ART AR Tee Mike Preamplifier TUBE MP Studio V3 [Domestic regular import]

explanation Product introduction TUBE MP Studio V3 is based on Tube MP VU meter, limiter, and model with V3 circuit. As a result, not the vocal microphone Settings according to the guitar, bass, and keyboard can be easily obtained. [V3 circuit (Variable Valve Voicing)] The V3 circuit is a circuit that gives the optimal characteristics according to the input sound source. Vocals, guitars, bass, keyboards, percussions, etc. There are 16 kinds of presets for various input sources. These are preset by professional engineers. You can easily get a professional sound just by turning the knob. [Explanation of preset] neutral It is a faithful and transparent setting to the original sound. Flat: Neutral Flat Vovcal: Neutral Vocal (Mike) Guitar: Neutral Guitar Bass: Neutral Base Guitar Warm It is a setting with warmth unique to a vacuum tube. E-KBD: Warm Electric Keyboard E-GTR: Warm Electric Guitar Vocal: Warm Vocal Mike Valve: Warm Valve Warm+OPL Effective for signals with high sound pressure and large peak signals, It is a warm setting with the limiter. Multi: Multi Warm Sound+OPL VOCAL: Vocal Warm+Opl A-Ctr: Acoustic Guitar Warm+Opl Piano: Piano Warm+OPL Neutral+OPL High sound pressure signals such as closed microphones The effective limiter is effective for the large peak signal, And a natural sound setting. BASS: Neutral Base Guitar+OPL A-GTR: Neutral Acoustic Guitar+Opl Perc: Nutral Percussion+OPL Limit: Newtra Remit [Tube preamplifier part] 12ax7 I am using a vacuum tube. The maximum gain of the total is 70db, You can handle any microphone. Input/output is an equilibrium XLR non -equilibrium 1/4 inch phone I have The output can output XLR and phones at the same time. Control is input output +20db gain switch +48V Phantom power switch Phase anti -switch is. The input gain is+6 ~+40db+26 ~+60dB due to+20dB gain switch It will be. LED The LED that displays clipping is When the signal is overwhelmed, it changes from green to red. OPL circuit The limiter accurately controls the output peak signal ART's unique OPL output protection limiter. The OPL circuit controls the output level, Hard disk recorders, etc. Protect the next device to be connected from the clip by input over. VU meter The VU meter not only monitors the output level, but The operating status of the OPL circuit is also reflected. For example, even if the meter is swinging to the red zone When the OPL circuit is ON, the meter depends on the OPL circuit. To show the attenuated level In fact, the needle does not swing to the red zone. [Features] V3 circuit OPL output protection Limiter Input that can input directly high impedance input input carefully selected vacuum tube 12AX7 Use VU meter equipped phantom power supply Dimensions: 127H x 140W x 51Hmm Weight: 681G INPUT CONNECTIONS: XLR (Balanced), 1/4inch TS OUTPUT CONNECTIONS: XLR (Balanced) Edance XLR, 1/4inch: 2k OHMS, 840K OHMS Output Impedance XLR, 1/4inch: 600 OHMS, 3000hms Maximum Input Level, XLR: +14dbu Maximum Input Level +28dbu maximum output Level, 1/4inch: +22dbu CMRR: > 75DB (Typical @ i KHz) Frequency Response: 10Hz to 30kHz, +/-. Ypical) Maximum Gain XLR to XLR: 70db (Typical) 1/4inch to 1/4inch: 54db (Typical) XLR TO 1/4inch (Typical) 1/4inch to XLR: 60DB (Typical) Equivalent Input NOISE (Ein): XLR TO XLR: -129dbu ( A Weighted) 1/4inch to 1/4inch: -105dbu (A Weighted) Tube Type: 12AX7A, Dual Triode, Hand Selected Power Requirements: 9VAC @ 0.8a (Typ.) Please be careful (exemption)> Please be sure to read * Please note that parallel imports cannot be supported by Nippon Electro Hermonix. 12AX7 Mike preamplifier equipped with a vacuum tube. Equipped with 16 types of presets tailored to various purposes. Limiter function. This product is an imported product, so there may be a box crush, but there is no problem with the product. Return/exchange cannot be made due to box crushing. Domestic regular imports. A warranty card that is valid for one year from the date of purchase is included. Even after the free warranty period has passed, you can receive support by a regular agency.

Shipping

Except for pre-ordered items, we usually ship within 3 business days after payment confirmation. We can ship your items together. All items are shipped from Japan via the following express carriers: DHL, FedEx, UPS, EMS, ACI. Delivery typically takes 1 to 4 business days after shipment. As this is international shipping, please allow up to 3 business days for us to prepare and reinforce the packaging.

Please check "Shipping & Payment" for shipping costs.

We always ship with a tracking number, so you can order without worrying about delivery times. You can track the shipping status at any time. Shipping is only possible to the address registered on eBay. If you wish to ship to a different address, please change your address on eBay before ordering.

Terms of Sale

Returns and refunds are accepted within 30 days of the shipping date.

Please note that shipping costs, insurance, and handling fees are non-refundable.

Attention International Buyers

Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check eBay's policy for more details. Please note that we do not accept returns for issues related to the above.