LG Art Cool Gallery Wall Mounted 4-Zone LGRED° Heat System System - 48,000 BTU Outdoor - 12k + 12k + 12k + 12k Indoor - 20.5 SEER2

LG Art Cool Gallery Wall Mounted 4-Zone LGRED° Heat System System - 48,000 BTU Outdoor - 12k + 12k + 12k + 12k Indoor - 20.5 SEER2

Item Description

Integrated Base Pan Heater

Integrated Base Pan Heater

  • Base pan heaters come factory installed on all LGRED° outdoor condensers in order to mitigate the risk of damage caused by freezing condensate.
  • Base pan heaters come factory installed on all LGRED° outdoor condensers in order to mitigate the risk of damage caused by freezing condensate.

Inverter Technology

Inverter Technology

  • LG's outdoor condensers are designed with efficient inverter technology. An electronic expansion valve and a variable speed compressor carefully regulate the refrigerant flow, reducing energy consumption and allowing for consistent, accurate temperatures.
  • LG's outdoor condensers are designed with efficient inverter technology. An electronic expansion valve and a variable speed compressor carefully regulate the refrigerant flow, reducing energy consumption and allowing for consistent, accurate temperatures.

Gold Fin Protection

Gold Fin Protection

  • To ensure the reliability and longevity of the LMU480HHV's heat exchanger, LG employs a Gold Fin coating that prevents corrosion and improves durability.
  • To ensure the reliability and longevity of the LMU480HHV's heat exchanger, LG employs a Gold Fin coating that prevents corrosion and improves durability.

Quiet Design

Quiet Design

  • Thanks to brushless fan motors, both the outdoor and indoor units in this system produce less mechanical and electrical noise. The indoor units feature a cross flow fan design that further reduces noise by restricting the surface pressure of airflow.
  • Thanks to brushless fan motors, both the outdoor and indoor units in this system produce less mechanical and electrical noise. The indoor units feature a cross flow fan design that further reduces noise by restricting the surface pressure of airflow.

Air Flow Options

Air Flow Options

  • These LG units give you two options for automating air flow. In swing mode, a unit will rotate through all four air flow directions. Chaos Wind mode cycles both air flow direction and fan speed to provide a natural circulation pattern.
  • These LG units give you two options for automating air flow. In swing mode, a unit will rotate through all four air flow directions. Chaos Wind mode cycles both air flow direction and fan speed to provide a natural circulation pattern.

Self-Cleaning Coil

Self-Cleaning Coil

  • These wall mounted indoor units feature self-cleaning heat exchanger coils that automatically remove dirt and moisture. This helps to prevent unpleasant odors and to combat the formation of mold.
  • These wall mounted indoor units feature self-cleaning heat exchanger coils that automatically remove dirt and moisture. This helps to prevent unpleasant odors and to combat the formation of mold.

Jet Temperature Control

Jet Temperature Control

  • Quickly get your zone comfortable with the Jet Heat and Jet Cool modes available with these indoor units. With the press of a button, your system will temporarily adjust the set point and fan speed of a unit to provide rapid zoned heating or cooling.
  • Quickly get your zone comfortable with the Jet Heat and Jet Cool modes available with these indoor units. With the press of a button, your system will temporarily adjust the set point and fan speed of a unit to provide rapid zoned heating or cooling.

Automated Operation

Automated Operation

  • Auto operation mode continually compares your zones' current and desired temperatures and uses that data to intelligently adjust fan speed and refrigerant flow to provide optimal comfort.
  • Auto operation mode continually compares your zones' current and desired temperatures and uses that data to intelligently adjust fan speed and refrigerant flow to provide optimal comfort.

Sleep Mode

Sleep Mode

  • With the sleep mode and timer functions, you can set the indoor units to save energy at night. Sleep mode will incrementally adjust temperatures for an hour before the timer function automatically deactivates the units.
  • With the sleep mode and timer functions, you can set the indoor units to save energy at night. Sleep mode will incrementally adjust temperatures for an hour before the timer function automatically deactivates the units.

Improved Air Quality

Improved Air Quality

  • LG's wall mounted indoor units keep your air clean with a washable anti-fungal filter. HVT indoor units also include a plasma filter that neutralizes microscopic irritants, while HSV4 units utilize a 3M Micro Protection Filter for optimal air cleaning.
  • LG's wall mounted indoor units keep your air clean with a washable anti-fungal filter. HVT indoor units also include a plasma filter that neutralizes microscopic irritants, while HSV4 units utilize a 3M Micro Protection Filter for optimal air cleaning.

Dehumidify

Dehumidify

  • LG's multi-zone indoor units include a dehumidifying operation mode. In this mode, the units' internal sensors monitor temperature and modify the set point and fan speed to remove moisture from the air.
  • LG's multi-zone indoor units include a dehumidifying operation mode. In this mode, the units' internal sensors monitor temperature and modify the set point and fan speed to remove moisture from the air.

Hot Start

Hot Start

  • When the hot start function is enabled on a mini split indoor unit, the fan will not engage until the outdoor condenser has had the opportunity to warm the indoor coil. This prevents the unit from blowing cold air during heating operations.
  • When the hot start function is enabled on a mini split indoor unit, the fan will not engage until the outdoor condenser has had the opportunity to warm the indoor coil. This prevents the unit from blowing cold air during heating operations.

Recommended line set sizes for indoor unit connectivity:

Recommended line set sizes for indoor unit connectivity:

  • LMAN127HVP: 1/4" x 3/8" Line Set (Qty 4)
  • LMAN127HVP: 1/4" x 3/8" Line Set (Qty 4)

A branch box with a 3/8" x 3/4" line set connection is also required. Additional branch boxes and line sets may be required based on your configuration.

A branch box with a 3/8" x 3/4" line set connection is also required. Additional branch boxes and line sets may be required based on your configuration.

All LG branch boxes systems require a min of 16.4 feet of line set between the condenser and the branch box, from the branch box to the distribution box and from the distribution box to the indoor unit.

All LG branch boxes systems require a min of 16.4 feet of line set between the condenser and the branch box and from the branch box to the indoor unit.

All LG branch boxes systems require a min of 16.4 feet of line set between the condenser and the branch box, from the branch box to the distribution box and from the distribution box to the indoor unit.



Product Notes
Each indoor unit will include any port adapters necessary for multi-zone installation.

This product requires the following accessories for installation:

  • Line Set - This double insulated tubing transfers refrigerant efficiently between your outdoor condenser and indoor units.
  • Branch Box - An LG branch box is required to connect this condenser to LG mini split indoor units.
  • Drain Tubing - Drain tubing facilitates the reliable and effective removal of condensate from your system. It connects your indoor units to drain locations of your choosing.
  • Disconnect Box & Electrical Whip Kit - The Disconnect Box & Whip Kit provides a safe and simple way to connect your outdoor condenser to your fuse box.
  • Connecting Wire - This durable, insulated wire provides power to your indoor units from your outdoor condenser.
  • Base Pan Heater - The base pan heater prevents ice from building up on the outdoor unit. Excessive ice build will lead to performance issues and could damage your unit.
  • Outdoor Condenser Plastic Pad or Wall Bracket - We recommend outdoor condensers should not be placed directly on the ground. An outdoor condenser pad or wall bracket will provide a stable way to mount your condenser free from obstructions and debris.
Adding these accessories to your order will provide a complete, ready-to-install mini split system.

LG products include a 10-year warranty with the requirement that installation is completed by a licensed contractor and that the product is registered at https://lg-dfs-warranty.com/ within 60 days of installation.
All Mini Split Systems require one Primary Mini Split Installation Kit. You may also require one or more Secondary Installation Kits if you have a Multi-Zone system. You will need a Secondary Installation Kit for each additional indoor unit.

Specs 

Product Specs
Overview
Product Category
Mini Split Heat Pump System 
General Information
Type
Wall Mounted 
Product Line
LGRED Heat 
Product Sub-line
Art Cool Gallery 
Product Category
Mini Split Heat Pump System 
Operating Mode
Heating and Cooling 
Number of Zones
4 
Refrigerant Type
R-410A 
Indoor Unit Size(s)
12 + 12 + 12 + 12 
Outdoor Unit Size
48000 BTU
DOE Regional Compliance
Nationwide 
Performance
Cooling Capacity
48000 BTU
Heating Capacity
52500 BTU
Cooling Power Input
3840 Watts
Heating Power Input
4320 Watts
Low Ambient Heating
Yes 
Minimum Outdoor Temperature for Heating
-13 F
Minimum Outdoor Temperature for Cooling
14 F
SEER2
20.5 
EER2
13.1 
HSPF2
10.5 
Dimensions
Product Weight
214 Pounds
Shipping Weight
236 Pounds
Certifications
ETL Listed
Yes 
AHRI Certified
Yes 
AHRI Reference Number
206717002

About Us 

Power Equipment Direct was founded on the premise of simplified shopping.


Customers could sort through all of the leading power equipment products online from the comfort of their homes - no traffic jams, no crowds, no scratched tailgates.


Plus, all of the equipment - including hard-to-find accessories - would ship directly from the factory to the customer's door, eliminating the need for stores, warehouses and clueless clerks.


Power Equipment Direct streamlined the sales process and rewarded customers with factory-direct discounts and a sales tax-free guarantee on its vast selection of products.


Founder Jon Hoch, launched his first web store from his basement in 2003. The goal: To sell one pressure washer a week in order to make a car payment.


Several years and a couple of web stores later, Power Equipment Direct is one of the leading online power equipment e-tailers with millions of dollars in annual sales.


The company owns more than a dozen power equipment-related web addresses and plans to open more specialty superstores in the very near future.











Shipping 

The vast majority of power equipment products are shipped FREE to anywhere in the lower 48 states. Exceptions include some handheld lawn tools. For example, leaf blowers only ship free if they're priced above $249.  The shipping rate charged will be quoted on each listing.


Accessories often ship separately from different manufacturers in different locations so we simply charge standard shipping rates on them.  Smaller items are also available for Next Day Air and Two Day Air for an additional charge dependent on the weight of the item.


Alaska, Hawaii, & US Territories

At this time we only ship to the lower 48 states.  Shipment to Alaska, Hawaii, and any US Territory does not occur.


P.O. boxes & APO/FPO

We cannot ship orders to P.O. boxes or APO/FPO addresses at this time.


** In some cases, items will not be able to be sold to certain states based on active state laws.  Each item which this applies to, will contain information in the respective listing description information.  This information explains that if an item is purchased and the checkout address requests this to be shipped to a state which does not allow this item to be shipped, your transaction will be immediately cancelled and full refund given.  Please review the top of the description you purchase in order to determine if the item and shipping address meet the scenario listed above.  Thank you for your time and understanding regarding this topic.









Returns 

In some rare instances, you may need some help with a return. Don't worry! The following information will help you process your return:


No returned merchandise will be accepted without a Return Material Authorization (RMA). Please call 1-800-710-7499 and speak with a customer solutions representative to obtain a RMA # and shipping instructions. We will credit you in the same manner as your original payment within 10 business days of receiving the returned item.

 
Unopened Merchandise

You may return any "unopened" products and accessories within 30 days of delivery for a full refund. Simply contact our Customer Service team in order to discuss return options for unopened merchandise. Some products include free shipping, so if you return one of these products our actual outbound shipping costs will be deducted from your return refund.  You can contact customer service by calling the following phone number:  1-800-710-7499 or clicking here to send an email.


Opened Merchandise

"Opened" products and accessories can be returned within 30 days of delivery*, but will be subject to a 25% restocking fee to cover testing, cleaning and repackaging expenses. Simply contact our Customer Service team in order to discuss return options for opened merchandise. Some products include free shipping, so if you return one of these products our actual outbound shipping costs will be deducted from your return refund. Opened returns must be in salable condition with original materials and packaging.  You can contact customer service by calling the following phone number: 1-800-710-7499 or clicking here  to send an email.


* Engine powered equipment cannot be returned once it has been gassed or oiled due to federal shipping regulations. If the product has been gassed or oiled, it needs to be taken to an authorized service center for repair which may be covered under warranty.

 
Cancelled Orders

An order that has shipped cannot be cancelled. If you refuse an order which has already been shipped, you will be responsible for both the outbound and return shipping costs which will be deducted from the refund.

 
Damaged Products

You must take the time to inspect the goods before you sign the delivery receipt from the carrier. If you sign the delivery receipt without inspecting the shipment you will be responsible for filing a freight claim and arranging for a repair or return of the damaged goods. Concealed damage claims must be reported immediately.


Suspect Damage

On occasion, the outer carton may look damaged, but the product inside the box is perfectly fine. If you suspect concealed damage, notate "Possible Freight Damage" on the delivery receipt while the driver is present. This way, if you discover later that the product is damaged, the remedy of a freight claim is less of a hassle.

 
Obvious Damage

Do not sign for damaged products. If your product arrives damaged, please (a) REFUSE DELIVERY and (b) Call Us Immediately so we can process the appropriate claims and coordinate an exchange for you.  You can contact us using the following phone number: 1-800-710-7499


Defective Products

We encourage you to test your product within 15 days of receipt so we can quickly remedy any mechanical problems. If you think your product is defective, don't worry.


In most cases, it's a simple issue that can be resolved over the phone. You are also welcome to contact the manufacturer's customer service departments. They have expert technicians standing by to help solve your issue. Please have your model number and serial number available for fastest service.


Engine-powered equipment cannot be returned once it has been gassed or oiled due to federal shipping regulations. If the product has been gassed or oiled, it needs to be taken to an authorized service center for repair which may be covered under warranty.




























Contact 

Feel free to contact us via "Ask Seller a question" and we will respond within 24-48 hours.  Any inquiries submitted on non-business days will be responded to by the next business day.  Customer Service hours of operation are 7am - 7pm CST, Monday - Friday.


Other ways to contact us:


By phone:

phone: 1-800-710-7499




Payment 

We accept PayPal payments during checkout. Immediate payment is also required for all transactions, meaning all items will be paid for at the time of checkout before the sale is finalized.


At this time, we are legally required to charge all applicable sales tax for the state of Illinois. Taxes apply to your total order value, including processing and shipping charges
More Items!
Powered by Frooition.com
This listing is currently undergoing maintenance, we apologise for any inconvenience caused.