eBay

Wifi 3-Phase Clamp Meter, Smart Home Energy Monitor with 3 80A Circuit Level Sensors | Real Time Electricity Monitor/Meter

APPLIANCE MONITORING: Comes with three 80A sensors to accurately monitor your air conditioner, furnace, water heater, washer, dryer etc. Support linkage with other tuya.
ENERGY MONITORING: Monitor your home's real power anywhere, anytime to prevent costly repairs, conserve energy, and save costs. measure Voltage, Current, PowerFactor.
REAL-TIME ENERGY DATA: Only support 2.4 GHz WIFI with an internet connection to monitor energy use with phone app. Provide 2-second data and are accurate from±2%.
EASY TO USE: Lightweight and easy to install,PC321-TY Power Clamp helps you monitor the amount of electricity usage in your facility by connecting the clamp on to the power cable.install 'SmartLife' APP. 80A (optional): 10mm.
IMPORTANT SAFETY INFORMATION:The power clamp must be installed and serviced only by a qualified ,Do not touch the terminals of the device during testing and turn off all the power supply for this equipment before installing.Keep you safe.

Product Description

WiFi Smart Energy Meter,take command of your energy use.

For 80A-300A CT item, Real time monitor total current, power and KWh , and also show A, B, C each phase voltage , current, power and KWh consumption

For 80A-300A CT item, electric stastic , it can record hourly ,daily,monthly and yearly power consumped KWh value for Total and each phase separately.

The Power Clamp has a mounting bracket for mounting purposes.

1. Use the mounting bracket as template to mark the two holes on the wall for installing screws.

2. Screw the mounting bracket onto the wall according to marked location. Install wall plugs if necessary.

3. Locate the hooks of the mounting bracket and line up the hooks with the mounting holes on the Power Clamp. Fit the hooks into the mounting holes as the picture below. Installation is now completed.

Attach both ends of the Current Transformer Cables first like the picture shown below. Then spinning the waterproof latch clockwise until both ends have been tightened and secured.

Open the clamp as shown below. Apply it on the electric meter cable. The arrow on the clamp should face to the correct direction of the electricity current flows (P1→P2or K→L). If the arrow faces the reverse direction, the reading meter will display 0.

Technical Specifications

Wi-Fi	802.11 B/G/N20/N40
RF Characteristics	Operating frequency: 2.4GHz
Operating Voltage	100~240 Vac 50/60 Hz
Calibrated Metering Accuracy	• ≤ 100W ( Within ±2W ) • >100W ( Within ±2% )
CT Provided	CT 80A (default) • CT 120A/200A/300A(optional)
Operating environment	Temperature: -20 ℃~ +55 ℃ • Humidity: ≤ 90% non-condensing
Dimension	86(L) x 86(W) x 37(H) mm

Item model number	321-80A
Part Number	321-80A
Style	321-80A
Power Source	Ac
Product Dimensions	8.27 x 5.51 x 2.28 inches
Country of Origin	China
Batteries Required?	No
Item Weight	1.25 pounds
Batteries Included?	No
Voltage	240 Volts
Item Dimensions LxWxH	8.27 x 5.51 x 2.28 inches
Is Discontinued By Manufacturer	No

Shipping

Fast shipping is very important for us.

Our standard US shipping service is FREE.

Your order will be shipped within 2-3 business days upon full payment received.

Your order will be delivered within 2-3 business days after the handling time.

We only ship to the confirmed PayPal address. We reserve the right to cancel any order for any reason at any time.

We are not responsible for undeliverable addresses.

Returns and payment

We offer a 30 days return policy from checkout winning date.

We allow only PayPal as payment method

FeedBack

Your feedback very important to us, after you get your package and you are satisfied with our service please leave us positive feedback

If you have any problem with your order / any questions please before leave any type of feedback

For any questions, using eBay contact system