Feature:
This is a 12-volt learning 8-way wireless remote control switch with a 315MHZ remote control.

Specification:
Working voltage: 12V
Quiescent current: ≤10mAh
Working temperature: -20℃ -  +70℃
Working frequency: 315MHz, 433MHz optional (others can be customized)
Receiving sensitivity: -103dbm
Output current: ≤5A
Control voltage: AC and DC optional
When using, please press the learning button on the main board first, and then press the corresponding button on the remote control. You can use it after the learning light goes out.
Number of control channels: 8 channels
Control state: (1) Self-locking. (2) Non-locking. (3) Interlocking. The three states can be set by users according to their needs.

Description:
Output mode: divided into 4 types: jog, self-locking, interlocking, 4-way self-locking and 4-way interlocking
M) Inching: Long the remote control to turn on, release to turn off.
T) Self-locking: Press the remote control to open, press the remote control again to close.
L) Interlock: Press the first button of the remote control to turn on, press the second button of the remote control to turn off.
T+L) Self-locking interlock: 1/2/3/4 road self-locking, 5/6/7/8 road interlocking.
Learning mode: Remote control to code 8-channel controller, learning 1 channel defaults to other 7 channels.
1. Set to jog: short the jumper cap to M, press the learn code key, at this time the red light is off, the code can be coded within 7 seconds.
2. Set to self-locking: short-circuit the jumper cap with T, press the learn code key, at this time, the code can be coded within 7 seconds after the red light is off.
3. Set as interlock: do not insert the jumper cap, press the learn code key, at this time, the code can be coded within 7 seconds after the red light is off.
4. Set as self-locking and interlocking: insert 2 jumper caps, 1/2/3/4 way self-locking, 5/6/7/8 way interlocking.
5. Code clearing function: press and hold the learn code key for 10 seconds, the LED indicator flashes 5 times, clearing code is completed.
Note: When switching the working mode, please cut off the power, and then plug in the power to clear and match the code.

Package Included:
1* Remote receiver module (include chassis)
1* Remote control (include batteries)

Notes:
Please check as much as possible to ensure that it meets your needs.
Since it is a manual measurement, please allow slightly different sizes.
Due to the difference in lighting and screen, the color of the item may be slightly different from the picture.