T10093 1/10 RC Alloy 2 Shoe 14T Clutch Kit Yellow Flywheel / Blue Shoes Bearings
This product data sheet is originally written in English.
2 Shoe Clutch Kit
To suit 1/10 scale models made by Hi Speed, will fit a few other models using a .12 to .18 size engine (not all). To help ensure a fit please check measurements below:
14T Clutch Housing - 20.4mm wide - outer diameter 28.1mm
2 x Ball Bearings included 10mm x 5mm x 4mm (ODxIDxW)
Lightweight alloy flywheel: Outer diameter 34.93mm - Center hole dia 5mm
Axle - to fit 5mm crankshaft thread - 21.43mm long (entire length)
Axle - requires (not included) M3 x 8 metric thread screw and a couple of washers
What to check to ensure a fit?
Check the crankshaft thread measures 5mm and that the crankshaft length will manage the axle + flywheel, so a minimum length of 12mm to 15mm. Longer than 15mm will prevent the flywheel axle from locking up correctly (leaving a spinning flywheel).
What engines will fit these fit?
.12 to .18 engines from the following makes have been checked to fit already:
SH / SMT / Ansmann / Team Infinity / SY / VX
Part Number: T10093
Material: Alloy
To suit 1/10 scale models made by Hi Speed, will fit a few other models using a .12 to .18 size engine (not all). To help ensure a fit please check measurements below: 14T Clutch Housing - 20.4mm wide - outer diameter 28.1mm 2 x Ball Bearings included 10mm x 5mm x 4mm (ODxIDxW) Lightweight alloy flywheel: Outer diameter 34.93mm - Center hole dia 5mm Axle - to fit 5mm crankshaft thread - 21.43mm long (entire length) Axle - requires (not included) M3 x 8 metric thread screw and a couple of washers Check the crankshaft thread measures 5mm and that the crankshaft length will manage the axle + flywheel, so a minimum length of 12mm to 15mm. Longer than 15mm will prevent the flywheel axle from locking up correctly (leaving a spinning flywheel). .12 to .18 engines from the following makes have b
To suit 1/10 scale models made by Hi Speed, will fit a few other models using a .12 to .18 size engine (not all). To help ensure a fit please check measurements below: 14T Clutch Housing - 20.4mm wide - outer diameter 28.1mm 2 x Ball Bearings included 10mm x 5mm x 4mm (ODxIDxW) Lightweight alloy flywheel: Outer diameter 34.93mm - Center hole dia 5mm Axle - to fit 5mm crankshaft thread - 21.43mm long (entire length) Axle - requires (not included) M3 x 8 metric thread screw and a couple of washers Check the crankshaft thread measures 5mm and that the crankshaft length will manage the axle + flywheel, so a minimum length of 12mm to 15mm. Longer than 15mm will prevent the flywheel axle from locking up correctly (leaving a spinning flywheel). .12 to .18 engines from the following makes have b
| Compatible Scale |
1:10 |
| Compatible Vehicle Type |
Cars & Motorcycles |
| EAN |
5055681396077 |
| MPN |
T10093 |
| Brand |
BSP |
| Compatible Brand |
Universal |
| Type |
Clutch Kits |
| Compatible Fuel Type |
All |