s5ek9m num srgs 1 0: swid-sup-mini-ks, swid-sup-mini-ks INIT: Entering runlevel: 3
2024 Mar 26 20:22:19 %SYSLOG-2-SYSTEM_MSG : Syslogs wont be logged into logflas h until logflash is online 2024 Mar 26 20:22:22 %KERN-0-SYSTEM_MSG: [ 1.099217] Enabling all PCI device s - kernel 2024 Mar 26 20:23:16 switch %CARDCLIENT-2-REG: OK
Abort Auto Provisioning and continue with normal setup ?(yes/no)[n]: Starting Auto Provisioning...Done
Abort Auto Provisioning and continue with normal setup ?(yes/no)[n]:
Abort Auto Provisioning and continue with normal setup ?(yes/no)[n]: 2024 Mar 26 20:23:38 switch %POAP-2-POAP_INITED: POAP process initialized
Abort Auto Provisioning and continue with normal setup ?(yes/no)[n]: 2024 Mar 26 20:23:45 switch %PMON-SLOT1-2-PMON_CRIT_INFO: Port Monitor Critical Information : Config download success . 2024 Mar 26 20:23:46 switch %PMON-SLOT1-2-PMON_CRIT_INFO: Port Monitor Critical Information: Policy (slowdrain) activation is successfull . 2024 Mar 26 20:23:47 switch %PLATFORM-2-PS_OK: Power supply 1 ok(Serial number Q CS20442MER) 2024 Mar 26 20:23:47 switch %PLATFORM-2-PS_FANOK: Fan in Power supply 1 ok 2024 Mar 26 20:23:47 switch %PLATFORM-2-PS_OK: Power supply 2 ok(Serial number Q CS20442N54) 2024 Mar 26 20:23:47 switch %PLATFORM-2-PS_FANOK: Fan in Power supply 2 ok 2024 Mar 26 20:23:47 switch %PLATFORM-2-FAN_OK: Fan module ok 2024 Mar 26 20:23:47 switch %PLATFORM-2-FAN_OK: Fan module ok 2024 Mar 26 20:23:47 switch %PLATFORM-2-FAN_OK: Fan module ok 2024 Mar 26 20:23:47 switch %PLATFORM-2-FAN_OK: Fan module ok
Abort Auto Provisioning and continue with normal setup ?(yes/no)[n]: 2024 Mar 26 20:23:49 switch %POAP-2-POAP_INFO: USB disk not detected 2024 Mar 26 20:23:49 switch %POAP-2-POAP_INFO: Start DHCP v4 session 2024 Mar 26 20:23:49 switch %POAP-2-POAP_DHCP_DISCOVER_START: POAP DHCP Discover phase started 2024 Mar 26 20:23:49 switch %POAP-2-POAP_INFO: Abort Power On Auto Provisioning and continue with normal setup? (yes/no)[n]: n
Abort Auto Provisioning and continue with normal setup ?(yes/no)[n]: n
Abort Auto Provisioning and continue with normal setup ?(yes/no)[n]: y 2024 Mar 26 20:23:56 switch %USER-2-SYSTEM_MSG: Restoring all ports to default s tate, please wait ... - poap 2024 Mar 26 20:23:56 switch %USER-2-SYSTEM_MSG: POAP restore to default finished . - poap 2024 Mar 26 20:23:56 switch %POAP-2-POAP_FAILURE: POAP DHCP discover phase faile d 2024 Mar 26 20:23:58 switch %POAP-2-POAP_INFO: Abort Power On Auto Provisioning and continue with normal setup? (yes/no)[n]: 2024 Mar 26 20:23:59 switch %POAP-2-POAP_INFO: USB disk not detected
---- System Admin Account Setup ----
Do you want to enforce secure password standard (yes/no) [y]: n
Enter the password for "admin": Confirm the password for "admin":
---- Basic System Configuration Dialog ----
This setup utility will guide you through the basic configuration of the system. Setup configures only enough connectivity for management of the system.
Please register Cisco MDS 9000 Family devices promptly with your supplier. Failure to register may affect response times for initial service calls. MDS devices must be registered to receive entitled support services.
Press Enter at anytime to skip a dialog. Use ctrl-c at anytime to skip the remaining dialogs.
Would you like to enter the basic configuration dialog (yes/no): n
User Access Verification 10.100.254.26 login: admin Password:
Cisco Nexus Operating System (NX-OS) Software TAC support: http:/www.cisco.com/tac Copyright (c) 2002-2022, Cisco Systems, Inc. All rights reserved. The copyrights to certain works contained in this software are owned by other third parties and used and distributed under license. Certain components of this software are licensed under the GNU General Public License (GPL) version 2.0 or the GNU Lesser General Public License (LGPL) Version 2.1. A copy of each such license is available at http:/www.opensource.org/licenses/gpl-2.0.php and http:/www.opensource.org/licenses/lgpl-2.1.php switch# show version Cisco Nexus Operating System (NX-OS) Software TAC support: http:/www.cisco.com/tac Documents: http:/www.cisco.com/en/US/products/ps9372/tsd_products_support_serie
s_home.html --More-- Copyright (c) 2002-2022, Cisco Systems, Inc. All rights reserved. The copyrights to certain works contained herein are owned by other third parties and are used and distributed under license. --More-- Some parts of this software are covered under the GNU Public License. A copy of the license is available at --More-- http:/www.gnu.org/licenses/gpl.html.
Software BIOS: version 2.1.18 loader: version N/A --More-- kickstart: version 8.4(2d) system: version 8.4(2d) BIOS compile time: 04/06/20 kickstart image file is: bootflash:///m9100-s5ek9-kickstart-mz.8.4.2d.bin kickstart compile time: 3/15/2022 12:00:00 [02/10/2022 17:44:25] system image file is: bootflash:///m9100-s5ek9-mz.8.4.2d.bin system compile time: 3/15/2022 12:00:00 [02/10/2022 19:08:13]
Hardware cisco MDS 9148S 16G 48 FC (1 Slot) Chassis ("2/4/8/16 Gbps FC/Supervisor") Motorola, e500v2 with 4088624 kB of memory. Processor Board ID JAE21010BK0
Device name: switch bootflash: 4001760 kB
Kernel uptime is 0 day(s), 0 hour(s), 3 minute(s), 54 second(s)
Last reset at 383551 usecs after Tue Mar 26 20:19:54 2024 Reason: Reset Requested by CLI command reload System version: 8.4(2d) Service:
plugin Core Plugin switch# switch# switch# show license license_JPG210100BV_13.lic: SERVER this_host ANY VENDOR cisco INCREMENT PORT_ACTIV_9148S_PKG cisco 1.0 permanent 12 VENDOR_STRING=MDS HOSTID=VDH=JPG210100BV NOTICE=201702171026081 >DS-C9148S-K9JPG210100BV SIGN=B0AA90602F44
switch# show license usage Feature Ins Lic Status Expiry Date Comments Count --------------------------------------------------------------------------------
FM_SERVER_PKG No - Unused - ENTERPRISE_PKG No - Unused - PORT_ACTIV_9148S_PKG Yes 24 In use never - --------------------------------------------------------------------------------
switch#
|
![SearchBy<#field ItemNumber/> at <#field storeSection/><#attributes><#field AttrName/> <#field AttrValue/> <#/attributes>](https://www.ocdepot.com/template/Rounded_Middle_Right.gif) |
![SearchBy<#field ItemNumber/> at <#field storeSection/><#attributes><#field AttrName/> <#field AttrValue/> <#/attributes>](https://www.ocdepot.com/template/Rounded_Left_Bottom.gif) |
![SearchBy<#field ItemNumber/> at <#field storeSection/><#attributes><#field AttrName/> <#field AttrValue/> <#/attributes>](https://www.ocdepot.com/template/Rounded_Middle_Bottom.gif) |
![SearchBy<#field ItemNumber/> at <#field storeSection/><#attributes><#field AttrName/> <#field AttrValue/> <#/attributes>](https://www.ocdepot.com/template/Rounded_Right_Bottom.gif) |
SearchBy37 - 259511 | Loc: F76 | L: Mitchell | T: | PM: Nick | QTY: 0 | Plan: L1- Q2 5 pounds or more | 22.00"x21.00"x5.00" 30.00lbs | Start: $0.00 | BIN: $99.99 | | 2024-03-27 | | 58319 |