Dent Repair Kit : - Professional Dent Removel Repair Tools Kits - Perfect for Car Body hail damge dent and door ding repair removal,Save your money and time to go the repair shop.
- Easy To Control-DIY - can removal the dent by yourself,Suitable for any person to operate,It has the advantages of simple operation,repair the dent for you directly.
- Can Be Widey Use - Our Tool is suitable for the sheet metal processing of automobile,refrigerator,and washing machine,etc.Come with many different sizes puller gasket for repairing different size dents;Perfect for door dings and hail damage.
- No residual glue - Clean car dents first. The heating time of the glue gun is 3-5 minutes. The glue must be fully melted and heated to blister. and the glue should be fully coated with the pull gasket.At this time, the adhesion the viscosity and dent repair effect will be the best.After fixing the dent,Heat up the glue for 30 seconds with hot water. then use alcohol to clean the extra glue on the car.
How To Repair Dents ? - 1.Clean Dent Surface
- 2.Put the glue sticks to gun and heat, connect the power source and preheat for 3-5 minutes.
- 3.According to the dent size to choose the Glue Puller Tab, then put the heated glue on puller tab, immediately place puller tab in the center of the dent and hold on until it sticks.
- 4.Let the glue cool for 2-4 minutes.
- 5.After the glue cooling, use a golden dent lifter or bridge dent puller to align and press the puller to pull up the dent. Repeat the above steps until the dent disappear.
- 6.After finishing the dent,use the alcohol to clean the glue which on the car and the puller tabs.
- Package list:
- 1x Dent Lifter
- 1x Bridge-Shape Dent Puller(with 6 pulling tabs)
- 1x 2 in 1 Large Slide Hamer
- 1x Glue Gun (US plug 100W)
- 10x Glue Sticks
- 1 Set of Puliing Tabs
- 1x Rubber Hammer
- 9x Tap Down Heads
- 1x Plastic Spatula
- 1x Cleaning Cloth
- 1x Empty Bottle(For alcohol)
- 1x Tool Bag
|
|
