Rode NT1 Professional Condenser Microphone Studio Recording Kit w/ AI-1
LARGE DIAPHRAGM CARDIOID CONDENSER MICROPHONE STUDIO RECORDING KIT
Featuring not only the peerless NT1 large diaphagm condenser mic, associated shock mount and pop shield, but it also comes complete with Rode’s first ever audio interface – The AI-1! For the time being, this audio interface is available only as part of this Studio Kit, so be sure to take advantage of the bundle today!
Industry Standard Mic:
Based on the legendary NT1A, the Rode NT1 fuses the sound of vintage mics with a modern, low-noise design to deliver impeccable sound quality and clarity. This mic is a superb all-rounder, with warm mid range, smooth low end, and crispy detailed high frequency response that remains balanced with minimal vibration thanks to the included shock-mount and pop filter.
For a simple, high quality, easy to use cardioid condenser microphone which is able to record a variety of sounds at studio or broadcast level, the RODE NT1 is an excellent choice. A studio microphone with a variety of uses, the NT1 will be at home in any professional booth. The NT1 is also great with home computer recording setups and is an excellent choice for podcasters looking for a crisp, clear recording.
Brand New Audio Interface:
A first for Rode, the AI-1 USB Audio Interface provides you with studio-quality input and output capabilities to your home studio setup. Featuring a high-quality Neutrik combo jack input, discrete Class-A preamp, and a high-quality headphone preamp, the AI-1 sound card can connect either a mic, guitar or line level instrument to your DAW with an audio quality that perfectly matches the NT1 mic.
The NT1 and AI-1 kit is everything you need for a quality recording setup at a great budget.
Features
Package Includes:
- NT1 large-diaphragm Condenser Mic
- AI-1 USB Audio Interface
- SMR Shock Mount and Pop Shield
- 20 ft XLR Cable
- USB Cable
Specifications
- Computer Connectivity: USB
- Form Factor: Desktop
- Simultaneous I/O: 1 x 2
- Number of Preamps: 1
- Phantom Power: Yes
- Bit Depth: 24-bit
- Sample Rates:
- 44.1 kHz
- 48 kHz
- 88.2 kHz
- 96 kHz
- Analog Inputs: 1 x Neutrik XLR-1/4” combo
- Analog Outputs:
- 2 x 1/4” (impedance balanced)
- 1 x 1/4” (headphones)
- Direct Monitor: Yes
- USB: 1 x USB Type C
- Bus Powered: Yes
- OS Requirements
- Mac OS 10.10 or later
- Windows 7 or later
- Power: USB bus-powered
- Depth:
- 100mm total (with knobs)
- chassis: 88mm
- Width: 124mm
- Height: 38mm
- Weight: 1lb 3.7oz (560g)
- XLR/MIC INPUT
- Dynamic Range: 104dBA
- Equivalent Input Noise @ Maximum Gain (Source Impedance 150 ohms, 20Hz-20kHz, A-weighted): –128dBA
- Frequency Response (Measured after ADC): 20Hz – 20kHz better than ±1dB
- Gain Range: 0dB – >45dB
- Input Impedance: 1.3k Ohms
- INSTRUMENT INPUT
- Dynamic Range: 99dBA
- Frequency Response (Measured after ADC): 20Hz – 20kHz better than ±1dB
- Gain Range: 0dB – >45dB
- Input Impedance: 900k Ohms
- MONITOR OUTPUTS
- Maximum Output Level: -6dBu
- Frequency Response: 20Hz – 20kHz better than ±1dB
- HEADPHONE
- Max output power at 1% THD: 32Ohms – >210mW, 300Ohms – >390mW