Specifications:

Adjustable frequency: 5MHz-55MHz for sending and receiving

VSWR less than 1.5 at 7MHz/10MHz/14MHz/21MHz

Power: 20W(Applicable power within 30W)

FM 76mhz-108mhz reception

Can receive UHF VHF frequencies. With transmitting assistance funciton

 Adjust frequency via its knob; and the band switch selects the short-wave high and low bands

Stretched size 140cm/55.1" (including tuner). Made of stainless steel

Unstretched size around 30cm/11.8" (including tuner). Tuner size 10*3*3cm/3.9*1.2*1.2" (LxWxT)

Top with M4 male connector. Output M male or BNC male connector

1. How to use:

The knob above is the band switch for each frequency. The lower knob fine-tunes the frequency chirp point. The upper outer ring 11 and the inner ring 50 represent the general position of 11-50MHz. 8 and FM means that both 8Mhz and FM bands can use this position. And so on below. Then select the knob below to fine-tune to find the best standing wave. It is recommended to link the talent to check the chirp point.

2. Expand the usage method:

Remove the rod antenna. Connect a 20m long cable. The long line is elevated or the roof is erected. The tuning method is the same as above. The emission efficiency will be increased several times. This method can be used as an alternative to telescopic antennas.

Package Included:

1*Tuner

1*Antenna

1*Adapter