Product Description
2PCS 12/24 50A Solar Charge Controller Panel Battery Regulator Dual USB
Specification
Material: Plastic
Model: PVSC30A/PVSC50A/PVSC70A(Currents as indicated by the title)
Voltage: 12/24V
Current: 50A
Max.pv voltage: 50V
USB Output: 2.4A *2
Over Charge Current(V): 13.7V/*2 24V
Over Discharge Current(V): 10.5-11V/*2 24V
Temperature Compensation: -3mv/℃/cell
Empty Load Wastage: <45mA
Loop Voltage Drop: <200mv
Display: LCD Display
Size: 17.5 * 14 * 3.5cm(30A), 21 * 19.2 * 4cm(50A), 22.6*20*4.8cm(70A)
Features:
LCD Display
PWM Battery charging
All necessary protections equipped.
With 12/24V automatically adapt.
The control parameters can be adjusted to a variety of battery parameters work,easy to adapt to different characteristics
of the battery.
The load control mode can be selected, the timer function can be reset for street light at night.
Overcurrent,short circuit,automatic recovery after protections.
Has a strong charge,constant current,floating three intelligent control.
Accurate temperature compensation, correcting the charging and discharging voltage automatically, improving the battery lifetime.
Note:
The machine can only be used in LEAD-ACID Battery.
50A 70A controller will display PV and load parameters, which is not available in 30A
This product is a simple controller, the price is cheap, not high-end multifunctional controller, please think twice before purchase!The product doesn't have communication interface temporarily,
Package included:
2 x Solar Charge Controller(Currents as indicated by the title)
USE INSTRUCTIONS
1. The function of the controller is to protect voltage overshoot and overplay.
2. When the battery voltage is too low, the controller stops the output; after the solar panel is charged, the cell recovers to 12.6V.
3. 12.6V is the recovery discharge voltage.
4. The normal voltage of the controller is 10.7V to 13.7V. These two voltage fluctuations can be set manually.
If you have trouble in use, try adjusting the float voltage to 13.7V:
First, you need to press the MCU control button for about 3-4 seconds, and then there will be a management interface on the screen.
Second, you must press the add button on the screen until the voltage reaches 13.7V.
Finally, you need to press the MCU control button again, which will save the controller record data when the display does not flicker.
About Item
All items sold by us are being described to the best of our abilities, as accurate as possible, and with utmost conscientiousness on our part.
However, to avoid any potential oversights, I respectfully request your assistance in helping us to make this a mutually satisfactory transaction by THOROUGHLY reviewing item description and photos, and asking all questions PRIOR TO BIDDING.
Customer Satisfactory
1.We back our commitment with superb service, 100% full money back and a customer satisfaction guarantee.
2.I am here and ready to assist you with any questions or concerns you might have before or after the purchase.
3.My goal is to make sure you are a happy customer and pleasant shopping with us.
Feedback
If you are satisfied with the purchase and our total service, your comment is very important in our business success. Please take a minute to leave us a positive feedback with an overall Detailed Selling Rating (DSR) of 5.
Our eBay account setup auto feedback, so eBay system gives you automatically Positive feedback back after your positive feedback left.
If you plan to give us a neutral/negative feedback Or open ebay/paypal case, please write to us immediately so that we can do our best to resolve your problem.
We stand behind everything that we sell and will do everything possible to assure you are satisfied.
When you receive your purchase if you are not 100% satisfied, please sent me ebay message and we will do our best to make you happy. If you still want to return your purchase, simply ship the item(s) back to us and we will refund your original purchase price and the original shipping charge.
Buyers are responsible for the postal cost of returning the items.
We must be notified of the intent to return your item within 30 days of receiving the item.
Items returned must be in the same condition that they were received.
How to return
1,Please ask us for return address .
2,Shipping back the package .
The RMA#(Return Merchant Authorization Number = Your ebay ID) must be clearly written on the return package ,Otherwise the package will be refused.
3,Sent us the return tracking number.
4,All returns will be inspected prior to a credit being issued.
1:Returns are accepted within 60 days of purchase.
2:All returned items MUST BE in the original packaging.
3:We will be happy to assist you if if any item needs to be returned or replaced
4:Please don't open a return request before contacting us first to solve, many thanks.