feature:
is an open source 2.4 GHz wireless development platform for Bluetooth experimentation.
Based on the powerful ARM Cortex-M3 LPC175x microcontroller and full-speed USB 2.0, the is an excellent way to develop a class 1 custom Bluetooth device of its kind.
The entire board is only two and a half inches long, with a USB-A connector on end and an RP-SMA connector on the other.
The difference between and other Bluetooth development platforms is that it can not only send and receive 2.4GHz signals, but also work in listening mode to monitor Bluetooth traffic in real time. This mode of operation has existed in low-cost WiFi modules for many years and has been widely used in research, development, and security audits, but so far, the Bluetooth standard has not had such a solution.
Also, since it is an open source platform (software and hardware), schematics and are readily available for all your hacking needs.
Specification:
2.4GHz transmit and receive.
Transmit power and receive sensitivity are comparable to Class 1 Bluetooth devices.
Standard Cortex debug connector (10-pin 50K JTAG).
In-System Programming (ISP) Serial Connector
Expansion connector designed for communication between Ubertooth or other future uses.
Six LED indicators
2.4 GHz duck antenna included
Note: To open the schematic and board design files in the source package, you need to download the KiCad tab, the open source electronic design automation package.
Dimensions: 61.75 mm x 19 mm (2.43 x 0.75 in)
Package list:
1* 2.4GHz open source test and research tool
1* Dual Band WiFi Antenna
notes:
1. Due to manual measurement, please allow 1-3mm error.
2. Due to the difference of different monitors, the picture may not reflect the actual color of the item. Thanks!
Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.
We only ship to confirmed ebay Order addresses. Please comfirm that your Order address is in line with your shipping address.
Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size.
It takes about 7-15 working days to Australia; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance.
We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via "Ask seller a question" . We will reply your email within 24 working hours.