SPEC
Body: Ash
Neck Material : Maple
Neck Shape : U
Neck Warp : No
Fingerboard Material : Rosewood (20F)
String Height : 12F treble - bass : 2.2mm-2.6mm
Fret remainder : 90
Inlay : Dot
Nut (wood/width) : approx. 40mm
Pegs : GROVER
Scale : 864mm
Bridge : BABICZ
String Gauge : .045-.105
Pickguard : Tortoiseshell pattern
Pickup : humbucker
Switch : 1Vol (coil-tap at PULL), 1Tone
Controls : 2Vol (pull to coil tap), 1Tone
Rod Remaining : Enough room to loosen both
Weight : Approx. 3.84kg
Accessories : Genuine hard case, Adjustment wrench
Serial No. 108531377
The EB BASS is a series of basses developed by Gibson in recent years.
Wood materials: ash body, maple neck, and rose fingerboard.
This is one of the original body shape but includes Gibson's unique design.
Humbucker pickups for powerful bass sound with thick low-end figure.
Original hard case is included.
Specs are a mixture of tradition and innovation.
Ash body, maple neck, and rosewood fingerboard.
The body is made of ash, neck is made of maple, and fingerboard is made of rosewood. 864mm scale, head is angled 2-2, and the neck joint is set neck.
The paint is a matte finish that gives the feel of wood.
The bridge is made by Babicz. The bottom of the pieces of the BABICZ bridge adheres to the full surface of the plate, resulting in less vibration loss and longer sustain.
The sound is fat, powerful, and with a sense of loss in the mid-high range.
The pickups are original humbuckers.
The pickups are original humbuckers with a fat and powerful sound. The sound is thicker and more powerful than other Gobson bass models, and has more mid-high range definition and a sense of loss,
The sound is practical even when slapping.
2Vol, 1Tone control. When the Vol knob is set to PULL, the coil tap function is turned on, producing a pseudo-single sound.
This produces a pseudo-single sound. There is no sudden change in volume when tapping from hum to single.
Condition.
Condition: The neck is almost straight.
There are scratches from use and tarnishing of metal parts due to age.
The strings are .045-.045 and the sound is fine.
The strings are .045-.105 gauge and have been tuned.
There is plenty of room to adjust the neck both tightening and loosening the remaining rod.
The neck has been adjusted to an almost flat condition.
String height is approx. 2.2mm on the 1st string and approx. 2.6mm on the 4th string at the 12th fret.
The accessories are a genuine hard case and a wrench for adjustment. Warranty and instruction manual are not included.